/****************************************************************************** * * Name: skgehw.h * Project: Gigabit Ethernet Adapters, Common Modules * Version: $Revision: 2.49 $ * Date: $Date: 2005/01/20 13:01:35 $ * Purpose: Defines and Macros for the Gigabit Ethernet Adapter Product Family * ******************************************************************************/ /****************************************************************************** * * LICENSE: * Copyright (C) Marvell International Ltd. and/or its affiliates * * The computer program files contained in this folder ("Files") * are provided to you under the BSD-type license terms provided * below, and any use of such Files and any derivative works * thereof created by you shall be governed by the following terms * and conditions: * * - Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * - Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials provided * with the distribution. * - Neither the name of Marvell nor the names of its contributors * may be used to endorse or promote products derived from this * software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. * /LICENSE * ******************************************************************************/ /*- * Copyright (c) 1997, 1998, 1999, 2000 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. */ /*- * Copyright (c) 2003 Nathan L. Binkert * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ /* $FreeBSD: src/sys/dev/msk/if_mskreg.h,v 1.11 2007/12/05 09:41:58 remko Exp $ */ /* * SysKonnect PCI vendor ID */ #define VENDORID_SK 0x1148 /* * Marvell PCI vendor ID */ #define VENDORID_MARVELL 0x11AB /* * D-Link PCI vendor ID */ #define VENDORID_DLINK 0x1186 /* * SysKonnect ethernet device IDs */ #define DEVICEID_SK_YUKON2 0x9000 #define DEVICEID_SK_YUKON2_EXPR 0x9e00 /* * Marvell gigabit ethernet device IDs */ #define DEVICEID_MRVL_8021CU 0x4340 #define DEVICEID_MRVL_8022CU 0x4341 #define DEVICEID_MRVL_8061CU 0x4342 #define DEVICEID_MRVL_8062CU 0x4343 #define DEVICEID_MRVL_8021X 0x4344 #define DEVICEID_MRVL_8022X 0x4345 #define DEVICEID_MRVL_8061X 0x4346 #define DEVICEID_MRVL_8062X 0x4347 #define DEVICEID_MRVL_8035 0x4350 #define DEVICEID_MRVL_8036 0x4351 #define DEVICEID_MRVL_8038 0x4352 #define DEVICEID_MRVL_8039 0x4353 #define DEVICEID_MRVL_8040 0x4354 #define DEVICEID_MRVL_8040T 0x4355 #define DEVICEID_MRVL_8042 0x4357 #define DEVICEID_MRVL_8048 0x435A #define DEVICEID_MRVL_4360 0x4360 #define DEVICEID_MRVL_4361 0x4361 #define DEVICEID_MRVL_4362 0x4362 #define DEVICEID_MRVL_4363 0x4363 #define DEVICEID_MRVL_4364 0x4364 #define DEVICEID_MRVL_4365 0x4365 #define DEVICEID_MRVL_436A 0x436A #define DEVICEID_MRVL_436B 0x436B #define DEVICEID_MRVL_436C 0x436C #define DEVICEID_MRVL_436D 0x436D #define DEVICEID_MRVL_4370 0x4370 #define DEVICEID_MRVL_4380 0x4380 #define DEVICEID_MRVL_4381 0x4381 /* * D-Link gigabit ethernet device ID */ #define DEVICEID_DLINK_DGE550SX 0x4001 #define DEVICEID_DLINK_DGE560T 0x4b00 #define BIT_31 (1 << 31) #define BIT_30 (1 << 30) #define BIT_29 (1 << 29) #define BIT_28 (1 << 28) #define BIT_27 (1 << 27) #define BIT_26 (1 << 26) #define BIT_25 (1 << 25) #define BIT_24 (1 << 24) #define BIT_23 (1 << 23) #define BIT_22 (1 << 22) #define BIT_21 (1 << 21) #define BIT_20 (1 << 20) #define BIT_19 (1 << 19) #define BIT_18 (1 << 18) #define BIT_17 (1 << 17) #define BIT_16 (1 << 16) #define BIT_15 (1 << 15) #define BIT_14 (1 << 14) #define BIT_13 (1 << 13) #define BIT_12 (1 << 12) #define BIT_11 (1 << 11) #define BIT_10 (1 << 10) #define BIT_9 (1 << 9) #define BIT_8 (1 << 8) #define BIT_7 (1 << 7) #define BIT_6 (1 << 6) #define BIT_5 (1 << 5) #define BIT_4 (1 << 4) #define BIT_3 (1 << 3) #define BIT_2 (1 << 2) #define BIT_1 (1 << 1) #define BIT_0 (1 << 0) #define SHIFT31(x) ((x) << 31) #define SHIFT30(x) ((x) << 30) #define SHIFT29(x) ((x) << 29) #define SHIFT28(x) ((x) << 28) #define SHIFT27(x) ((x) << 27) #define SHIFT26(x) ((x) << 26) #define SHIFT25(x) ((x) << 25) #define SHIFT24(x) ((x) << 24) #define SHIFT23(x) ((x) << 23) #define SHIFT22(x) ((x) << 22) #define SHIFT21(x) ((x) << 21) #define SHIFT20(x) ((x) << 20) #define SHIFT19(x) ((x) << 19) #define SHIFT18(x) ((x) << 18) #define SHIFT17(x) ((x) << 17) #define SHIFT16(x) ((x) << 16) #define SHIFT15(x) ((x) << 15) #define SHIFT14(x) ((x) << 14) #define SHIFT13(x) ((x) << 13) #define SHIFT12(x) ((x) << 12) #define SHIFT11(x) ((x) << 11) #define SHIFT10(x) ((x) << 10) #define SHIFT9(x) ((x) << 9) #define SHIFT8(x) ((x) << 8) #define SHIFT7(x) ((x) << 7) #define SHIFT6(x) ((x) << 6) #define SHIFT5(x) ((x) << 5) #define SHIFT4(x) ((x) << 4) #define SHIFT3(x) ((x) << 3) #define SHIFT2(x) ((x) << 2) #define SHIFT1(x) ((x) << 1) #define SHIFT0(x) ((x) << 0) /* * PCI Configuration Space header */ #define PCI_BASE_1ST 0x10 /* 32 bit 1st Base address */ #define PCI_BASE_2ND 0x14 /* 32 bit 2nd Base address */ #define PCI_OUR_REG_1 0x40 /* 32 bit Our Register 1 */ #define PCI_OUR_REG_2 0x44 /* 32 bit Our Register 2 */ #define PCI_OUR_STATUS 0x7c /* 32 bit Adapter Status Register */ #define PCI_OUR_REG_3 0x80 /* 32 bit Our Register 3 */ #define PCI_OUR_REG_4 0x84 /* 32 bit Our Register 4 */ #define PCI_OUR_REG_5 0x88 /* 32 bit Our Register 5 */ #define PCI_CFG_REG_0 0x90 /* 32 bit Config Register 0 */ #define PCI_CFG_REG_1 0x94 /* 32 bit Config Register 1 */ /* PCI Express Capability */ #define PEX_CAP_ID 0xe0 /* 8 bit PEX Capability ID */ #define PEX_NITEM 0xe1 /* 8 bit PEX Next Item Pointer */ #define PEX_CAP_REG 0xe2 /* 16 bit PEX Capability Register */ #define PEX_DEV_CAP 0xe4 /* 32 bit PEX Device Capabilities */ #define PEX_DEV_CTRL 0xe8 /* 16 bit PEX Device Control */ #define PEX_DEV_STAT 0xea /* 16 bit PEX Device Status */ #define PEX_LNK_CAP 0xec /* 32 bit PEX Link Capabilities */ #define PEX_LNK_CTRL 0xf0 /* 16 bit PEX Link Control */ #define PEX_LNK_STAT 0xf2 /* 16 bit PEX Link Status */ /* PCI Express Extended Capabilities */ #define PEX_ADV_ERR_REP 0x100 /* 32 bit PEX Advanced Error Reporting */ #define PEX_UNC_ERR_STAT 0x104 /* 32 bit PEX Uncorr. Errors Status */ #define PEX_UNC_ERR_MASK 0x108 /* 32 bit PEX Uncorr. Errors Mask */ #define PEX_UNC_ERR_SEV 0x10c /* 32 bit PEX Uncorr. Errors Severity */ #define PEX_COR_ERR_STAT 0x110 /* 32 bit PEX Correc. Errors Status */ #define PEX_COR_ERR_MASK 0x114 /* 32 bit PEX Correc. Errors Mask */ #define PEX_ADV_ERR_CAP_C 0x118 /* 32 bit PEX Advanced Error Cap./Ctrl */ #define PEX_HEADER_LOG 0x11c /* 4x32 bit PEX Header Log Register */ /* PCI_OUR_REG_1 32 bit Our Register 1 */ #define PCI_Y2_PIG_ENA BIT_31 /* Enable Plug-in-Go (YUKON-2) */ #define PCI_Y2_DLL_DIS BIT_30 /* Disable PCI DLL (YUKON-2) */ #define PCI_Y2_PHY2_COMA BIT_29 /* Set PHY 2 to Coma Mode (YUKON-2) */ #define PCI_Y2_PHY1_COMA BIT_28 /* Set PHY 1 to Coma Mode (YUKON-2) */ #define PCI_Y2_PHY2_POWD BIT_27 /* Set PHY 2 to Power Down (YUKON-2) */ #define PCI_Y2_PHY1_POWD BIT_26 /* Set PHY 1 to Power Down (YUKON-2) */ #define PCI_DIS_BOOT BIT_24 /* Disable BOOT via ROM */ #define PCI_EN_IO BIT_23 /* Mapping to I/O space */ #define PCI_EN_FPROM BIT_22 /* Enable FLASH mapping to memory */ /* 1 = Map Flash to memory */ /* 0 = Disable addr. dec */ #define PCI_PAGESIZE (3L<<20)/* Bit 21..20: FLASH Page Size */ #define PCI_PAGE_16 (0L<<20)/* 16 k pages */ #define PCI_PAGE_32K (1L<<20)/* 32 k pages */ #define PCI_PAGE_64K (2L<<20)/* 64 k pages */ #define PCI_PAGE_128K (3L<<20)/* 128 k pages */ #define PCI_PAGEREG (7L<<16)/* Bit 18..16: Page Register */ #define PCI_PEX_LEGNAT BIT_15 /* PEX PM legacy/native mode (YUKON-2) */ #define PCI_FORCE_BE BIT_14 /* Assert all BEs on MR */ #define PCI_DIS_MRL BIT_13 /* Disable Mem Read Line */ #define PCI_DIS_MRM BIT_12 /* Disable Mem Read Multiple */ #define PCI_DIS_MWI BIT_11 /* Disable Mem Write & Invalidate */ #define PCI_DISC_CLS BIT_10 /* Disc: cacheLsz bound */ #define PCI_BURST_DIS BIT_9 /* Burst Disable */ #define PCI_DIS_PCI_CLK BIT_8 /* Disable PCI clock driving */ #define PCI_SKEW_DAS (0xfL<<4)/* Bit 7.. 4: Skew Ctrl, DAS Ext */ #define PCI_SKEW_BASE 0xfL /* Bit 3.. 0: Skew Ctrl, Base */ #define PCI_CLS_OPT BIT_3 /* Cache Line Size opt. PCI-X (YUKON-2) */ /* PCI_OUR_REG_2 32 bit Our Register 2 */ #define PCI_VPD_WR_THR (0xff<<24) /* Bit 31..24: VPD Write Threshold */ #define PCI_DEV_SEL (0x7f<<17) /* Bit 23..17: EEPROM Device Select */ #define PCI_VPD_ROM_SZ (0x07<<14) /* Bit 16..14: VPD ROM Size */ /* Bit 13..12: reserved */ #define PCI_PATCH_DIR (0x0f<<8) /* Bit 11.. 