/* $FreeBSD$ */ /*- * Copyright (c) 2008 Hans Petter Selasky. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include "opt_ddb.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define USB_DEBUG_VAR usb_ctrl_debug #include #include #include #include #include #include #include #include #include #include #include #include "usb_if.h" /* function prototypes */ static device_probe_t usb_probe; static device_attach_t usb_attach; static device_detach_t usb_detach; static device_suspend_t usb_suspend; static device_resume_t usb_resume; static device_shutdown_t usb_shutdown; static void usb_attach_sub(device_t, struct usb_bus *); /* static variables */ #ifdef USB_DEBUG static int usb_ctrl_debug = 0; static SYSCTL_NODE(_hw_usb, OID_AUTO, ctrl, CTLFLAG_RW, 0, "USB controller"); SYSCTL_INT(_hw_usb_ctrl, OID_AUTO, debug, CTLFLAG_RW, &usb_ctrl_debug, 0, "Debug level"); #endif static int usb_no_boot_wait = 0; TUNABLE_INT("hw.usb.no_boot_wait", &usb_no_boot_wait); /* XXX freebsd uses CTLFLAG_RDTUN here */ SYSCTL_INT(_hw_usb, OID_AUTO, no_boot_wait, CTLFLAG_RW, &usb_no_boot_wait, 0, "No USB device enumerate waiting at boot."); static int usb_no_suspend_wait = 0; TUNABLE_INT("hw.usb.no_suspend_wait", &usb_no_suspend_wait); SYSCTL_INT(_hw_usb, OID_AUTO, no_suspend_wait, CTLFLAG_RW, &usb_no_suspend_wait, 0, "No USB device waiting at system suspend."); static int usb_no_shutdown_wait = 0; TUNABLE_INT("hw.usb.no_shutdown_wait", &usb_no_shutdown_wait); SYSCTL_INT(_hw_usb, OID_AUTO, no_shutdown_wait, CTLFLAG_RW, &usb_no_shutdown_wait, 0, "No USB device waiting at system shutdown."); static devclass_t usb_devclass; static device_method_t usb_methods[] = { DEVMETHOD(device_probe, usb_probe), DEVMETHOD(device_attach, usb_attach), DEVMETHOD(device_detach, usb_detach), DEVMETHOD(device_suspend, usb_suspend), DEVMETHOD(device_resume, usb_resume), DEVMETHOD(device_shutdown, usb_shutdown), DEVMETHOD_END }; static driver_t usb_driver = { .name = "usbus", .methods = usb_methods, .size = 0, }; /* Host Only Drivers */ DRIVER_MODULE(usbus, ohci, usb_driver, usb_devclass, NULL, NULL); DRIVER_MODULE(usbus, uhci, usb_driver, usb_devclass, NULL, NULL); DRIVER_MODULE(usbus, ehci, usb_driver, usb_devclass, NULL, NULL); DRIVER_MODULE(usbus, xhci, usb_driver, usb_devclass, NULL, NULL); #if 0 // XXX these are not ported yet (mpf) /* Device Only Drivers */ DRIVER_MODULE(usbus, at91_udp, usb_driver, usb_devclass, NULL, NULL); DRIVER_MODULE(usbus, musbotg, usb_driver, usb_devclass, NULL, NULL); DRIVER_MODULE(usbus, uss820, usb_driver, usb_devclass, NULL, NULL); DRIVER_MODULE(usbus, octusb, usb_driver, usb_devclass, NULL, NULL); /* Dual Mode Drivers */ DRIVER_MODULE(usbus, dwcotg, usb_driver, usb_devclass, NULL, NULL); #endif /*------------------------------------------------------------------------* * usb_probe * * This function is called from "{ehci,ohci,uhci}_pci_attach()". *------------------------------------------------------------------------*/ static int usb_probe(device_t dev) { DPRINTF("\n"); return (0); } #if USB_HAVE_ROOT_MOUNT_HOLD static void usb_root_mount_rel(struct usb_bus *bus) { if (bus->bus_roothold != NULL) { DPRINTF("Releasing root mount hold %p\n", bus->bus_roothold); root_mount_rel(bus->bus_roothold); bus->bus_roothold = NULL; } } #endif /*------------------------------------------------------------------------* * usb_attach *------------------------------------------------------------------------*/ static