#!/bin/sh
#
# (C) 2001 Luigi Rizzo, Gabriele Cecchetti
#	<Standard BSD copyright>
# Revised 2001.04.16
#
# $FreeBSD: src/share/examples/diskless/clone_root,v 1.1.2.4 2002/04/07 18:16:18 luigi Exp $
# $DragonFly: src/share/examples/diskless/clone_root,v 1.3 2006/10/24 17:09:45 swildner Exp $
#
# clone root filesystem for diskless root stuff
#
# usage
#	clone_root all		to do a full copy (e.g. bin, sbin...)
#	clone_root update	to recreate /var (including devices)
#	clone_root		to copy /conf and password-related files
#
# This script assumes that you use a shared readonly root and /usr
# partition. The script creates a partial clone of the root partition,
# and puts it into ${DEST} (defaults to /diskless_root ) on the server,
# where it is read.
#
# To run a diskless install you need to do the following:
#
# create /conf/default/etc/fstab
#    this will replace the standard /etc/fstab and should contain
#    as a minimum the following lines
#    ${SERVER}:${DEST} /     nfs    ro 0 0
#    ${SERVER}:/usr    /usr  nfs    ro 0 0
#    proc              /proc procfs rw 0 0
#
# create /conf/default/etc/rc.conf
#    this will replace the standard rc.conf and should contain
#    the startup options for the diskless client. Most likely
#    you will not need to set hostname and ifconfig_* because these
#    will be already set by the startup code. You will also
#    probably need to set local_startup="" so that the server's
#    local startup files will not be used.
#
# create a kernel config file in /sys/config/DISKLESS with
#	options MFS
#	options BOOTP
#	options BOOTP_NFSROOT
#	options BOOTP_COMPAT
# and do a full build of the kernel.
# If you use the firewall, remember to default to open or your kernel
# will not be able to send/receive the bootp packets.
#
# On the server:
# enable NFS server and set /etc/exports as
#	${DEST}	-ro -maproot=0 -alldirs <list of diskless clients>
#	/usr -ro -alldirs
#
# enable bootpd by uncommenting the bootps line in /etc/inetd.conf
# and putting at least the following entries in /etc/bootptab:
#  .default:\
#	hn:ht=1:vm=rfc1048:\
#	:sm=255.255.255.0:\
#	:sa=${SERVER}:\
#	:gw=${GATEWAY}:\
#	:rp="${SERVER}:${DEST}":
#
#  client1:ha=0123456789ab:tc=.default
#
# and make sure that client1 is listed in /etc/hosts

# VARIABLES:
#	some manual init is needed here.
# DEST	the diskless_root dir (goes into /etc/bootptab and /etc/exports
#	on the server)
# DEVICES	device entries to create in /dev
DEST=/diskless_root
DEVICES="all snd1 bktr0"

# you should not touch these vars:
# SYSDIRS	system directories and mountpoints
# DIRS		mountpoints (empty dirs)
# PWFILES	files related to passwords
# TOCOPY	files and dirs to copy from root partition

SYSDIRS="dev proc root usr var"
DIRS="cdrom home mnt"
PWFILES="master.passwd passwd spwd.db pwd.db"
TOCOPY="bin boot compat etc modules sbin stand sys"

init_diskless_root() {
	echo "Cleaning old diskless root ($DEST)"
	cd /
	rm -rf ${DEST} && echo "Old diskless root removed."
	echo "Creating $DEST..."
	mkdir -p $DEST && echo "New diskless root created."
	echo "+++ Now copy original tree from / ..."
	ex=""
	(cd / ; tar -clf - ${TOCOPY} ) | (cd $DEST; tar xvf - )
	#(cd / ; find -x dev | cpio -o -H newc ) | \
	#	(cd $DEST; cpio -i -H newc -d )
	echo "+++ Fixing permissions on some objects"
	chmod 555 $DEST/sbin/init
}

update_conf_and_pw() {
	echo "+++ Copying files in /conf and password files"
	(cd ${DEST} ; rm -rf conf )
	(cd / ; tar clf - conf ) | (cd ${DEST}; tar xvf - )
	mkdir -p ${DEST}/conf/base	# original copy of /etc
	(cd / ; tar clf - etc ) | (cd ${DEST}/conf/base && tar xvf - )
	mkdir -p ${DEST}/conf/etc	# used to mount things
	(cd /etc ; tar cvf - ${PWFILES} ) | (cd ${DEST}/etc ; tar xf - )
	(cd ${DEST}/conf/base ; find etc | cpio --create -H newc | \
		gzip > ${DEST}/conf/base/etc.cpio.gz )
	(cd ${DEST} ; find dev | cpio --create -H newc | \
		gzip > ${DEST}/conf/dev.cpio.gz )
}

update() {
	echo "+++ update: create mountpoints and device entries, kernel"
	for i in ${SYSDIRS} ${DIRS}
	do
	    rm -r -f ${DEST}/$i
	    mkdir -p ${DEST}/$i && chown root:wheel ${DEST}/$i && echo -n "$i "
	done
	echo "."
	ln -s /var/tmp ${DEST}/tmp
	echo "+++ Now use MAKEDEV to create devices ${DEVICES}"
	(cd $DEST/dev ; cp /dev/MAKEDEV . )
	(cd $DEST/dev ; /dev/MAKEDEV ${DEVICES} )
	(cd $DEST/dev ; ln -s /dev/sysmouse mouse )
	echo "+++ Copying kernel from /sys/compile/DISKLESS"
	cp /sys/compile/DISKLESS/kernel $DEST/kernel
	echo "."
}


# Main entry point
case $1 in
	all)	# clean and reinstall the whole diskless_root
		init_diskless_root
		update
		update_conf_and_pw
		;;

	update)	# clean and rebuild mountpoints and device entries
		update
		update_conf_and_pw
		;;

	*)	# copy /conf and password files
		update_conf_and_pw
		;;
esac
exit 0
### end of file ###