8: Ext Patches dir 3..0 */ #define PCI_PATCH_DIR_3 BIT_11 #define PCI_PATCH_DIR_2 BIT_10 #define PCI_PATCH_DIR_1 BIT_9 #define PCI_PATCH_DIR_0 BIT_8 #define PCI_EXT_PATCHS (0x0f<<4) /* Bit 7.. 4: Extended Patches 3..0 */ #define PCI_EXT_PATCH_3 BIT_7 #define PCI_EXT_PATCH_2 BIT_6 #define PCI_EXT_PATCH_1 BIT_5 #define PCI_EXT_PATCH_0 BIT_4 #define PCI_EN_DUMMY_RD BIT_3 /* Enable Dummy Read */ #define PCI_REV_DESC BIT_2 /* Reverse Desc. Bytes */ #define PCI_USEDATA64 BIT_0 /* Use 64Bit Data bus ext */ /* PCI_OUR_STATUS 32 bit Adapter Status Register (Yukon-2) */ #define PCI_OS_PCI64B BIT_31 /* Conventional PCI 64 bits Bus */ #define PCI_OS_PCIX BIT_30 /* PCI-X Bus */ #define PCI_OS_MODE_MSK (3<<28) /* Bit 29..28: PCI-X Bus Mode Mask */ #define PCI_OS_PCI66M BIT_27 /* PCI 66 MHz Bus */ #define PCI_OS_PCI_X BIT_26 /* PCI/PCI-X Bus (0 = PEX) */ #define PCI_OS_DLLE_MSK (3<<24) /* Bit 25..24: DLL Status Indication */ #define PCI_OS_DLLR_MSK (0x0f<<20) /* Bit 23..20: DLL Row Counters Values */ #define PCI_OS_DLLC_MSK (0x0f<<16) /* Bit 19..16: DLL Col. Counters Values */ #define PCI_OS_SPEED(val) ((val & PCI_OS_MODE_MSK) >> 28) /* PCI-X Speed */ /* possible values for the speed field of the register */ #define PCI_OS_SPD_PCI 0 /* PCI Conventional Bus */ #define PCI_OS_SPD_X66 1 /* PCI-X 66MHz Bus */ #define PCI_OS_SPD_X100 2 /* PCI-X 100MHz Bus */ #define PCI_OS_SPD_X133 3 /* PCI-X 133MHz Bus */ /* PCI_OUR_REG_3 32 bit Our Register 3 (Yukon-ECU only) */ #define PCI_CLK_MACSEC_DIS BIT_17 /* Disable Clock MACSec. */ /* PCI_OUR_REG_4 32 bit Our Register 4 (Yukon-ECU only) */ #define PCI_TIMER_VALUE_MSK (0xff<<16) /* Bit 23..16: Timer Value Mask */ #define PCI_FORCE_ASPM_REQUEST BIT_15 /* Force ASPM Request (A1 only) */ #define PCI_ASPM_GPHY_LINK_DOWN BIT_14 /* GPHY Link Down (A1 only) */ #define PCI_ASPM_INT_FIFO_EMPTY BIT_13 /* Internal FIFO Empty (A1 only) */ #define PCI_ASPM_CLKRUN_REQUEST BIT_12 /* CLKRUN Request (A1 only) */ #define PCI_ASPM_FORCE_CLKREQ_ENA BIT_4 /* Force CLKREQ Enable (A1b only) */ #define PCI_ASPM_CLKREQ_PAD_CTL BIT_3 /* CLKREQ PAD Control (A1 only) */ #define PCI_ASPM_A1_MODE_SELECT BIT_2 /* A1 Mode Select (A1 only) */ #define PCI_CLK_GATE_PEX_UNIT_ENA BIT_1 /* Enable Gate PEX Unit Clock */ #define PCI_CLK_GATE_ROOT_COR_ENA BIT_0 /* Enable Gate Root Core Clock */ /* PCI_OUR_REG_5 32 bit Our Register 5 (Yukon-ECU only) */ /* Bit 31..27: for A3 & later */ #define PCI_CTL_DIV_CORE_CLK_ENA BIT_31 /* Divide Core Clock Enable */ #define PCI_CTL_SRESET_VMAIN_AV BIT_30 /* Soft Reset for Vmain_av De-Glitch */ #define PCI_CTL_BYPASS_VMAIN_AV BIT_29 /* Bypass En. for Vmain_av De-Glitch */ #define PCI_CTL_TIM_VMAIN_AV1 BIT_28 /* Bit 28..27: Timer Vmain_av Mask */ #define PCI_CTL_TIM_VMAIN_AV0 BIT_27 /* Bit 28..27: Timer Vmain_av Mask */ #define PCI_CTL_TIM_VMAIN_AV_MSK (BIT_28 | BIT_27) /* Bit 26..16: Release Clock on Event */ #define PCI_REL_PCIE_RST_DE_ASS BIT_26 /* PCIe Reset De-Asserted */ #define PCI_REL_GPHY_REC_PACKET BIT_25 /* GPHY Received Packet */ #define PCI_REL_INT_FIFO_N_EMPTY BIT_24 /* Internal FIFO Not Empty */ #define PCI_REL_MAIN_PWR_AVAIL BIT_23 /* Main Power Available */ #define PCI_REL_CLKRUN_REQ_REL BIT_22 /* CLKRUN Request Release */ #define PCI_REL_PCIE_RESET_ASS BIT_21 /* PCIe Reset Asserted */ #define PCI_REL_PME_ASSERTED BIT_20 /* PME Asserted */ #define PCI_REL_PCIE_EXIT_L1_ST BIT_19 /* PCIe Exit L1 State */ #define PCI_REL_LOADER_NOT_FIN BIT_18 /* EPROM Loader Not Finished */ #define PCI_REL_PCIE_RX_EX_IDLE BIT_17 /* PCIe Rx Exit Electrical Idle State */ #define PCI_REL_GPHY_LINK_UP BIT_16 /* GPHY Link Up */ /* Bit 10.. 0: Mask for Gate Clock */ #define PCI_GAT_PCIE_RST_ASSERTED BIT_10 /* PCIe Reset Asserted */ #define PCI_GAT_GPHY_N_REC_PACKET BIT_9 /* GPHY Not Received Packet */ #define PCI_GAT_INT_FIFO_EMPTY BIT_8 /* Internal FIFO Empty */ #define PCI_GAT_MAIN_PWR_N_AVAIL BIT_7 /* Main Power Not Available */ #define PCI_GAT_CLKRUN_REQ_REL BIT_6 /* CLKRUN Not Requested */ #define PCI_GAT_PCIE_RESET_ASS BIT_5 /* PCIe Reset Asserted */ #define PCI_GAT_PME_DE_ASSERTED BIT_4 /* PME De-Asserted */ #define PCI_GAT_PCIE_ENTER_L1_ST BIT_3 /* PCIe Enter L1 State */ #define PCI_GAT_LOADER_FINISHED BIT_2 /* EPROM Loader Finished */ #define PCI_GAT_PCIE_RX_EL_IDLE BIT_1 /* PCIe Rx Electrical Idle State */ #define PCI_GAT_GPHY_LINK_DOWN BIT_0 /* GPHY Link Down */ /* PCI_CFG_REG_1 32 bit Config Register 1 */ #define PCI_CF1_DIS_REL_EVT_RST BIT_24 /* Dis. Rel. Event during PCIE reset */ /* Bit 23..21: Release Clock on Event */ #define PCI_CF1_REL_LDR_NOT_FIN BIT_23 /* EEPROM Loader Not Finished */ #define PCI_CF1_REL_VMAIN_AVLBL BIT_22 /* Vmain available */ #define PCI_CF1_REL_PCIE_RESET BIT_21 /* PCI-E reset */ /* Bit 20..18: Gate Clock on Event */ #define PCI_CF1_GAT_LDR_NOT_FIN BIT_20 /* EEPROM Loader Finished */ #define PCI_CF1_GAT_PCIE_RX_IDLE BIT_19 /* PCI-E Rx Electrical idle */ #define PCI_CF1_GAT_PCIE_RESET BIT_18 /* PCI-E Reset */ #define PCI_CF1_PRST_PHY_CLKREQ BIT_17 /* Enable PCI-E rst & PM2PHY gen. CLKREQ */ #define PCI_CF1_PCIE_RST_CLKREQ BIT_16 /* Enable PCI-E rst generate CLKREQ */ #define PCI_CF1_ENA_CFG_LDR_DONE BIT_8 /* Enable core level Config loader done */ #define PCI_CF1_ENA_TXBMU_RD_IDLE BIT_1 /* Enable TX BMU Read IDLE for ASPM */ #define PCI_CF1_ENA_TXBMU_WR_IDLE BIT_0 /* Enable TX BMU Write IDLE for ASPM */ /* PEX_DEV_CTRL 16 bit PEX Device Control (Yukon-2) */ #define PEX_DC_MAX_RRS_MSK (7<<12) /* Bit 14..12: Max. Read Request Size */ #define PEX_DC_EN_NO_SNOOP BIT_11 /* Enable No Snoop */ #define PEX_DC_EN_AUX_POW BIT_10 /* Enable AUX Power */ #define PEX_DC_EN_PHANTOM BIT_9 /* Enable Phantom Functions */ #define PEX_DC_EN_EXT_TAG BIT_8 /* Enable Extended Tag Field */ #define PEX_DC_MAX_PLS_MSK (7<<5) /* Bit 7.. 5: Max. Payload Size Mask */ #define PEX_DC_EN_REL_ORD BIT_4 /* Enable Relaxed Ordering */ #define PEX_DC_EN_UNS_RQ_RP BIT_3 /* Enable Unsupported Request Reporting */ #define PEX_DC_EN_FAT_ER_RP BIT_2 /* Enable Fatal Error Reporting */ #define PEX_DC_EN_NFA_ER_RP BIT_1 /* Enable Non-Fatal Error Reporting */ #define PEX_DC_EN_COR_ER_RP BIT_0 /* Enable Correctable Error Reporting */ #define PEX_DC_MAX_RD_RQ_SIZE(x) (SHIFT12(x) & PEX_DC_MAX_RRS_MSK) /* PEX_LNK_STAT 16 bit PEX Link Status (Yukon-2) */ #define PEX_LS_SLOT_CLK_CFG BIT_12 /* Slot Clock Config */ #define PEX_LS_LINK_TRAIN BIT_11 /* Link Training */ #define PEX_LS_TRAIN_ERROR BIT_10 /* Training Error */ #define PEX_LS_LINK_WI_MSK (0x3f<<4) /* Bit 9.. 4: Neg. Link Width Mask */ #define PEX_LS_LINK_SP_MSK 0x0f /* Bit 3.. 0: Link Speed Mask */ /* PEX_UNC_ERR_STAT PEX Uncorrectable Errors Status Register (Yukon-2) */ #define PEX_UNSUP_REQ BIT_20 /* Unsupported Request Error */ #define PEX_MALFOR_TLP BIT_18 /* Malformed TLP */ #define PEX_RX_OV BIT_17 /* Receiver Overflow (not supported) */ #define PEX_UNEXP_COMP BIT_16 /* Unexpected Completion */ #define PEX_COMP_TO BIT_14 /* Completion Timeout */ #define PEX_FLOW_CTRL_P BIT_13 /* Flow Control Protocol Error */ #define PEX_POIS_TLP BIT_12 /* Poisoned TLP */ #define PEX_DATA_LINK_P BIT_4 /* Data Link Protocol Error */ #define PEX_FATAL_ERRORS (PEX_MALFOR_TLP | PEX_FLOW_CTRL_P | PEX_DATA_LINK_P) /* Control Register File (Address Map) */ /* * Bank 0 */ #define B0_RAP 0x0000 /* 8 bit Register Address Port */ #define B0_CTST 0x0004 /* 16 bit Control/Status register */ #define B0_LED 0x0006 /* 8 Bit LED register */ #define B0_POWER_CTRL 0x0007 /* 8 Bit Power Control reg (YUKON only) */ #define B0_ISRC 0x0008 /* 32 bit Interrupt Source Register */ #define B0_IMSK 0x000c /* 32 bit Interrupt Mask Register */ #define B0_HWE_ISRC 0x0010 /* 32 bit HW Error Interrupt Src Reg */ #define B0_HWE_IMSK 0x0014 /* 32 bit HW Error Interrupt Mask Reg */ #define B0_SP_ISRC 0x0018 /* 32 bit Special Interrupt Source Reg 1 */ /* Special ISR registers (Yukon-2 only) */ #define B0_Y2_SP_ISRC2 0x001c /* 32 bit Special Interrupt Source Reg 2 */ #define B0_Y2_SP_ISRC3 0x0020 /* 32 bit Special Interrupt Source Reg 3 */ #define B0_Y2_SP_EISR 0x0024 /* 32 bit Enter ISR Reg */ #define B0_Y2_SP_LISR 0x0028 /* 32 bit Leave ISR Reg */ #define B0_Y2_SP_ICR 0x002c /* 32 bit Interrupt Control Reg */ /* * Bank 1 * - completely empty (this is the RAP Block window) * Note: if RAP = 1 this page is reserved */ /* * Bank 2 */ /* NA reg = 48 bit Network Address Register, 3x16 or 8x8 bit readable */ #define B2_MAC_1 0x0100 /* NA reg MAC Address 1 */ #define B2_MAC_2 0x0108 /* NA reg MAC Address 2 */ #define B2_MAC_3 0x0110 /* NA reg MAC Address 3 */ #define B2_CONN_TYP 0x0118 /* 8 bit Connector type */ #define B2_PMD_TYP 0x0119 /* 8 bit PMD type */ #define B2_MAC_CFG 0x011a /* 8 bit MAC Configuration / Chip Revision */ #define B2_CHIP_ID 0x011b /* 8 bit Chip Identification Number */ #define B2_E_0 0x011c /* 8 bit EPROM Byte 0 (ext. SRAM size */ #define B2_Y2_CLK_GATE 0x011d /* 8 bit Clock Gating (Yukon-2) */ #define B2_Y2_HW_RES 0x011e /* 8 bit HW Resources (Yukon-2) */ #define B2_E_3 0x011f /* 8 bit EPROM Byte 3 */ #define B2_Y2_CLK_CTRL 0x0120 /* 32 bit Core Clock Frequency Control */ #define B2_TI_INI 0x0130 /* 32 bit Timer Init Value */ #define B2_TI_VAL 0x0134 /* 32 bit Timer Value */ #define B2_TI_CTRL 0x0138 /* 8 bit Timer Control */ #define B2_TI_TEST 0x0139 /* 8 Bit Timer Test */ #define B2_IRQM_INI 0x0140 /* 32 bit IRQ Moderation Timer Init Reg.