int usb_attach(device_t dev) { struct usb_bus *bus = device_get_ivars(dev); DPRINTF("\n"); if (bus == NULL) { device_printf(dev, "USB device has no ivars\n"); return (ENXIO); } #if USB_HAVE_ROOT_MOUNT_HOLD if (usb_no_boot_wait == 0) { /* delay vfs_mountroot until the bus is explored */ bus->bus_roothold = root_mount_hold(device_get_nameunit(dev)); } #endif usb_attach_sub(dev, bus); return (0); /* return success */ } /*------------------------------------------------------------------------* * usb_detach *------------------------------------------------------------------------*/ static int usb_detach(device_t dev) { struct usb_bus *bus = device_get_softc(dev); DPRINTF("\n"); if (bus == NULL) { /* was never setup properly */ return (0); } /* Stop power watchdog */ usb_callout_drain(&bus->power_wdog); #if USB_HAVE_ROOT_MOUNT_HOLD /* Let the USB explore process detach all devices. */ usb_root_mount_rel(bus); #endif USB_BUS_LOCK(bus); /* Queue detach job */ usb_proc_msignal(USB_BUS_EXPLORE_PROC(bus), &bus->detach_msg[0], &bus->detach_msg[1]); /* Wait for detach to complete */ usb_proc_mwait(USB_BUS_EXPLORE_PROC(bus), &bus->detach_msg[0], &bus->detach_msg[1]); #if USB_HAVE_UGEN /* Wait for cleanup to complete */ usb_proc_mwait(USB_BUS_EXPLORE_PROC(bus), &bus->cleanup_msg[0], &bus->cleanup_msg[1]); #endif USB_BUS_UNLOCK(bus); #if USB_HAVE_PER_BUS_PROCESS /* Get rid of USB callback processes */ usb_proc_free(USB_BUS_GIANT_PROC(bus)); usb_proc_free(USB_BUS_NON_GIANT_PROC(bus)); /* Get rid of USB explore process */ usb_proc_free(USB_BUS_EXPLORE_PROC(bus)); /* Get rid of control transfer process */ usb_proc_free(USB_BUS_CONTROL_XFER_PROC(bus)); #endif #if USB_HAVE_PF usbpf_detach(bus); #endif return (0); } /*------------------------------------------------------------------------* * usb_suspend *------------------------------------------------------------------------*/ static int usb_suspend(device_t dev) { struct usb_bus *bus = device_get_softc(dev); DPRINTF("\n"); if (bus == NULL) { /* was never setup properly */ return (0); } USB_BUS_LOCK(bus); usb_proc_msignal(USB_BUS_EXPLORE_PROC(bus), &bus->suspend_msg[0], &bus->suspend_msg[1]); if (usb_no_suspend_wait == 0) { /* wait for suspend callback to be executed */ usb_proc_mwait(USB_BUS_EXPLORE_PROC(bus), &bus->suspend_msg[0], &bus->suspend_msg[1]); } USB_BUS_UNLOCK(bus); return (0); } /*------------------------------------------------------------------------* * usb_resume *------------------------------------------------------------------------*/ static int usb_resume(device_t dev) { struct usb_bus *bus = device_get_softc(dev); DPRINTF("\n"); if (bus == NULL) { /* was never setup properly */ return (0); } USB_BUS_LOCK(bus); usb_proc_msignal(USB_BUS_EXPLORE_PROC(bus), &bus->resume_msg[0], &bus->resume_msg[1]); USB_BUS_UNLOCK(bus); return (0); } /*------------------------------------------------------------------------* * usb_bus_reset_async_locked *------------------------------------------------------------------------*/ void usb_bus_reset_async_locked(struct usb_bus *bus) { USB_BUS_LOCK_ASSERT(bus); DPRINTF("\n"); if (bus->reset_msg[0].hdr.pm_qentry.tqe_prev != NULL || bus->reset_msg[1].hdr.pm_qentry.tqe_prev != NULL) { DPRINTF("Reset already pending\n"); return; } device_printf(bus->parent, "Resetting controller\n"); usb_proc_msignal(USB_BUS_EXPLORE_PROC(bus), &bus->reset_msg[0], &bus->reset_msg[1]); } /*------------------------------------------------------------------------* * usb_shutdown *------------------------------------------------------------------------*/ static int usb_shutdown(device_t dev) { struct usb_bus *bus = device_get_softc(dev); DPRINTF("\n"); if (bus == NULL) { /* was never setup properly */ return (0); } device_printf(bus->bdev, "Controller shutdown\n"); USB_BUS_LOCK(bus); usb_proc_msignal(USB_BUS_EXPLORE_PROC(bus), &bus->shutdown_msg[0], &bus->shutdown_msg[1]); if (usb_no_shutdown_wait == 0) { /* wait for shutdown callback to be executed */ usb_proc_mwait(USB_BUS_EXPLORE_PROC(bus), &bus->shutdown_msg[0], &bus->shutdown_msg[1]); } USB_BUS_UNLOCK(bus); device_printf(bus->bdev, "Controller shutdown complete\n"); return (0); } /*------------------------------------------------------------------------* * usb_bus_explore * * This function is used to explore the device tree from the root. *------------------------------------------------------------------------*/ static void usb_bus_explore(struct usb_proc_msg *pm) { struct usb_bus *bus; struct usb_device *udev; bus = ((struct usb_bus_msg *)pm)->bus; udev = bus->devices[USB_ROOT_HUB_ADDR]; if (bus->no_explore != 0) return; if (udev && udev->hub) { if (bus->do_probe) { bus->do_probe = 0; bus->driver_added_refcount++; } if (bus->driver_added_refcount == 0) { /* avoid zero, hence that is memory default */ bus->driver_added_refcount = 1; } #ifdef DDB /* * The following three lines of code are only here to * recover from DDB: */ usb_proc_rewakeup(USB_BUS_CONTROL_XFER_PROC(bus)); usb_proc_rewakeup(USB_BUS_GIANT_PROC(bus)); usb_proc_rewakeup(USB_BUS_NON_GIANT_PROC(bus)); #endif USB_BUS_UNLOCK(bus); #if USB_HAVE_POWERD /* * First update the USB power state! */ usb_bus_powerd(bus); #endif /* Explore the Root USB HUB. */ (udev->hub->explore) (udev); USB_BUS_LOCK(bus); } /* * Interrupt config hook wakes up after the second bus exploration * completes. */ if (bus->do_hook > 0 && --bus->do_hook == 0) { config_intrhook_disestablish(&bus->hook); bus->hook.ich_func = NULL; } #if USB_HAVE_ROOT_MOUNT_HOLD usb_root_mount_rel(bus); #endif } /*------------------------------------------------------------------------* * usb_bus_detach * * This function is used to detach the device tree from the root. *------------------------------------------------------------------------*/ static void usb_bus_detach(struct usb_proc_msg *pm) { struct usb_bus *bus; struct usb_device *udev; device_t dev; bus = ((struct usb_bus_msg *)pm)->bus; udev = bus->devices[USB_ROOT_HUB_ADDR]; dev = bus->bdev; /* intr_config_hook */ if (bus->do_hook > 0) { bus->do_hook = -1; config_intrhook_disestablish(&bus->hook); } /* clear the softc */ device_set_softc(dev, NULL); USB_BUS_UNLOCK(bus); /* detach children first */ bus_generic_detach(dev); /* * Free USB device and all subdevices, if any. */ usb_free_device(udev, 0); USB_BUS_LOCK(bus); /* clear bdev variable last */ bus->bdev = NULL; } /*------------------------------------------------------------------------* * usb_bus_suspend * * This function is used to suspend the USB controller. *------------------------------------------------------------------------*/ static void usb_bus_suspend(struct usb_proc_msg *pm) { struct usb_bus *bus; struct usb_device *udev; usb_error_t err; uint8_t do_unlock; DPRINTF("\n"); bus = ((struct usb_bus_msg *)pm)->bus; udev = bus->devices[USB_ROOT_HUB_ADDR]; if (udev == NULL || bus->bdev == NULL) return; USB_BUS_UNLOCK(bus); /* * We use