*/ #define B2_IRQM_VAL 0x0144 /* 32 bit IRQ Moderation Timer Value */ #define B2_IRQM_CTRL 0x0148 /* 8 bit IRQ Moderation Timer Control */ #define B2_IRQM_TEST 0x0149 /* 8 bit IRQ Moderation Timer Test */ #define B2_IRQM_MSK 0x014c /* 32 bit IRQ Moderation Mask */ #define B2_IRQM_HWE_MSK 0x0150 /* 32 bit IRQ Moderation HW Error Mask */ #define B2_TST_CTRL1 0x0158 /* 8 bit Test Control Register 1 */ #define B2_TST_CTRL2 0x0159 /* 8 bit Test Control Register 2 */ #define B2_GP_IO 0x015c /* 32 bit General Purpose I/O Register */ #define B2_I2C_CTRL 0x0160 /* 32 bit I2C HW Control Register */ #define B2_I2C_DATA 0x0164 /* 32 bit I2C HW Data Register */ #define B2_I2C_IRQ 0x0168 /* 32 bit I2C HW IRQ Register */ #define B2_I2C_SW 0x016c /* 32 bit I2C SW Port Register */ #define Y2_PEX_PHY_DATA 0x0170 /* 16 bit PEX PHY Data Register */ #define Y2_PEX_PHY_ADDR 0x0172 /* 16 bit PEX PHY Address Register */ /* * Bank 3 */ /* RAM Random Registers */ #define B3_RAM_ADDR 0x0180 /* 32 bit RAM Address, to read or write */ #define B3_RAM_DATA_LO 0x0184 /* 32 bit RAM Data Word (low dWord) */ #define B3_RAM_DATA_HI 0x0188 /* 32 bit RAM Data Word (high dWord) */ #define SELECT_RAM_BUFFER(rb, addr) (addr | (rb << 6)) /* Yukon-2 only */ /* RAM Interface Registers */ /* Yukon-2: use SELECT_RAM_BUFFER() to access the RAM buffer */ /* * The HW-Spec. calls this registers Timeout Value 0..11. But this names are * not usable in SW. Please notice these are NOT real timeouts, these are * the number of qWords transferred continuously. */ #define B3_RI_WTO_R1 0x0190 /* 8 bit WR Timeout Queue R1 (TO0) */ #define B3_RI_WTO_XA1 0x0191 /* 8 bit WR Timeout Queue XA1 (TO1) */ #define B3_RI_WTO_XS1 0x0192 /* 8 bit WR Timeout Queue XS1 (TO2) */ #define B3_RI_RTO_R1 0x0193 /* 8 bit RD Timeout Queue R1 (TO3) */ #define B3_RI_RTO_XA1 0x0194 /* 8 bit RD Timeout Queue XA1 (TO4) */ #define B3_RI_RTO_XS1 0x0195 /* 8 bit RD Timeout Queue XS1 (TO5) */ #define B3_RI_WTO_R2 0x0196 /* 8 bit WR Timeout Queue R2 (TO6) */ #define B3_RI_WTO_XA2 0x0197 /* 8 bit WR Timeout Queue XA2 (TO7) */ #define B3_RI_WTO_XS2 0x0198 /* 8 bit WR Timeout Queue XS2 (TO8) */ #define B3_RI_RTO_R2 0x0199 /* 8 bit RD Timeout Queue R2 (TO9) */ #define B3_RI_RTO_XA2 0x019a /* 8 bit RD Timeout Queue XA2 (TO10)*/ #define B3_RI_RTO_XS2 0x019b /* 8 bit RD Timeout Queue XS2 (TO11)*/ #define B3_RI_TO_VAL 0x019c /* 8 bit Current Timeout Count Val */ #define B3_RI_CTRL 0x01a0 /* 16 bit RAM Interface Control Register */ #define B3_RI_TEST 0x01a2 /* 8 bit RAM Interface Test Register */ /* * Bank 4 - 5 */ /* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */ #define TXA_ITI_INI 0x0200 /* 32 bit Tx Arb Interval Timer Init Val*/ #define TXA_ITI_VAL 0x0204 /* 32 bit Tx Arb Interval Timer Value */ #define TXA_LIM_INI 0x0208 /* 32 bit Tx Arb Limit Counter Init Val */ #define TXA_LIM_VAL 0x020c /* 32 bit Tx Arb Limit Counter Value */ #define TXA_CTRL 0x0210 /* 8 bit Tx Arbiter Control Register */ #define TXA_TEST 0x0211 /* 8 bit Tx Arbiter Test Register */ #define TXA_STAT 0x0212 /* 8 bit Tx Arbiter Status Register */ #define MR_ADDR(Mac, Offs) (((Mac) << 7) + (Offs)) /* RSS key registers for Yukon-2 Family */ #define B4_RSS_KEY 0x0220 /* 4x32 bit RSS Key register (Yukon-2) */ /* RSS key register offsets */ #define KEY_IDX_0 0 /* offset for location of KEY 0 */ #define KEY_IDX_1 4 /* offset for location of KEY 1 */ #define KEY_IDX_2 8 /* offset for location of KEY 2 */ #define KEY_IDX_3 12 /* offset for location of KEY 3 */ /* 0x0280 - 0x0292: MAC 2 */ #define RSS_KEY_ADDR(Port, KeyIndex) \ ((B4_RSS_KEY | ( ((Port) == 0) ? 0 : 0x80)) + (KeyIndex)) /* * Bank 8 - 15 */ /* Receive and Transmit Queue Registers, use Q_ADDR() to access */ #define B8_Q_REGS 0x0400 /* Queue Register Offsets, use Q_ADDR() to access */ #define Q_D 0x00 /* 8*32 bit Current Descriptor */ #define Q_DA_L 0x20 /* 32 bit Current Descriptor Address Low dWord */ #define Q_DONE 0x24 /* 16 bit Done Index */ #define Q_AC_L 0x28 /* 32 bit Current Address Counter Low dWord */ #define Q_AC_H 0x2c /* 32 bit Current Address Counter High dWord */ #define Q_BC 0x30 /* 32 bit Current Byte Counter */ #define Q_CSR 0x34 /* 32 bit BMU Control/Status Register */ #define Q_F 0x38 /* 32 bit Flag Register */ #define Q_T1 0x3c /* 32 bit Test Register 1 */ #define Q_T1_TR 0x3c /* 8 bit Test Register 1 Transfer SM */ #define Q_T1_WR 0x3d /* 8 bit Test Register 1 Write Descriptor SM */ #define Q_T1_RD 0x3e /* 8 bit Test Register 1 Read Descriptor SM */ #define Q_T1_SV 0x3f /* 8 bit Test Register 1 Supervisor SM */ #define Q_WM 0x40 /* 16 bit FIFO Watermark */ #define Q_AL 0x42 /* 8 bit FIFO Alignment */ #define Q_RSP 0x44 /* 16 bit FIFO Read Shadow Pointer */ #define Q_RSL 0x46 /* 8 bit FIFO Read Shadow Level */ #define Q_RP 0x48 /* 8 bit FIFO Read Pointer */ #define Q_RL 0x4a /* 8 bit FIFO Read Level */ #define Q_WP 0x4c /* 8 bit FIFO Write Pointer */ #define Q_WSP 0x4d /* 8 bit FIFO Write Shadow Pointer */ #define Q_WL 0x4e /* 8 bit FIFO Write Level */ #define Q_WSL 0x4f /* 8 bit FIFO Write Shadow Level */ #define Q_ADDR(Queue, Offs) (B8_Q_REGS + (Queue) + (Offs)) /* Queue Prefetch Unit Offsets, use Y2_PREF_Q_ADDR() to address */ #define Y2_B8_PREF_REGS 0x0450 #define PREF_UNIT_CTRL_REG 0x00 /* 32 bit Prefetch Control register */ #define PREF_UNIT_LAST_IDX_REG 0x04 /* 16 bit Last Index */ #define PREF_UNIT_ADDR_LOW_REG 0x08 /* 32 bit List start addr, low part */ #define PREF_UNIT_ADDR_HI_REG 0x0c /* 32 bit List start addr, high part*/ #define PREF_UNIT_GET_IDX_REG 0x10 /* 16 bit Get Index */ #define PREF_UNIT_PUT_IDX_REG 0x14 /* 16 bit Put Index */ #define PREF_UNIT_FIFO_WP_REG 0x20 /* 8 bit FIFO write pointer */ #define PREF_UNIT_FIFO_RP_REG 0x24 /* 8 bit FIFO read pointer */ #define PREF_UNIT_FIFO_WM_REG 0x28 /* 8 bit FIFO watermark */ #define PREF_UNIT_FIFO_LEV_REG 0x2c /* 8 bit FIFO level */ #define PREF_UNIT_MASK_IDX 0x0fff #define Y2_PREF_Q_ADDR(Queue, Offs) (Y2_B8_PREF_REGS + (Queue) + (Offs)) /* * Bank 16 - 23 */ /* RAM Buffer Registers */ #define B16_RAM_REGS 0x0800 /* RAM Buffer Register Offsets, use RB_ADDR() to access */ #define RB_START 0x00 /* 32 bit RAM Buffer Start Address */ #define RB_END 0x04 /* 32 bit RAM Buffer End Address */ #define RB_WP 0x08 /* 32 bit RAM Buffer Write Pointer */ #define RB_RP 0x0c /* 32 bit RAM Buffer Read Pointer */ #define RB_RX_UTPP 0x10 /* 32 bit Rx Upper Threshold, Pause Packet */ #define RB_RX_LTPP 0x14 /* 32 bit Rx Lower Threshold, Pause Packet */ #define RB_RX_UTHP 0x18 /* 32 bit Rx Upper Threshold, High Prio */ #define RB_RX_LTHP 0x1c /* 32 bit Rx Lower Threshold, High Prio */ #define RB_PC 0x20 /* 32 bit RAM Buffer Packet Counter */ #define RB_LEV 0x24 /* 32 bit RAM Buffer Level Register */ #define RB_CTRL 0x28 /* 8 bit RAM Buffer Control Register */ #define RB_TST1 0x29 /* 8 bit RAM Buffer Test Register 1 */ #define RB_TST2 0x2a /* 8 bit RAM Buffer Test Register 2 */ /* * Bank 24 */ /* Receive GMAC FIFO (YUKON and Yukon-2), use MR_ADDR() to access */ #define RX_GMF_EA 0x0c40 /* 32 bit Rx GMAC FIFO End Address */ #define RX_GMF_AF_THR 0x0c44 /* 32 bit Rx GMAC FIFO Almost Full Thresh. */ #define RX_GMF_CTRL_T 0x0c48 /* 32 bit Rx GMAC FIFO Control/Test */ #define RX_GMF_FL_MSK 0x0c4c /* 32 bit Rx GMAC FIFO Flush Mask */ #define RX_GMF_FL_THR 0x0c50 /* 32 bit Rx GMAC FIFO Flush Threshold */ #define RX_GMF_TR_THR 0x0c54 /* 32 bit Rx Truncation Threshold (Yukon-2) */ #define RX_GMF_UP_THR 0x0c58 /* 16 bit Rx Upper Pause Thr (Yukon-EC_U) */ #define RX_GMF_LP_THR 0x0c5a /* 16 bit Rx Lower Pause Thr (Yukon-EC_U) */ #define RX_GMF_VLAN 0x0c5c /* 32 bit Rx VLAN Type Register (Yukon-2) */ #define RX_GMF_WP 0x0c60 /* 32 bit Rx GMAC FIFO Write Pointer */ #define RX_GMF_WLEV 0x0c68 /* 32 bit Rx GMAC FIFO Write Level */ #define RX_GMF_RP 0x0c70 /* 32 bit Rx GMAC FIFO Read Pointer */ #define RX_GMF_RLEV 0x0c78 /* 32 bit Rx GMAC FIFO Read Level */ /* * Bank 25 */ /* 0x0c80 - 0x0cbf: MAC 2 */ /* 0x0cc0 - 0x0cff: reserved */ /* * Bank 26 */ /* Transmit GMAC FIFO (YUKON and Yukon-2), use MR_ADDR() to access */ #define TX_GMF_EA 0x0d40 /* 32 bit Tx GMAC FIFO End Address */ #define TX_GMF_AE_THR 0x0d44 /* 32 bit Tx GMAC FIFO Almost Empty Thresh.*/ #define TX_GMF_CTRL_T 0x0d48 /* 32 bit Tx GMAC FIFO Control/Test */ #define TX_GMF_VLAN 0x0d5c /* 32 bit Tx VLAN Type Register (Yukon-2) */ #define TX_GMF_WP 0x0d60 /* 32 bit Tx GMAC FIFO Write Pointer */ #define TX_GMF_WSP 0x0d64 /* 32 bit Tx GMAC FIFO Write Shadow Pointer */ #define TX_GMF_WLEV 0x0d68 /* 32 bit Tx GMAC FIFO Write Level */ #define TX_GMF_RP 0x0d70 /* 32 bit Tx GMAC FIFO Read Pointer */ #define TX_GMF_RSTP 0x0d74 /* 32 bit Tx GMAC FIFO Restart Pointer */ #define TX_GMF_RLEV 0x0d78 /* 32 bit Tx GMAC FIFO Read Level */ /* * Bank 27 */ /* 0x0d80 - 0x0dbf: MAC 2 */ /* 0x0daa - 0x0dff: reserved */ /* * Bank 28 */ /* Descriptor Poll Timer Registers */ #define B28_DPT_INI 0x0e00 /* 24 bit Descriptor Poll Timer Init Val */ #define B28_DPT_VAL 0x0e04 /* 24 bit Descriptor Poll Timer Curr Val */ #define B28_DPT_CTRL 0x0e08 /* 8 bit Descriptor Poll Timer Ctrl Reg */ #define B28_DPT_TST 0x0e0a /* 8 bit Descriptor Poll Timer Test Reg */ /* Time Stamp Timer Registers (YUKON only) */ #define GMAC_TI_ST_VAL 0x0e14 /* 32 bit Time Stamp Timer Curr Val */ #define GMAC_TI_ST_CTRL 0x0e18 /* 8 bit Time Stamp Timer Ctrl Reg */ #define GMAC_TI_ST_TST 0x0e1a /* 8 bit Time Stamp Timer Test Reg */ /* Polling Unit Registers (Yukon-2 only) */ #define POLL_CTRL 0x0e20 /* 32 bit Polling Unit Control Reg */ #define POLL_LAST_IDX 0x0e24 /* 16 bit Polling Unit List Last Index */ #define POLL_LIST_ADDR_LO 0x0e28 /* 32 bit Poll. List Start Addr (low) */ #define POLL_LIST_ADDR_HI 0x0e2c /* 32 bit Poll. List Start Addr (high) */ /* ASF Subsystem Registers (Yukon-2 only) */ #define B28_Y2_SMB_CONFIG 0x0e40 /* 32 bit ASF SMBus Config Register */ #define B28_Y2_SMB_CSD_REG 0x0e44 /* 32 bit ASF SMB Control/Status/Data */ #define B28_Y2_CPU_WDOG 0x0e48 /* 32 bit Watchdog Register */ #define B28_Y2_ASF_IRQ_V_BASE 0x0e60 /* 32 bit ASF IRQ Vector Base */ #define B28_Y2_ASF_STAT_CMD 0x0e68 /* 32 bit ASF Status and Command Reg */ #define B28_Y2_ASF_HCU_CCSR 0x0e68 /* 32 bit ASF HCU CCSR (Yukon EX) */ #define B28_Y2_ASF_HOST_COM 0x0e6c /* 32 bit ASF Host Communication Reg */ #define B28_Y2_DATA_REG_1 0x0e70 /* 32 bit ASF/Host Data Register 1 */ #define B28_Y2_DATA_REG_2 0x0e74 /* 32 bit ASF/Host Data Register 2 */ #define B28_Y2_DATA_REG_3 0x0e78 /* 32 bit ASF/Host Data Register 3 */ #define B28_Y2_DATA_REG_4 0x0e7c /* 32 bit ASF/Host Data Register 4 */ /* * Bank 29 */ /* Status BMU Registers (Yukon-2 only)*/ #define STAT_CTRL 0x0e80 /* 32 bit Status BMU Control Reg */ #define STAT_LAST_IDX 0x0e84 /* 16 bit Status BMU Last Index */ #define STAT_LIST_ADDR_LO 0x0e88 /* 32 bit Status List Start Addr (low) */ #define STAT_LIST_ADDR_HI 0x0e8c /* 32 bit Status List Start Addr (high) */ #define STAT_TXA1_RIDX 0x0e90 /* 16 bit Status TxA1 Report Index Reg */ #define STAT_TXS1_RIDX 0x0e92 /* 16 bit Status TxS1 Report Index Reg */ #define STAT_TXA2_RIDX 0x0e94 /* 16 bit Status TxA2 Report Index Reg */ #define STAT_TXS2_RIDX 0x0e96 /* 16 bit Status TxS2 Report Index Reg */ #define STAT_TX_IDX_TH 0x0e98 /* 16 bit Status Tx Index Threshold Reg */ #define STAT_PUT_IDX 0x0e9c /* 16 bit Status Put Index Reg */ /* FIFO Control/Status Registers (Yukon-2 only)*/ #define STAT_FIFO_WP 0x0ea0 /* 8 bit Status FIFO Write Pointer Reg */ #define STAT_FIFO_RP 0x0ea4 /* 8 bit Status FIFO Read Pointer Reg */ #define STAT_FIFO_RSP 0x0ea6 /* 8 bit Status FIFO Read Shadow Ptr */ #define STAT_FIFO_LEVEL 0x0ea8 /* 8 bit Status FIFO Level Reg */ #define STAT_FIFO_SHLVL 0x0eaa /* 8 bit Status FIFO Shadow Level Reg */ #define STAT_FIFO_WM 0x0eac /* 8 bit Status FIFO Watermark Reg */ #define STAT_FIFO_ISR_WM 0x0ead /* 8 bit Status FIFO ISR Watermark Reg */ /* Level and ISR Timer Registers (Yukon-2 only)*/ #define STAT_LEV_TIMER_INI 0x0eb0 /* 32 bit Level Timer Init. Value Reg */ #define STAT_LEV_TIMER_CNT 0x0eb4 /* 32 bit Level Timer Counter Reg */ #define STAT_LEV_TIMER_CTRL 0x0eb8 /* 8 bit Level Timer Control Reg */ #define STAT_LEV_TIMER_TEST 0x0eb9 /* 8 bit Level Timer Test Reg */ #define STAT_TX_TIMER_INI 0x0ec0 /* 32 bit Tx Timer Init. Value Reg */ #define STAT_TX_TIMER_CNT 0x0ec4 /* 32 bit Tx Timer Counter Reg */ #define STAT_TX_TIMER_CTRL 0x0ec8 /* 8 bit Tx Timer Control Reg */ #define STAT_TX_TIMER_TEST 0x0ec9 /* 8 bit Tx Timer Test Reg */ #define STAT_ISR_TIMER_INI 0x0ed0 /* 32 bit ISR Timer Init. Value Reg */ #define STAT_ISR_TIMER_CNT 0x0ed4 /* 32 bit ISR Timer Counter Reg */ #define STAT_ISR_TIMER_CTRL 0x0ed8 /* 8 bit ISR Timer Control Reg */ #define STAT_ISR_TIMER_TEST 0x0ed9 /* 8 bit ISR Timer Test Reg */ #define ST_LAST_IDX_MASK 0x007f /* Last Index Mask */ #define ST_TXRP_IDX_MASK 0x0fff /* Tx Report Index Mask */ #define ST_TXTH_IDX_MASK 0x0fff /* Tx Threshold Index Mask */ #define ST_WM_IDX_MASK 0x3f /* FIFO Watermark Index Mask */ /* * Bank 30 */ /* GMAC and GPHY Control Registers (YUKON only) */ #define GMAC_CTRL 0x0f00 /* 32 bit GMAC Control Reg */ #define GPHY_CTRL 0x0f04 /* 32 bit GPHY Control Reg */ #define GMAC_IRQ_SRC 0x0f08 /* 8 bit GMAC Interrupt Source Reg */ #define GMAC_IRQ_MSK 0x0f0c /* 8 bit GMAC Interrupt Mask Reg */ #define GMAC_LINK_CTRL 0x0f10 /* 16 bit Link Control Reg */ /* Wake-up Frame Pattern Match Control Registers (YUKON only) */ #define WOL_REG_OFFS 0x20 /* HW-Bug: Address is + 0x20 against spec. */ #define WOL_CTRL_STAT 0x0f20 /* 16 bit WOL Control/Status Reg */ #define WOL_MATCH_CTL 0x0f22 /* 8 bit WOL Match Control Reg */ #define WOL_MATCH_RES 0x0f23 /* 8 bit WOL Match Result Reg */ #define WOL_MAC_ADDR_LO 0x0f24 /* 32 bit WOL MAC Address Low */ #define WOL_MAC_ADDR_HI 0x0f28 /* 16 bit WOL MAC Address High */ #define WOL_PATT_PME 0x0f2a /* 8 bit WOL PME Match Enable (Yukon-2) */ #define WOL_PATT_ASFM 0x0f2b /* 8 bit WOL ASF Match Enable (Yukon-2) */ #define WOL_PATT_RPTR 0x0f2c /* 8 bit WOL Pattern Read Pointer */ /* WOL Pattern Length Registers (YUKON only) */ #define WOL_PATT_LEN_LO 0x0f30 /* 32 bit WOL Pattern Length 3..0 */ #define WOL_PATT_LEN_HI 0x0f34 /* 24 bit WOL Pattern Length 6..4 */ /* WOL Pattern Counter Registers (YUKON only) */ #define WOL_PATT_CNT_0 0x0f38 /* 32 bit WOL Pattern Counter 3..0 */ #define WOL_PATT_CNT_4 0x0f3c /* 24 bit WOL Pattern Counter 6..4 */ /* * Bank 32 - 33 */ #define WOL_PATT_RAM_1 0x1000 /* WOL Pattern RAM Link 1 */ #define WOL_PATT_RAM_2 0x1400 /* WOL Pattern RAM Link 2 */ /* offset to configuration space on Yukon-2 */ #define Y2_CFG_SPC 0x1c00 #define BASE_GMAC_1 0x2800 /* GMAC 1 registers */ #define BASE_GMAC_2 0x3800 /* GMAC 2 registers */ /* * Control Register Bit Definitions: */ /* B0_CTST 24 bit Control/Status register */ #define Y2_VMAIN_AVAIL BIT_17 /* VMAIN available (YUKON-2 only) */ #define Y2_VAUX_AVAIL BIT_16 /* VAUX available (YUKON-2 only) */ #define Y2_HW_WOL_ON BIT_15 /* HW WOL On (Yukon-EC Ultra A1 only) */ #define Y2_HW_WOL_OFF BIT_14 /* HW WOL Off (Yukon-EC Ultra A1 only) */ #define Y2_ASF_ENABLE BIT_13 /* ASF Unit Enable (YUKON-2 only) */ #define Y2_ASF_DISABLE BIT_12 /* ASF Unit Disable (YUKON-2 only) */ #define Y2_CLK_RUN_ENA BIT_11 /* CLK_RUN Enable (YUKON-2 only) */ #define Y2_CLK_RUN_DIS BIT_10 /* CLK_RUN Disable (YUKON-2 only) */ #define Y2_LED_STAT_ON BIT_9 /* Status LED On (YUKON-2 only) */ #define Y2_LED_STAT_OFF BIT_8 /* Status LED Off (YUKON-2 only) */ #define CS_ST_SW_IRQ BIT_7 /* Set IRQ SW Request */ #define CS_CL_SW_IRQ BIT_6 /* Clear IRQ SW Request */ #define CS_STOP_DONE BIT_5 /* Stop Master is