the shutdown event here because the suspend and * resume events are reserved for the USB port suspend and * resume. The USB system suspend is implemented like full * shutdown and all connected USB devices will be disconnected * subsequently. At resume all USB devices will be * re-connected again. */ bus_generic_shutdown(bus->bdev); do_unlock = usbd_enum_lock(udev); err = usbd_set_config_index(udev, USB_UNCONFIG_INDEX); if (err) device_printf(bus->bdev, "Could not unconfigure root HUB\n"); USB_BUS_LOCK(bus); bus->hw_power_state = 0; bus->no_explore = 1; USB_BUS_UNLOCK(bus); if (bus->methods->set_hw_power != NULL) (bus->methods->set_hw_power) (bus); if (bus->methods->set_hw_power_sleep != NULL) (bus->methods->set_hw_power_sleep) (bus, USB_HW_POWER_SUSPEND); if (do_unlock) usbd_enum_unlock(udev); USB_BUS_LOCK(bus); } /*------------------------------------------------------------------------* * usb_bus_resume * * This function is used to resume the USB controller. *------------------------------------------------------------------------*/ static void usb_bus_resume(struct usb_proc_msg *pm) { struct usb_bus *bus; struct usb_device *udev; usb_error_t err; uint8_t do_unlock; DPRINTF("\n"); bus = ((struct usb_bus_msg *)pm)->bus; udev = bus->devices[USB_ROOT_HUB_ADDR]; if (udev == NULL || bus->bdev == NULL) return; USB_BUS_UNLOCK(bus); do_unlock = usbd_enum_lock(udev); #if 0 DEVMETHOD(usb_take_controller, NULL); /* dummy */ #endif USB_TAKE_CONTROLLER(device_get_parent(bus->bdev)); USB_BUS_LOCK(bus); bus->hw_power_state = USB_HW_POWER_CONTROL | USB_HW_POWER_BULK | USB_HW_POWER_INTERRUPT | USB_HW_POWER_ISOC | USB_HW_POWER_NON_ROOT_HUB; bus->no_explore = 0; USB_BUS_UNLOCK(bus); if (bus->methods->set_hw_power_sleep != NULL) (bus->methods->set_hw_power_sleep) (bus, USB_HW_POWER_RESUME); if (bus->methods->set_hw_power != NULL) (bus->methods->set_hw_power) (bus); /* restore USB configuration to index 0 */ err = usbd_set_config_index(udev, 0); if (err) device_printf(bus->bdev, "Could not configure root HUB\n"); /* probe and attach */ err = usb_probe_and_attach(udev, USB_IFACE_INDEX_ANY); if (err) { device_printf(bus->bdev, "Could not probe and " "attach root HUB\n"); } if (do_unlock) usbd_enum_unlock(udev); USB_BUS_LOCK(bus); } /*------------------------------------------------------------------------* * usb_bus_reset * * This function is used to reset the USB controller. *------------------------------------------------------------------------*/ static void usb_bus_reset(struct usb_proc_msg *pm) { struct usb_bus *bus; DPRINTF("\n"); bus = ((struct usb_bus_msg *)pm)->bus; if (bus->bdev == NULL || bus->no_explore != 0) return; /* a suspend and resume will reset the USB controller */ usb_bus_suspend(pm); usb_bus_resume(pm); } /*------------------------------------------------------------------------* * usb_bus_shutdown * * This function is used to shutdown the USB controller. *------------------------------------------------------------------------*/ static void usb_bus_shutdown(struct usb_proc_msg *pm) { struct usb_bus *bus; struct usb_device *udev; usb_error_t err; uint8_t do_unlock; bus = ((struct usb_bus_msg *)pm)->bus; udev = bus->devices[USB_ROOT_HUB_ADDR]; if (udev == NULL || bus->bdev == NULL) return; USB_BUS_UNLOCK(bus); bus_generic_shutdown(bus->bdev); do_unlock = usbd_enum_lock(udev); err = usbd_set_config_index(udev, USB_UNCONFIG_INDEX); if (err) device_printf(bus->bdev, "Could not unconfigure