finished */ #define CS_STOP_MAST BIT_4 /* Command Bit to stop the master */ #define CS_MRST_CLR BIT_3 /* Clear Master Reset */ #define CS_MRST_SET BIT_2 /* Set Master Reset */ #define CS_RST_CLR BIT_1 /* Clear Software Reset */ #define CS_RST_SET BIT_0 /* Set Software Reset */ #define LED_STAT_ON BIT_1 /* Status LED On */ #define LED_STAT_OFF BIT_0 /* Status LED Off */ /* B0_POWER_CTRL 8 Bit Power Control reg (YUKON only) */ #define PC_VAUX_ENA BIT_7 /* Switch VAUX Enable */ #define PC_VAUX_DIS BIT_6 /* Switch VAUX Disable */ #define PC_VCC_ENA BIT_5 /* Switch VCC Enable */ #define PC_VCC_DIS BIT_4 /* Switch VCC Disable */ #define PC_VAUX_ON BIT_3 /* Switch VAUX On */ #define PC_VAUX_OFF BIT_2 /* Switch VAUX Off */ #define PC_VCC_ON BIT_1 /* Switch VCC On */ #define PC_VCC_OFF BIT_0 /* Switch VCC Off */ /* B0_ISRC 32 bit Interrupt Source Register */ /* B0_IMSK 32 bit Interrupt Mask Register */ /* B0_SP_ISRC 32 bit Special Interrupt Source Reg */ /* B2_IRQM_MSK 32 bit IRQ Moderation Mask */ /* B0_Y2_SP_ISRC2 32 bit Special Interrupt Source Reg 2 */ /* B0_Y2_SP_ISRC3 32 bit Special Interrupt Source Reg 3 */ /* B0_Y2_SP_EISR 32 bit Enter ISR Reg */ /* B0_Y2_SP_LISR 32 bit Leave ISR Reg */ #define Y2_IS_PORT_MASK(Port, Mask) ((Mask) << (Port*8)) #define Y2_IS_HW_ERR BIT_31 /* Interrupt HW Error */ #define Y2_IS_STAT_BMU BIT_30 /* Status BMU Interrupt */ #define Y2_IS_ASF BIT_29 /* ASF subsystem Interrupt */ #define Y2_IS_POLL_CHK BIT_27 /* Check IRQ from polling unit */ #define Y2_IS_TWSI_RDY BIT_26 /* IRQ on end of TWSI Tx */ #define Y2_IS_IRQ_SW BIT_25 /* SW forced IRQ */ #define Y2_IS_TIMINT BIT_24 /* IRQ from Timer */ #define Y2_IS_IRQ_PHY2 BIT_12 /* Interrupt from PHY 2 */ #define Y2_IS_IRQ_MAC2 BIT_11 /* Interrupt from MAC 2 */ #define Y2_IS_CHK_RX2 BIT_10 /* Descriptor error Rx 2 */ #define Y2_IS_CHK_TXS2 BIT_9 /* Descriptor error TXS 2 */ #define Y2_IS_CHK_TXA2 BIT_8 /* Descriptor error TXA 2 */ #define Y2_IS_PSM_ACK BIT_7 /* PSM Ack (Yukon Optima) */ #define Y2_IS_PTP_TIST BIT_6 /* PTP TIme Stamp (Yukon Optima) */ #define Y2_IS_PHY_QLNK BIT_5 /* PHY Quick Link (Yukon Optima) */ #define Y2_IS_IRQ_PHY1 BIT_4 /* Interrupt from PHY 1 */ #define Y2_IS_IRQ_MAC1 BIT_3 /* Interrupt from MAC 1 */ #define Y2_IS_CHK_RX1 BIT_2 /* Descriptor error Rx 1 */ #define Y2_IS_CHK_TXS1 BIT_1 /* Descriptor error TXS 1 */ #define Y2_IS_CHK_TXA1 BIT_0 /* Descriptor error TXA 1 */ #define Y2_IS_L1_MASK 0x0000001f /* IRQ Mask for port 1 */ #define Y2_IS_L2_MASK 0x00001f00 /* IRQ Mask for port 2 */ #define Y2_IS_ALL_MSK 0xef001f1f /* All Interrupt bits */ #define Y2_IS_PORT_A \ (Y2_IS_IRQ_PHY1 | Y2_IS_IRQ_MAC1 | Y2_IS_CHK_TXA1 | Y2_IS_CHK_RX1) #define Y2_IS_PORT_B \ (Y2_IS_IRQ_PHY2 | Y2_IS_IRQ_MAC2 | Y2_IS_CHK_TXA2 | Y2_IS_CHK_RX2) /* B0_HWE_ISRC 32 bit HW Error Interrupt Src Reg */ /* B0_HWE_IMSK 32 bit HW Error Interrupt Mask Reg */ /* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */ #define Y2_IS_TIST_OV BIT_29 /* Time Stamp Timer overflow interrupt */ #define Y2_IS_SENSOR BIT_28 /* Sensor interrupt */ #define Y2_IS_MST_ERR BIT_27 /* Master error interrupt */ #define Y2_IS_IRQ_STAT BIT_26 /* Status exception interrupt */ #define Y2_IS_PCI_EXP BIT_25 /* PCI-Express interrupt */ #define Y2_IS_PCI_NEXP BIT_24 /* PCI-Express error similar to PCI error */ #define Y2_IS_PAR_RD2 BIT_13 /* Read RAM parity error interrupt */ #define Y2_IS_PAR_WR2 BIT_12 /* Write RAM parity error interrupt */ #define Y2_IS_PAR_MAC2 BIT_11 /* MAC hardware fault interrupt */ #define Y2_IS_PAR_RX2 BIT_10 /* Parity Error Rx Queue 2 */ #define Y2_IS_TCP_TXS2 BIT_9 /* TCP length mismatch sync Tx queue IRQ */ #define Y2_IS_TCP_TXA2 BIT_8 /* TCP length mismatch async Tx queue IRQ */ #define Y2_IS_PAR_RD1 BIT_5 /* Read RAM parity error interrupt */ #define Y2_IS_PAR_WR1 BIT_4 /* Write RAM parity error interrupt */ #define Y2_IS_PAR_MAC1 BIT_3 /* MAC hardware fault interrupt */ #define Y2_IS_PAR_RX1 BIT_2 /* Parity Error Rx Queue 1 */ #define Y2_IS_TCP_TXS1 BIT_1 /* TCP length mismatch sync Tx queue IRQ */ #define Y2_IS_TCP_TXA1 BIT_0 /* TCP length mismatch async Tx queue IRQ */ #define Y2_HWE_L1_MASK (Y2_IS_PAR_RD1 | Y2_IS_PAR_WR1 | Y2_IS_PAR_MAC1 |\ Y2_IS_PAR_RX1 | Y2_IS_TCP_TXS1| Y2_IS_TCP_TXA1) #define Y2_HWE_L2_MASK (Y2_IS_PAR_RD2 | Y2_IS_PAR_WR2 | Y2_IS_PAR_MAC2 |\ Y2_IS_PAR_RX2 | Y2_IS_TCP_TXS2| Y2_IS_TCP_TXA2) #define Y2_HWE_ALL_MSK (Y2_IS_TIST_OV | /* Y2_IS_SENSOR | */ Y2_IS_MST_ERR |\ Y2_IS_IRQ_STAT | Y2_IS_PCI_EXP | Y2_IS_PCI_NEXP |\ Y2_HWE_L1_MASK | Y2_HWE_L2_MASK) /* B2_MAC_CFG 8 bit MAC Configuration / Chip Revision */ #define CFG_CHIP_R_MSK (0x0f<<4) /* Bit 7.. 4: Chip Revision */ #define CFG_DIS_M2_CLK BIT_1 /* Disable Clock for 2nd MAC */ #define CFG_SNG_MAC BIT_0 /* MAC Config: 0 = 2 MACs; 1 = 1 MAC */ /* B2_CHIP_ID 8 bit Chip Identification Number */ #define CHIP_ID_GENESIS 0x0a /* Chip ID for GENESIS */ #define CHIP_ID_YUKON 0xb0 /* Chip ID for YUKON */ #define CHIP_ID_YUKON_LITE 0xb1 /* Chip ID for YUKON-Lite (Rev. A1-A3) */ #define CHIP_ID_YUKON_LP 0xb2 /* Chip ID for YUKON-LP */ #define CHIP_ID_YUKON_XL 0xb3 /* Chip ID for YUKON-2 XL */ #define CHIP_ID_YUKON_EC_U 0xb4 /* Chip ID for YUKON-2 EC Ultra */ #define CHIP_ID_YUKON_EX 0xb5 /* Chip ID for YUKON-2 Extreme */ #define CHIP_ID_YUKON_EC 0xb6 /* Chip ID for YUKON-2 EC */ #define CHIP_ID_YUKON_FE 0xb7 /* Chip ID for YUKON-2 FE */ #define CHIP_ID_YUKON_FE_P 0xb8 /* Chip ID for YUKON-2 FE+ */ #define CHIP_ID_YUKON_SUPR 0xb9 /* Chip ID for YUKON-2 Supreme */ #define CHIP_ID_YUKON_UL_2 0xba /* Chip ID for YUKON-2 Ultra 2 */ #define CHIP_ID_YUKON_UNKNOWN 0xbb #define CHIP_ID_YUKON_OPT 0xbc /* Chip ID for YUKON-2 Optima */ #define CHIP_REV_YU_XL_A0 0 /* Chip Rev. for Yukon-2 A0 */ #define CHIP_REV_YU_XL_A1 1 /* Chip Rev. for Yukon-2 A1 */ #define CHIP_REV_YU_XL_A2 2 /* Chip Rev. for Yukon-2 A2 */ #define CHIP_REV_YU_XL_A3 3 /* Chip Rev. for Yukon-2 A3 */ #define CHIP_REV_YU_EC_A1 0 /* Chip Rev. for Yukon-EC A1/A0 */ #define CHIP_REV_YU_EC_A2 1 /* Chip Rev. for Yukon-EC A2 */ #define CHIP_REV_YU_EC_A3 2 /* Chip Rev. for Yukon-EC A3 */ #define CHIP_REV_YU_EC_U_A0 1 #define CHIP_REV_YU_EC_U_A1 2 #define CHIP_REV_YU_FE_P_A0 0 /* Chip Rev. for Yukon-2 FE+ A0 */ #define CHIP_REV_YU_EX_A0 1 /* Chip Rev. for Yukon-2 EX A0 */ #define CHIP_REV_YU_EX_B0 2 /* Chip Rev. for Yukon-2 EX B0 */ #define CHIP_REV_YU_SU_A0 0 /* Chip Rev. for Yukon-2 SUPR A0 */ #define CHIP_REV_YU_SU_B0 1 /* Chip Rev. for Yukon-2 SUPR B0 */ #define CHIP_REV_YU_SU_B1 3 /* Chip Rev. for Yukon-2 SUPR B1 */ /* B2_Y2_CLK_GATE 8 bit Clock Gating (Yukon-2 only) */ #define Y2_STATUS_LNK2_INAC BIT_7 /* Status Link 2 inactiv (0 = activ) */ #define Y2_CLK_GAT_LNK2_DIS BIT_6 /* Disable clock gating Link 2 */ #define Y2_COR_CLK_LNK2_DIS BIT_5 /* Disable Core clock Link 2 */ #define Y2_PCI_CLK_LNK2_DIS BIT_4 /* Disable PCI clock Link 2 */ #define Y2_STATUS_LNK1_INAC BIT_3 /* Status Link 1 inactiv (0 = activ) */ #define Y2_CLK_GAT_LNK1_DIS BIT_2 /* Disable clock gating Link 1 */ #define Y2_COR_CLK_LNK1_DIS BIT_1 /* Disable Core clock Link 1 */ #define Y2_PCI_CLK_LNK1_DIS BIT_0 /* Disable PCI clock Link 1 */ /* B2_Y2_HW_RES 8 bit HW Resources (Yukon-2 only) */ #define CFG_LED_MODE_MSK (0x07<<2) /* Bit 4.. 2: LED Mode Mask */ #define CFG_LINK_2_AVAIL BIT_1 /* Link 2 available */ #define CFG_LINK_1_AVAIL BIT_0 /* Link 1 available */ #define CFG_LED_MODE(x) (((x) & CFG_LED_MODE_MSK) >> 2) #define CFG_DUAL_MAC_MSK (CFG_LINK_2_AVAIL | CFG_LINK_1_AVAIL) /* B2_E_3 8 bit lower 4 bits used for HW self test result */ #define B2_E3_RES_MASK 0x0f /* B2_Y2_CLK_CTRL 32 bit Core Clock Frequency Control Register (Yukon-2/EC) */ /* Yukon-EC/FE */ #define Y2_CLK_DIV_VAL_MSK (0xff<<16) /* Bit 23..16: Clock Divisor Value */ #define Y2_CLK_DIV_VAL(x) (SHIFT16(x) & Y2_CLK_DIV_VAL_MSK) /* Yukon-2 */ #define Y2_CLK_DIV_VAL2_MSK (0x07<<21) /* Bit 23..21: Clock Divisor Value */ #define Y2_CLK_SELECT2_MSK (0x1f<<16) /* Bit 20..16: Clock Select */ #define Y2_CLK_DIV_VAL_2(x) (SHIFT21(x) & Y2_CLK_DIV_VAL2_MSK) #define Y2_CLK_SEL_VAL_2(x) (SHIFT16(x) & Y2_CLK_SELECT2_MSK) #define Y2_CLK_DIV_ENA BIT_1 /* Enable Core Clock Division */ #define Y2_CLK_DIV_DIS BIT_0 /* Disable Core Clock Division */ /* B2_TI_CTRL 8 bit Timer control */ /* B2_IRQM_CTRL 8 bit IRQ Moderation Timer Control */ #define TIM_START BIT_2 /* Start Timer */ #define TIM_STOP BIT_1 /* Stop Timer */ #define TIM_CLR_IRQ BIT_0 /* Clear Timer IRQ (!IRQM) */ /* B2_TI_TEST 8 Bit Timer Test */ /* B2_IRQM_TEST 8 bit IRQ Moderation Timer Test */ /* B28_DPT_TST 8 bit Descriptor Poll Timer Test Reg */ #define TIM_T_ON BIT_2 /* Test mode on */ #define TIM_T_OFF BIT_1 /* Test mode off */ #define TIM_T_STEP BIT_0 /* Test step */ /* B28_DPT_INI 32 bit Descriptor Poll Timer Init Val */ /* B28_DPT_VAL 32 bit Descriptor Poll Timer Curr Val */ #define DPT_MSK 0x00ffffff /* Bit 23.. 0: Desc Poll Timer Bits */ /* B28_DPT_CTRL 8 bit Descriptor Poll Timer Ctrl Reg */ #define DPT_START BIT_1 /* Start Descriptor Poll Timer */ #define DPT_STOP BIT_0 /* Stop Descriptor Poll Timer */ /* B2_TST_CTRL1 8 bit Test Control Register 1 */ #define TST_FRC_DPERR_MR BIT_7 /* force DATAPERR on MST RD */ #define TST_FRC_DPERR_MW BIT_6 /* force DATAPERR on MST WR */ #define TST_FRC_DPERR_TR BIT_5 /* force DATAPERR on TRG RD */ #define TST_FRC_DPERR_TW BIT_4 /* force DATAPERR on TRG WR */ #define TST_FRC_APERR_M BIT_3 /* force ADDRPERR on MST */ #define TST_FRC_APERR_T BIT_2 /* force ADDRPERR on TRG */ #define TST_CFG_WRITE_ON BIT_1 /* Enable Config Reg WR */ #define TST_CFG_WRITE_OFF BIT_0 /* Disable Config Reg WR */ /* B2_GP_IO */ #define GLB_GPIO_CLK_DEB_ENA BIT_31 /* Clock Debug Enable */ #define GLB_GPIO_CLK_DBG_MSK 0x3c000000 /* Clock Debug */ #define GLB_GPIO_INT_RST_D3_DIS BIT_15 /* Disable Internal Reset After D3 to D0 */ #define GLB_GPIO_LED_PAD_SPEED_UP BIT_14 /* LED PAD Speed Up */ #define GLB_GPIO_STAT_RACE_DIS BIT_13 /* Status Race Disable */ #define GLB_GPIO_TEST_SEL_MSK 0x00001800 /* Testmode Select */ #define GLB_GPIO_TEST_SEL_BASE BIT_11 #define GLB_GPIO_RAND_ENA BIT_10 /* Random Enable */ #define GLB_GPIO_RAND_BIT_1 BIT_9 /* Random Bit 1 */ /* B2_I2C_CTRL 32 bit I2C HW Control Register */ #define I2C_FLAG BIT_31 /* Start read/write if WR */ #define I2C_ADDR (0x7fff<<16) /* Bit 30..16: Addr to be RD/WR */ #define I2C_DEV_SEL (0x7f<<9) /* Bit 15.. 9: I2C Device Select */ #define I2C_BURST_LEN BIT_4 /* Burst Len, 1/4 bytes */ #define I2C_DEV_SIZE (7<<1) /* Bit 3.. 1: I2C Device Size */ #define I2C_025K_DEV (0<<1) /* 0: 256 Bytes or smal. */ #define I2C_05K_DEV (1<<1) /* 1: 512 Bytes */ #define I2C_1K_DEV (2<<1) /* 2: 1024 Bytes */ #define I2C_2K_DEV (3<<1) /* 3: 2048 Bytes */ #define I2C_4K_DEV (4<<1) /* 4: 4096 Bytes */ #define I2C_8K_DEV (5<<1) /* 5: 8192 Bytes */ #define I2C_16K_DEV (6<<1) /* 6: 16384 Bytes */ #define I2C_32K_DEV (7<<1) /* 7: 32768 Bytes */ #define I2C_STOP BIT_0 /* Interrupt I2C transfer */ /* B2_I2C_IRQ 32 bit I2C HW IRQ Register */ #define I2C_CLR_IRQ BIT_0 /* Clear I2C IRQ */ /* B2_I2C_SW 32 bit (8 bit access) I2C HW SW Port Register */ #define I2C_DATA_DIR BIT_2 /* direction of I2C_DATA */ #define I2C_DATA BIT_1 /* I2C Data Port */ #define I2C_CLK BIT_0 /* I2C Clock Port */ /* I2C Address */ #define I2C_SENS_ADDR LM80_ADDR /* I2C Sensor Address (Volt and Temp) */ /* B2_BSC_CTRL 8 bit Blink Source Counter Control */ #define BSC_START BIT_1 /* Start Blink Source Counter */ #define BSC_STOP BIT_0 /* Stop Blink Source Counter */ /* B2_BSC_STAT 8 bit Blink Source Counter Status */ #define BSC_SRC BIT_0 /* Blink Source, 0=Off / 1=On */ /* B2_BSC_TST 16 bit Blink Source Counter Test Reg */ #define BSC_T_ON BIT_2 /* Test mode on */ #define BSC_T_OFF BIT_1 /* Test mode off */ #define BSC_T_STEP BIT_0 /* Test step */ /* Y2_PEX_PHY_ADDR/DATA PEX PHY address and data reg (Yukon-2 only) */ #define PEX_RD_ACCESS BIT_31 /* Access Mode Read = 1, Write = 0 */ #define PEX_DB_ACCESS BIT_30 /* Access to debug register */ /* B3_RAM_ADDR 32 bit RAM Address, to read or write */ #define RAM_ADR_RAN 0x0007ffff /* Bit 18.. 0: RAM Address Range */ /* RAM Interface Registers */ /* B3_RI_CTRL 16 bit RAM Interface Control Register */ #define RI_CLR_RD_PERR BIT_9 /* Clear IRQ RAM Read Parity Err */ #define RI_CLR_WR_PERR BIT_8 /* Clear IRQ RAM Write Parity Err */ #define RI_RST_CLR BIT_1 /* Clear RAM Interface Reset */ #define RI_RST_SET BIT_0 /* Set RAM Interface Reset */ #define MSK_RI_TO_53 36 /* RAM interface timeout */ /* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */ /* TXA_ITI_INI 32 bit Tx Arb Interval Timer Init Val */ /* TXA_ITI_VAL 32 bit Tx Arb Interval Timer Value */ /* TXA_LIM_INI 32 bit Tx Arb Limit Counter Init Val */ /* TXA_LIM_VAL 32 bit Tx Arb Limit Counter Value */ #define TXA_MAX_VAL 0x00ffffff/* Bit 23.. 0: Max TXA Timer/Cnt Val */ /* TXA_CTRL 8 bit Tx Arbiter Control Register */ #define TXA_ENA_FSYNC BIT_7 /* Enable force of sync Tx queue */ #define TXA_DIS_FSYNC BIT_6 /* Disable force of sync Tx queue */ #define TXA_ENA_ALLOC BIT_5 /* Enable alloc of free bandwidth */ #define TXA_DIS_ALLOC BIT_4 /* Disable alloc of free bandwidth */ #define TXA_START_RC BIT_3 /* Start sync Rate Control */ #define TXA_STOP_RC BIT_2 /* Stop sync Rate Control */ #define TXA_ENA_ARB BIT_1 /* Enable Tx Arbiter */ #define TXA_DIS_ARB BIT_0 /* Disable Tx Arbiter */ /* TXA_TEST 8 bit Tx Arbiter Test Register */ #define TXA_INT_T_ON BIT_5 /* Tx Arb Interval Timer Test On */ #define TXA_INT_T_OFF BIT_4 /* Tx Arb Interval Timer Test Off */ #define TXA_INT_T_STEP BIT_3 /* Tx Arb Interval Timer Step */ #define TXA_LIM_T_ON BIT_2 /* Tx Arb Limit Timer Test On */ #define TXA_LIM_T_OFF BIT_1 /* Tx Arb Limit Timer Test Off */ #define TXA_LIM_T_STEP BIT_0 /* Tx Arb Limit Timer Step */ /* TXA_STAT 8 bit Tx Arbiter Status Register */ #define TXA_PRIO_XS BIT_0 /* sync queue has prio to send */ /* Q_BC 32 bit Current Byte Counter */ #define BC_MAX 0xffff /* Bit 15.. 0: Byte counter */ /* Rx BMU Control / Status Registers (Yukon-2) */ #define BMU_IDLE BIT_31 /* BMU Idle State */ #define BMU_RX_TCP_PKT BIT_30 /* Rx TCP Packet (when RSS Hash enabled) */ #define BMU_RX_IP_PKT BIT_29 /* Rx IP Packet (when RSS Hash enabled) */ #define BMU_ENA_RX_RSS_HASH BIT_15 /* Enable Rx RSS Hash */ #define BMU_DIS_RX_RSS_HASH BIT_14 /* Disable Rx RSS Hash */ #define BMU_ENA_RX_CHKSUM BIT_13 /* Enable Rx TCP/IP Checksum Check */ #define BMU_DIS_RX_CHKSUM BIT_12 /* Disable Rx TCP/IP Checksum Check */ #define BMU_CLR_IRQ_PAR BIT_11 /* Clear IRQ on Parity errors (Rx) */ #define BMU_CLR_IRQ_TCP BIT_11 /* Clear IRQ on TCP segmen. error (Tx) */ #define BMU_CLR_IRQ_CHK BIT_10 /* Clear IRQ Check */ #define BMU_STOP BIT_9 /* Stop Rx/Tx Queue */ #define BMU_START BIT_8 /* Start Rx/Tx Queue */ #define BMU_FIFO_OP_ON BIT_7 /* FIFO Operational On */ #define BMU_FIFO_OP_OFF BIT_6 /* FIFO Operational Off */ #define BMU_FIFO_ENA BIT_5 /* Enable FIFO */ #define BMU_FIFO_RST BIT_4 /* Reset FIFO */ #define BMU_OP_ON BIT_3 /* BMU Operational On */ #define BMU_OP_OFF BIT_2 /* BMU Operational Off */ #define BMU_RST_CLR BIT_1 /* Clear BMU Reset (Enable) */ #define BMU_RST_SET BIT_0 /* Set BMU Reset */ #define BMU_CLR_RESET (BMU_FIFO_RST | BMU_OP_OFF | BMU_RST_CLR) #define BMU_OPER_INIT (BMU_CLR_IRQ_PAR | BMU_CLR_IRQ_CHK | \ BMU_START | BMU_FIFO_ENA | BMU_OP_ON) /* Tx BMU Control / Status Registers (Yukon-2) */ /* Bit 31: same as for Rx */ #define BMU_TX_IPIDINCR_ON BIT_13 /* Enable IP ID Increment */ #define BMU_TX_IPIDINCR_OFF BIT_12 /* Disable IP ID Increment */ #define BMU_TX_CLR_IRQ_TCP BIT_11 /* Clear IRQ on TCP segm. length mism. */ /* Bit 10..0: same as for Rx */ /* Q_F 32 bit Flag Register */ #define F_TX_CHK_AUTO_OFF BIT_31 /* Tx checksum auto-calc Off(Yukon EX)*/ #define F_TX_CHK_AUTO_ON BIT_30 /* Tx checksum auto-calc On(Yukon EX)*/ #define F_ALM_FULL BIT_28 /* Rx FIFO: almost full */ #define F_EMPTY BIT_27 /* Tx FIFO: empty flag */ #define F_FIFO_EOF BIT_26 /* Tag (EOF Flag) bit in FIFO */ #define F_WM_REACHED BIT_25 /* Watermark reached */ #define F_M_RX_RAM_DIS BIT_24 /* MAC Rx RAM Read Port disable */ #define F_FIFO_LEVEL (0x1f<<16) /* Bit 23..16: # of Qwords in FIFO */ #define F_WATER_MARK 0x0007ff/* Bit 10.. 0: Watermark */ /* Queue Prefetch Unit Offsets, use Y2_PREF_Q_ADDR() to address (Yukon-2 only)*/ /* PREF_UNIT_CTRL_REG 32 bit Prefetch Control register */ #define PREF_UNIT_OP_ON BIT_3 /* prefetch unit operational */ #define PREF_UNIT_OP_OFF BIT_2 /* prefetch unit not operational */ #define PREF_UNIT_RST_CLR BIT_1 /* Clear Prefetch Unit Reset */ #define PREF_UNIT_RST_SET BIT_0 /* Set Prefetch Unit Reset */ /* RAM Buffer Register Offsets, use RB_ADDR(Queue, Offs) to access */ /* RB_START 32 bit RAM Buffer Start Address */ /* RB_END 32 bit RAM Buffer End Address */ /* RB_WP 32 bit RAM Buffer Write Pointer */ /* RB_RP 32 bit RAM Buffer Read Pointer */ /* RB_RX_UTPP 32 bit Rx Upper Threshold, Pause Pack */ /* RB_RX_LTPP 32 bit Rx Lower Threshold, Pause Pack */ /* RB_RX_UTHP 32 bit Rx Upper Threshold, High Prio */ /* RB_RX_LTHP 32 bit Rx Lower Threshold, High Prio */ /* RB_PC 32 bit RAM Buffer Packet Counter */ /* RB_LEV 32 bit RAM Buffer Level Register */ #define RB_MSK 0x0007ffff /* Bit 18.. 