root HUB\n"); USB_BUS_LOCK(bus); bus->hw_power_state = 0; bus->no_explore = 1; USB_BUS_UNLOCK(bus); if (bus->methods->set_hw_power != NULL) (bus->methods->set_hw_power) (bus); if (bus->methods->set_hw_power_sleep != NULL) (bus->methods->set_hw_power_sleep) (bus, USB_HW_POWER_SHUTDOWN); if (do_unlock) usbd_enum_unlock(udev); USB_BUS_LOCK(bus); } /*------------------------------------------------------------------------* * usb_bus_cleanup * * This function is used to cleanup leftover USB character devices. *------------------------------------------------------------------------*/ #if USB_HAVE_UGEN static void usb_bus_cleanup(struct usb_proc_msg *pm) { struct usb_bus *bus; struct usb_fs_privdata *pd; bus = ((struct usb_bus_msg *)pm)->bus; while ((pd = LIST_FIRST(&bus->pd_cleanup_list)) != NULL) { LIST_REMOVE(pd, pd_next); USB_BUS_UNLOCK(bus); usb_destroy_dev_sync(pd); USB_BUS_LOCK(bus); } } #endif static void usb_power_wdog(void *arg) { struct usb_bus *bus = arg; USB_BUS_LOCK_ASSERT(bus); usb_callout_reset(&bus->power_wdog, 4 * hz, usb_power_wdog, arg); #ifdef DDB /* * The following line of code is only here to recover from * DDB: */ usb_proc_rewakeup(USB_BUS_EXPLORE_PROC(bus)); /* recover from DDB */ #endif #if USB_HAVE_POWERD USB_BUS_UNLOCK(bus); usb_bus_power_update(bus); USB_BUS_LOCK(bus); #endif } /*------------------------------------------------------------------------* * usb_bus_attach * * This function attaches USB in context of the explore thread. *------------------------------------------------------------------------*/ static void usb_bus_attach(struct usb_proc_msg *pm) { struct usb_bus *bus; struct usb_device *child; device_t dev; usb_error_t err; enum usb_dev_speed speed; bus = ((struct usb_bus_msg *)pm)->bus; dev = bus->bdev; DPRINTF("\n"); switch (bus->usbrev) { case USB_REV_1_0: speed = USB_SPEED_FULL; device_printf(bus->bdev, "12Mbps Full Speed USB v1.0\n"); break; case USB_REV_1_1: speed = USB_SPEED_FULL; device_printf(bus->bdev, "12Mbps Full Speed USB v1.1\n"); break; case USB_REV_2_0: speed = USB_SPEED_HIGH; device_printf(bus->bdev, "480Mbps High Speed USB v2.0\n"); break; case USB_REV_2_5: speed = USB_SPEED_VARIABLE; device_printf(bus->bdev, "480Mbps Wireless USB v2.5\n"); break; case USB_REV_3_0: speed = USB_SPEED_SUPER; device_printf(bus->bdev, "5.0Gbps Super Speed USB v3.0\n"); break; default: device_printf(bus->bdev, "Unsupported USB revision\n"); #if USB_HAVE_ROOT_MOUNT_HOLD usb_root_mount_rel(bus); #endif return; } /* default power_mask value */ bus->hw_power_state = USB_HW_POWER_CONTROL | USB_HW_POWER_BULK | USB_HW_POWER_INTERRUPT | USB_HW_POWER_ISOC | USB_HW_POWER_NON_ROOT_HUB; USB_BUS_UNLOCK(bus); /* make sure power is set at least once */ if (bus->methods->set_hw_power != NULL) { (bus->methods->set_hw_power) (bus); } /* allocate the Root USB device */ child = usb_alloc_device(bus->bdev, bus, NULL, 0, 0, 1, speed, USB_MODE_HOST); if (child) { err = usb_probe_and_attach(child, USB_IFACE_INDEX_ANY); if (!err) { if ((bus->devices[USB_ROOT_HUB_ADDR] == NULL) || (bus->devices[USB_ROOT_HUB_ADDR]->hub == NULL)) { err = USB_ERR_NO_ROOT_HUB; } } } else { err = USB_ERR_NOMEM; } USB_BUS_LOCK(bus); if (err) { device_printf(bus->bdev, "Root HUB problem, error=%s\n", usbd_errstr(err)); #if USB_HAVE_ROOT_MOUNT_HOLD usb_root_mount_rel(bus); #endif } /* set softc - we are ready */ device_set_softc(dev, bus); /* start watchdog */ usb_power_wdog(bus); } /* * Hook signal (ignored) */ static void usb_intr_config_hook(void *arg) { } /*------------------------------------------------------------------------* * usb_attach_sub * * This function creates a thread which runs the USB attach code. *------------------------------------------------------------------------*/ static void usb_attach_sub(device_t dev, struct usb_bus *bus) { if (usb_devclass_ptr == NULL) usb_devclass_ptr = devclass_find("usbus"); #if USB_HAVE_PF usbpf_attach(bus); #endif /* Initialise USB process messages */ bus->explore_msg[0].hdr.pm_callback = &usb_bus_explore; bus->explore_msg[0].bus = bus; bus->explore_msg[1].hdr.pm_callback = &usb_bus_explore; bus->explore_msg[1].bus = bus; bus->detach_msg[0].hdr.pm_callback = &usb_bus_detach; bus->detach_msg[0].bus = bus; bus->detach_msg[1].hdr.pm_callback = &usb_bus_detach; bus->detach_msg[1].bus = bus; bus->attach_msg[0].hdr.pm_callback = &usb_bus_attach; bus->attach_msg[0].bus = bus; bus->attach_msg[1].hdr.pm_callback = &usb_bus_attach; bus->attach_msg[1].bus = bus; bus->suspend_msg[0].hdr.pm_callback = &usb_bus_suspend; bus->suspend_msg[0].bus = bus; bus->suspend_msg[1].hdr.pm_callback = &usb_bus_suspend; bus->suspend_msg[1].bus = bus; bus->resume_msg[0].hdr.pm_callback = &usb_bus_resume; bus->resume_msg[0].bus = bus; bus->resume_msg[1].hdr.pm_callback = &usb_bus_resume; bus->resume_msg[1].bus = bus; bus->reset_msg[0].hdr.pm_callback = &usb_bus_reset; bus->reset_msg[0].bus = bus; bus->reset_msg[1].hdr.pm_callback = &usb_bus_reset; bus->reset_msg[1].bus = bus; bus->shutdown_msg[0].hdr.pm_callback = &usb_bus_shutdown; bus->shutdown_msg[0].bus = bus; bus->shutdown_msg[1].hdr.pm_callback = &usb_bus_shutdown; bus->shutdown_msg[1].bus = bus; #if USB_HAVE_UGEN LIST_INIT(&bus->pd_cleanup_list); bus->cleanup_msg[0].hdr.pm_callback = &usb_bus_cleanup; bus->cleanup_msg[0].bus = bus; bus->cleanup_msg[1].hdr.pm_callback = &usb_bus_cleanup; bus->cleanup_msg[1].bus = bus; #endif /* * DragonFly - intr config hook, two explore passes. */ bzero(&bus->hook, sizeof(bus->hook)); bus->hook.ich_func = usb_intr_config_hook; bus->hook.ich_arg = bus; bus->hook.ich_desc = "usb"; if (config_intrhook_establish(&bus->hook) == 0) bus->do_hook = 2; else bus->do_hook = 0; #if USB_HAVE_PER_BUS_PROCESS /* Create USB explore and callback processes */ if (usb_proc_create(USB_BUS_GIANT_PROC(bus), &bus->bus_lock, device_get_nameunit(dev), USB_PRI_MED)) { device_printf(dev, "WARNING: Creation of USB Giant " "callback process failed.\n"); } else if (usb_proc_create(USB_BUS_NON_GIANT_PROC(bus), &bus->bus_lock, device_get_nameunit(dev), USB_PRI_HIGH)) { device_printf(dev, "WARNING: Creation of USB non-Giant " "callback process failed.\n"); } else if (usb_proc_create(USB_BUS_EXPLORE_PROC(bus), &bus->bus_lock, device_get_nameunit(dev), USB_PRI_MED)) { device_printf(dev, "WARNING: Creation of USB explore " "process failed.\n"); } else if (usb_proc_create(USB_BUS_CONTROL_XFER_PROC(bus), &bus->bus_lock, device_get_nameunit(dev), USB_PRI_MED)) { device_printf(dev, "WARNING: Creation of USB control transfer " "process failed.