0: RAM Buffer Pointer Bits */ /* RB_TST2 8 bit RAM Buffer Test Register 2 */ #define RB_PC_DEC BIT_3 /* Packet Counter Decrement */ #define RB_PC_T_ON BIT_2 /* Packet Counter Test On */ #define RB_PC_T_OFF BIT_1 /* Packet Counter Test Off */ #define RB_PC_INC BIT_0 /* Packet Counter Increment */ /* RB_TST1 8 bit RAM Buffer Test Register 1 */ #define RB_WP_T_ON BIT_6 /* Write Pointer Test On */ #define RB_WP_T_OFF BIT_5 /* Write Pointer Test Off */ #define RB_WP_INC BIT_4 /* Write Pointer Increment */ #define RB_RP_T_ON BIT_2 /* Read Pointer Test On */ #define RB_RP_T_OFF BIT_1 /* Read Pointer Test Off */ #define RB_RP_INC BIT_0 /* Read Pointer Increment */ /* RB_CTRL 8 bit RAM Buffer Control Register */ #define RB_ENA_STFWD BIT_5 /* Enable Store & Forward */ #define RB_DIS_STFWD BIT_4 /* Disable Store & Forward */ #define RB_ENA_OP_MD BIT_3 /* Enable Operation Mode */ #define RB_DIS_OP_MD BIT_2 /* Disable Operation Mode */ #define RB_RST_CLR BIT_1 /* Clear RAM Buf STM Reset */ #define RB_RST_SET BIT_0 /* Set RAM Buf STM Reset */ /* RAM Buffer High Pause Threshold values */ #define MSK_RB_ULPP (8 * 1024) /* Upper Level in kB/8 */ #define MSK_RB_LLPP_S (10 * 1024) /* Lower Level for small Queues */ #define MSK_RB_LLPP_B (16 * 1024) /* Lower Level for big Queues */ /* Threshold values for Yukon-EC Ultra */ #define MSK_ECU_ULPP 0x0080 /* Upper Pause Threshold (multiples of 8) */ #define MSK_ECU_LLPP 0x0060 /* Lower Pause Threshold (multiples of 8) */ #define MSK_ECU_AE_THR 0x0070 /* Almost Empty Threshold */ #define MSK_ECU_TXFF_LEV 0x01a0 /* Tx BMU FIFO Level */ #define MSK_ECU_JUMBO_WM 0x01 #define MSK_BMU_RX_WM 0x600 /* BMU Rx Watermark */ #define MSK_BMU_TX_WM 0x600 /* BMU Tx Watermark */ /* performance sensitive drivers should set this define to 0x80 */ #define MSK_BMU_RX_WM_PEX 0x600 /* BMU Rx Watermark for PEX */ /* Receive and Transmit Queues */ #define Q_R1 0x0000 /* Receive Queue 1 */ #define Q_R2 0x0080 /* Receive Queue 2 */ #define Q_XS1 0x0200 /* Synchronous Transmit Queue 1 */ #define Q_XA1 0x0280 /* Asynchronous Transmit Queue 1 */ #define Q_XS2 0x0300 /* Synchronous Transmit Queue 2 */ #define Q_XA2 0x0380 /* Asynchronous Transmit Queue 2 */ #define Q_ASF_R1 0x100 /* ASF Rx Queue 1 */ #define Q_ASF_R2 0x180 /* ASF Rx Queue 2 */ #define Q_ASF_T1 0x140 /* ASF Tx Queue 1 */ #define Q_ASF_T2 0x1c0 /* ASF Tx Queue 2 */ #define RB_ADDR(Queue, Offs) (B16_RAM_REGS + (Queue) + (Offs)) /* Minimum RAM Buffer Rx Queue Size */ #define MSK_MIN_RXQ_SIZE 10 /* Minimum RAM Buffer Tx Queue Size */ #define MSK_MIN_TXQ_SIZE 10 /* Percentage of queue size from whole memory. 80 % for receive */ #define MSK_RAM_QUOTA_RX 80 /* WOL_CTRL_STAT 16 bit WOL Control/Status Reg */ #define WOL_CTL_LINK_CHG_OCC BIT_15 #define WOL_CTL_MAGIC_PKT_OCC BIT_14 #define WOL_CTL_PATTERN_OCC BIT_13 #define WOL_CTL_CLEAR_RESULT BIT_12 #define WOL_CTL_ENA_PME_ON_LINK_CHG BIT_11 #define WOL_CTL_DIS_PME_ON_LINK_CHG BIT_10 #define WOL_CTL_ENA_PME_ON_MAGIC_PKT BIT_9 #define WOL_CTL_DIS_PME_ON_MAGIC_PKT BIT_8 #define WOL_CTL_ENA_PME_ON_PATTERN BIT_7 #define WOL_CTL_DIS_PME_ON_PATTERN BIT_6 #define WOL_CTL_ENA_LINK_CHG_UNIT BIT_5 #define WOL_CTL_DIS_LINK_CHG_UNIT BIT_4 #define WOL_CTL_ENA_MAGIC_PKT_UNIT BIT_3 #define WOL_CTL_DIS_MAGIC_PKT_UNIT BIT_2 #define WOL_CTL_ENA_PATTERN_UNIT BIT_1 #define WOL_CTL_DIS_PATTERN_UNIT BIT_0 #define WOL_CTL_DEFAULT \ (WOL_CTL_DIS_PME_ON_LINK_CHG | \ WOL_CTL_DIS_PME_ON_PATTERN | \ WOL_CTL_DIS_PME_ON_MAGIC_PKT | \ WOL_CTL_DIS_LINK_CHG_UNIT | \ WOL_CTL_DIS_PATTERN_UNIT | \ WOL_CTL_DIS_MAGIC_PKT_UNIT) /* WOL_MATCH_CTL 8 bit WOL Match Control Reg */ #define WOL_CTL_PATT_ENA(x) (BIT_0 << (x)) /* WOL_PATT_PME 8 bit WOL PME Match Enable (Yukon-2) */ #define WOL_PATT_FORCE_PME BIT_7 /* Generates a PME */ #define WOL_PATT_MATCH_PME_ALL 0x7f /* * Marvel-PHY Registers, indirect addressed over GMAC */ #define PHY_MARV_CTRL 0x00 /* 16 bit r/w PHY Control Register */ #define PHY_MARV_STAT 0x01 /* 16 bit r/o PHY Status Register */ #define PHY_MARV_ID0 0x02 /* 16 bit r/o PHY ID0 Register */ #define PHY_MARV_ID1 0x03 /* 16 bit r/o PHY ID1 Register */ #define PHY_MARV_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */ #define PHY_MARV_AUNE_LP 0x05 /* 16 bit r/o Link Part Ability Reg */ #define PHY_MARV_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */ #define PHY_MARV_NEPG 0x07 /* 16 bit r/w Next Page Register */ #define PHY_MARV_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner */ /* Marvel-specific registers */ #define PHY_MARV_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Control Reg */ #define PHY_MARV_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */ /* 0x0b - 0x0e: reserved */ #define PHY_MARV_EXT_STAT 0x0f /* 16 bit r/o Extended Status Reg */ #define PHY_MARV_PHY_CTRL 0x10 /* 16 bit r/w PHY Specific Control Reg */ #define PHY_MARV_PHY_STAT 0x11 /* 16 bit r/o PHY Specific Status Reg */ #define PHY_MARV_INT_MASK 0x12 /* 16 bit r/w Interrupt Mask Reg */ #define PHY_MARV_INT_STAT 0x13 /* 16 bit r/o Interrupt Status Reg */ #define PHY_MARV_EXT_CTRL 0x14 /* 16 bit r/w Ext. PHY Specific Ctrl */ #define PHY_MARV_RXE_CNT 0x15 /* 16 bit r/w Receive Error Counter */ #define PHY_MARV_EXT_ADR 0x16 /* 16 bit r/w Ext. Ad. for Cable Diag. */ #define PHY_MARV_PORT_IRQ 0x17 /* 16 bit r/o Port 0 IRQ (88E1111 only) */ #define PHY_MARV_LED_CTRL 0x18 /* 16 bit r/w LED Control Reg */ #define PHY_MARV_LED_OVER 0x19 /* 16 bit r/w Manual LED Override Reg */ #define PHY_MARV_EXT_CTRL_2 0x1a /* 16 bit r/w Ext. PHY Specific Ctrl 2 */ #define PHY_MARV_EXT_P_STAT 0x1b /* 16 bit r/w Ext. PHY Spec. Stat Reg */ #define PHY_MARV_CABLE_DIAG 0x1c /* 16 bit r/o Cable Diagnostic Reg */ #define PHY_MARV_PAGE_ADDR 0x1d /* 16 bit r/w Extended Page Address Reg */ #define PHY_MARV_PAGE_DATA 0x1e /* 16 bit r/w Extended Page Data Reg */ /* for 10/100 Fast Ethernet PHY (88E3082 only) */ #define PHY_MARV_FE_LED_PAR 0x16 /* 16 bit r/w LED Parallel Select Reg. */ #define PHY_MARV_FE_LED_SER 0x17 /* 16 bit r/w LED Stream Select S. LED */ #define PHY_MARV_FE_VCT_TX 0x1a /* 16 bit r/w VCT Reg. for TXP/N Pins */ #define PHY_MARV_FE_VCT_RX 0x1b /* 16 bit r/o VCT Reg. for RXP/N Pins */ #define PHY_MARV_FE_SPEC_2 0x1c /* 16 bit r/w Specific Control Reg. 2 */ #define PHY_CT_RESET (1<<15) /* Bit 15: (sc) clear all PHY related regs */ #define PHY_CT_LOOP (1<<14) /* Bit 14: enable Loopback over PHY */ #define PHY_CT_SPS_LSB (1<<13) /* Bit 13: Speed select, lower bit */ #define PHY_CT_ANE (1<<12) /* Bit 12: Auto-Negotiation Enabled */ #define PHY_CT_PDOWN (1<<11) /* Bit 11: Power Down Mode */ #define PHY_CT_ISOL (1<<10) /* Bit 10: Isolate Mode */ #define PHY_CT_RE_CFG (1<<9) /* Bit 9: (sc) Restart Auto-Negotiation */ #define PHY_CT_DUP_MD (1<<8) /* Bit 8: Duplex Mode */ #define PHY_CT_COL_TST (1<<7) /* Bit 7: Collision Test enabled */ #define PHY_CT_SPS_MSB (1<<6) /* Bit 6: Speed select, upper bit */ #define PHY_CT_SP1000 PHY_CT_SPS_MSB /* enable speed of 1000 Mbps */ #define PHY_CT_SP100 PHY_CT_SPS_LSB /* enable speed of 100 Mbps */ #define PHY_CT_SP10 (0) /* enable speed of 10 Mbps */ #define PHY_ST_EXT_ST (1<<8) /* Bit 8: Extended Status Present */ #define PHY_ST_PRE_SUP (1<<6) /* Bit 6: Preamble Suppression */ #define PHY_ST_AN_OVER (1<<5) /* Bit 5: Auto-Negotiation Over */ #define PHY_ST_REM_FLT (1<<4) /* Bit 4: Remote Fault Condition Occured */ #define PHY_ST_AN_CAP (1<<3) /* Bit 3: Auto-Negotiation Capability */ #define PHY_ST_LSYNC (1<<2) /* Bit 2: Link Synchronized */ #define PHY_ST_JAB_DET (1<<1) /* Bit 1: Jabber Detected */ #define PHY_ST_EXT_REG (1<<0) /* Bit 0: Extended Register available */ #define PHY_I1_OUI_MSK (0x3f<<10) /* Bit 15..10: Organization Unique ID */ #define PHY_I1_MOD_NUM (0x3f<<4) /* Bit 9.. 4: Model Number */ #define PHY_I1_REV_MSK 0xf /* Bit 3.. 