\n"); } else #endif { /* Get final attach going */ USB_BUS_LOCK(bus); usb_proc_msignal(USB_BUS_EXPLORE_PROC(bus), &bus->attach_msg[0], &bus->attach_msg[1]); USB_BUS_UNLOCK(bus); /* Do initial explore */ usb_needs_explore(bus, 1); } } SYSUNINIT(usb_bus_unload, SI_SUB_CONFIGURE, SI_ORDER_ANY, usb_bus_unload, NULL); /*------------------------------------------------------------------------* * usb_bus_mem_flush_all_cb *------------------------------------------------------------------------*/ #if USB_HAVE_BUSDMA static void usb_bus_mem_flush_all_cb(struct usb_bus *bus, struct usb_page_cache *pc, struct usb_page *pg, usb_size_t size, usb_size_t align) { usb_pc_cpu_flush(pc); } #endif /*------------------------------------------------------------------------* * usb_bus_mem_flush_all - factored out code *------------------------------------------------------------------------*/ #if USB_HAVE_BUSDMA void usb_bus_mem_flush_all(struct usb_bus *bus, usb_bus_mem_cb_t *cb) { if (cb) { cb(bus, &usb_bus_mem_flush_all_cb); } } #endif /*------------------------------------------------------------------------* * usb_bus_mem_alloc_all_cb *------------------------------------------------------------------------*/ #if USB_HAVE_BUSDMA static void usb_bus_mem_alloc_all_cb(struct usb_bus *bus, struct usb_page_cache *pc, struct usb_page *pg, usb_size_t size, usb_size_t align) { /* need to initialize the page cache */ pc->tag_parent = bus->dma_parent_tag; if (usb_pc_alloc_mem(pc, pg, size, align)) { bus->alloc_failed = 1; } } #endif /*------------------------------------------------------------------------* * usb_bus_mem_alloc_all - factored out code * * Returns: * 0: Success * Else: Failure *------------------------------------------------------------------------*/ uint8_t usb_bus_mem_alloc_all(struct usb_bus *bus, bus_dma_tag_t dmat, usb_bus_mem_cb_t *cb) { bus->alloc_failed = 0; lockinit(&bus->bus_lock, "USB bus mem", 0, LK_CANRECURSE); usb_callout_init_mtx(&bus->power_wdog, &bus->bus_lock, 0); TAILQ_INIT(&bus->intr_q.head); #if USB_HAVE_BUSDMA usb_dma_tag_setup(bus->dma_parent_tag, bus->dma_tags, dmat, &bus->bus_lock, NULL, bus->dma_bits, USB_BUS_DMA_TAG_MAX); #endif if ((bus->devices_max > USB_MAX_DEVICES) || (bus->devices_max < USB_MIN_DEVICES) || (bus->devices == NULL)) { DPRINTFN(0, "Devices field has not been " "initialised properly\n"); bus->alloc_failed = 1; /* failure */ } #if USB_HAVE_BUSDMA if (cb) { cb(bus, &usb_bus_mem_alloc_all_cb); } #endif if (bus->alloc_failed) { usb_bus_mem_free_all(bus, cb); } return (bus->alloc_failed); } /*------------------------------------------------------------------------* * usb_bus_mem_free_all_cb *------------------------------------------------------------------------*/ #if USB_HAVE_BUSDMA static void usb_bus_mem_free_all_cb(struct usb_bus *bus, struct usb_page_cache *pc, struct usb_page *pg, usb_size_t size, usb_size_t align) { usb_pc_free_mem(pc); } #endif /*------------------------------------------------------------------------* * usb_bus_mem_free_all - factored out code *------------------------------------------------------------------------*/ void usb_bus_mem_free_all(struct usb_bus *bus, usb_bus_mem_cb_t *cb) { #if USB_HAVE_BUSDMA if (cb) { cb(bus, &usb_bus_mem_free_all_cb); } usb_dma_tag_unsetup(bus->dma_parent_tag); #endif lockuninit(&bus->bus_lock); } /* convenience wrappers */ void usb_proc_explore_mwait(struct usb_device *udev, void *pm1, void *pm2) { usb_proc_mwait(USB_BUS_EXPLORE_PROC(udev->bus), pm1, pm2); } void * usb_proc_explore_msignal(struct usb_device *udev, void *pm1, void *pm2) { return (usb_proc_msignal(USB_BUS_EXPLORE_PROC(udev->bus), pm1, pm2)); } void usb_proc_explore_lock(struct usb_device *udev) { USB_BUS_LOCK(udev->bus); } void usb_proc_explore_unlock(struct usb_device *udev) { USB_BUS_UNLOCK(udev->bus); }