0: Revision Number */ /* different Marvell PHY Ids */ #define PHY_MARV_ID0_VAL 0x0141 /* Marvell Unique Identifier */ #define PHY_MARV_ID1_B0 0x0C23 /* Yukon (PHY 88E1011) */ #define PHY_MARV_ID1_B2 0x0C25 /* Yukon-Plus (PHY 88E1011) */ #define PHY_MARV_ID1_C2 0x0CC2 /* Yukon-EC (PHY 88E1111) */ #define PHY_MARV_ID1_Y2 0x0C91 /* Yukon-2 (PHY 88E1112) */ #define PHY_MARV_ID1_FE 0x0C83 /* Yukon-FE (PHY 88E3082 Rev.A1) */ #define PHY_MARV_ID1_ECU 0x0CB0 /* Yukon-2 (PHY 88E1149 Rev.B2?) */ /***** PHY_MARV_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ #define PHY_B_1000S_MSF (1<<15) /* Bit 15: Master/Slave Fault */ #define PHY_B_1000S_MSR (1<<14) /* Bit 14: Master/Slave Result */ #define PHY_B_1000S_LRS (1<<13) /* Bit 13: Local Receiver Status */ #define PHY_B_1000S_RRS (1<<12) /* Bit 12: Remote Receiver Status */ #define PHY_B_1000S_LP_FD (1<<11) /* Bit 11: Link Partner can FD */ #define PHY_B_1000S_LP_HD (1<<10) /* Bit 10: Link Partner can HD */ #define PHY_B_1000S_IEC 0xff /* Bit 7..0: Idle Error Count */ /***** PHY_MARV_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/ /***** PHY_MARV_AUNE_LP 16 bit r/w Link Part Ability Reg *****/ #define PHY_M_AN_NXT_PG BIT_15 /* Request Next Page */ #define PHY_M_AN_ACK BIT_14 /* (ro) Acknowledge Received */ #define PHY_M_AN_RF BIT_13 /* Remote Fault */ #define PHY_M_AN_ASP BIT_11 /* Asymmetric Pause */ #define PHY_M_AN_PC BIT_10 /* MAC Pause implemented */ #define PHY_M_AN_100_T4 BIT_9 /* Not cap. 100Base-T4 (always 0) */ #define PHY_M_AN_100_FD BIT_8 /* Advertise 100Base-TX Full Duplex */ #define PHY_M_AN_100_HD BIT_7 /* Advertise 100Base-TX Half Duplex */ #define PHY_M_AN_10_FD BIT_6 /* Advertise 10Base-T Full Duplex */ #define PHY_M_AN_10_HD BIT_5 /* Advertise 10Base-T Half Duplex */ #define PHY_M_AN_SEL_MSK (0x1f<<4) /* Bit 4.. 0: Selector Field Mask */ /* special defines for FIBER (88E1011S only) */ #define PHY_M_AN_ASP_X BIT_8 /* Asymmetric Pause */ #define PHY_M_AN_PC_X BIT_7 /* MAC Pause implemented */ #define PHY_M_AN_1000X_AHD BIT_6 /* Advertise 10000Base-X Half Duplex */ #define PHY_M_AN_1000X_AFD BIT_5 /* Advertise 10000Base-X Full Duplex */ /* Pause Bits (PHY_M_AN_ASP_X and PHY_M_AN_PC_X) encoding */ #define PHY_M_P_NO_PAUSE_X (0<<7) /* Bit 8.. 7: no Pause Mode */ #define PHY_M_P_SYM_MD_X (1<<7) /* Bit 8.. 7: symmetric Pause Mode */ #define PHY_M_P_ASYM_MD_X (2<<7) /* Bit 8.. 7: asymmetric Pause Mode */ #define PHY_M_P_BOTH_MD_X (3<<7) /* Bit 8.. 7: both Pause Mode */ /***** PHY_MARV_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ #define PHY_M_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */ #define PHY_M_1000C_MSE BIT_12 /* Manual Master/Slave Enable */ #define PHY_M_1000C_MSC BIT_11 /* M/S Configuration (1=Master) */ #define PHY_M_1000C_MPD BIT_10 /* Multi-Port Device */ #define PHY_M_1000C_AFD BIT_9 /* Advertise Full Duplex */ #define PHY_M_1000C_AHD BIT_8 /* Advertise Half Duplex */ /***** PHY_MARV_PHY_CTRL 16 bit r/w PHY Specific Ctrl Reg *****/ #define PHY_M_PC_TX_FFD_MSK (3<<14) /* Bit 15..14: Tx FIFO Depth Mask */ #define PHY_M_PC_RX_FFD_MSK (3<<12) /* Bit 13..12: Rx FIFO Depth Mask */ #define PHY_M_PC_ASS_CRS_TX BIT_11 /* Assert CRS on Transmit */ #define PHY_M_PC_FL_GOOD BIT_10 /* Force Link Good */ #define PHY_M_PC_EN_DET_MSK (3<<8) /* Bit 9.. 8: Energy Detect Mask */ #define PHY_M_PC_ENA_EXT_D BIT_7 /* Enable Ext. Distance (10BT) */ #define PHY_M_PC_MDIX_MSK (3<<5) /* Bit 6.. 5: MDI/MDIX Config. Mask */ #define PHY_M_PC_DIS_125CLK BIT_4 /* Disable 125 CLK */ #define PHY_M_PC_MAC_POW_UP BIT_3 /* MAC Power up */ #define PHY_M_PC_SQE_T_ENA BIT_2 /* SQE Test Enabled */ #define PHY_M_PC_POL_R_DIS BIT_1 /* Polarity Reversal Disabled */ #define PHY_M_PC_DIS_JABBER BIT_0 /* Disable Jabber */ #define PHY_M_PC_EN_DET SHIFT8(2) /* Energy Detect (Mode 1) */ #define PHY_M_PC_EN_DET_PLUS SHIFT8(3) /* Energy Detect Plus (Mode 2) */ #define PHY_M_PC_MDI_XMODE(x) (SHIFT5(x) & PHY_M_PC_MDIX_MSK) #define PHY_M_PC_MAN_MDI 0 /* 00 = Manual MDI configuration */ #define PHY_M_PC_MAN_MDIX 1 /* 01 = Manual MDIX configuration */ #define PHY_M_PC_ENA_AUTO 3 /* 11 = Enable Automatic Crossover */ /* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */ #define PHY_M_PC_DIS_LINK_P BIT_15 /* Disable Link Pulses */ #define PHY_M_PC_DSC_MSK (7<<12) /* Bit 14..12: Downshift Counter */ #define PHY_M_PC_DOWN_S_ENA BIT_11 /* Downshift Enable */ /* !!! Errata in spec. (1 = disable) */ #define PHY_M_PC_DSC(x) (SHIFT12(x) & PHY_M_PC_DSC_MSK) /* 000=1x; 001=2x; 010=3x; 011=4x */ /* 100=5x; 101=6x; 110=7x; 111=8x */ /* for 10/100 Fast Ethernet PHY (88E3082 only) */ #define PHY_M_PC_ENA_DTE_DT BIT_15 /* Enable Data Terminal Equ. (DTE) Detect */ #define PHY_M_PC_ENA_ENE_DT BIT_14 /* Enable Energy Detect (sense & pulse) */ #define PHY_M_PC_DIS_NLP_CK BIT_13 /* Disable Normal Link Puls (NLP) Check */ #define PHY_M_PC_ENA_LIP_NP BIT_12 /* Enable Link Partner Next Page Reg. */ #define PHY_M_PC_DIS_NLP_GN BIT_11 /* Disable Normal Link Puls Generation */ #define PHY_M_PC_DIS_SCRAMB BIT_9 /* Disable Scrambler */ #define PHY_M_PC_DIS_FEFI BIT_8 /* Disable Far End Fault Indic. (FEFI) */ #define PHY_M_PC_SH_TP_SEL BIT_6 /* Shielded Twisted Pair Select */ #define PHY_M_PC_RX_FD_MSK (3<<2) /* Bit 3.. 2: Rx FIFO Depth Mask */ /***** PHY_MARV_PHY_STAT 16 bit r/o PHY Specific Status Reg *****/ #define PHY_M_PS_SPEED_MSK (3<<14) /* Bit 15..14: Speed Mask */ #define PHY_M_PS_SPEED_1000 BIT_15 /* 10 = 1000 Mbps */ #define PHY_M_PS_SPEED_100 BIT_14 /* 01 = 100 Mbps */ #define PHY_M_PS_SPEED_10 0 /* 00 = 10 Mbps */ #define PHY_M_PS_FULL_DUP BIT_13 /* Full Duplex */ #define PHY_M_PS_PAGE_REC BIT_12 /* Page Received */ #define PHY_M_PS_SPDUP_RES BIT_11 /* Speed & Duplex Resolved */ #define PHY_M_PS_LINK_UP BIT_10 /* Link Up */ #define PHY_M_PS_CABLE_MSK (7<<7) /* Bit 9.. 7: Cable Length Mask */ #define PHY_M_PS_MDI_X_STAT BIT_6 /* MDI Crossover Stat (1=MDIX) */ #define PHY_M_PS_DOWNS_STAT BIT_5 /* Downshift Status (1=downsh.) */ #define PHY_M_PS_ENDET_STAT BIT_4 /* Energy Detect Status (1=act) */ #define PHY_M_PS_TX_P_EN BIT_3 /* Tx Pause Enabled */ #define PHY_M_PS_RX_P_EN BIT_2 /* Rx Pause Enabled */ #define PHY_M_PS_POL_REV BIT_1 /* Polarity Reversed */ #define PHY_M_PS_JABBER BIT_0 /* Jabber */ #define PHY_M_PS_PAUSE_MSK (PHY_M_PS_TX_P_EN | PHY_M_PS_RX_P_EN) /* for 10/100 Fast Ethernet PHY (88E3082 only) */ #define PHY_M_PS_DTE_DETECT BIT_15 /* Data Terminal Equipment (DTE) Detected */ #define PHY_M_PS_RES_SPEED BIT_14 /* Resolved Speed (1=100 Mbps, 0=10 Mbps */ /***** PHY_MARV_INT_MASK 16 bit r/w Interrupt Mask Reg *****/ /***** PHY_MARV_INT_STAT 16 bit r/o Interrupt Status Reg *****/ #define PHY_M_IS_AN_ERROR BIT_15 /* Auto-Negotiation Error */ #define PHY_M_IS_LSP_CHANGE BIT_14 /* Link Speed Changed */ #define PHY_M_IS_DUP_CHANGE BIT_13 /* Duplex Mode Changed */ #define PHY_M_IS_AN_PR BIT_12 /* Page Received */ #define PHY_M_IS_AN_COMPL BIT_11 /* Auto-Negotiation Completed */ #define PHY_M_IS_LST_CHANGE BIT_10 /* Link Status Changed */ #define PHY_M_IS_SYMB_ERROR BIT_9 /* Symbol Error */ #define PHY_M_IS_FALSE_CARR BIT_8 /* False Carrier */ #define PHY_M_IS_FIFO_ERROR BIT_7 /* FIFO Overflow/Underrun Error */ #define PHY_M_IS_MDI_CHANGE BIT_6 /* MDI Crossover Changed */ #define PHY_M_IS_DOWNSH_DET BIT_5 /* Downshift Detected */ #define PHY_M_IS_END_CHANGE BIT_4 /* Energy Detect Changed */ #define PHY_M_IS_DTE_CHANGE BIT_2 /* DTE Power Det. Status Changed */ #define PHY_M_IS_POL_CHANGE BIT_1 /* Polarity Changed */ #define PHY_M_IS_JABBER BIT_0 /* Jabber */ #define PHY_M_DEF_MSK (PHY_M_IS_AN_ERROR | PHY_M_IS_AN_PR | \ PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR) /***** PHY_MARV_EXT_CTRL 16 bit r/w Ext. PHY Specific Ctrl *****/ #define PHY_M_EC_ENA_BC_EXT BIT_15 /* Enable Block Carr. Ext. (88E1111 only) */ #define PHY_M_EC_ENA_LIN_LB BIT_14 /* Enable Line Loopback (88E1111 only) */ #define PHY_M_EC_DIS_LINK_P BIT_12 /* Disable Link Pulses (88E1111 only) */ #define PHY_M_EC_M_DSC_MSK (3<<10) /* Bit 11..10: Master Downshift Counter */ /* (88E1011 only) */ #define PHY_M_EC_S_DSC_MSK (3<<8) /* Bit 9.. 8: Slave Downshift Counter */ /* (88E1011 only) */ #define PHY_M_EC_DSC_MSK_2 (7<<9) /* Bit 11.. 9: Downshift Counter */ /* (88E1111 only) */ #define PHY_M_EC_DOWN_S_ENA BIT_8 /* Downshift Enable (88E1111 only) */ /* !!! Errata in spec. (1 = disable) */ #define PHY_M_EC_RX_TIM_CT BIT_7 /* RGMII Rx Timing Control*/ #define PHY_M_EC_MAC_S_MSK (7<<4) /* Bit 6.. 4: Def. MAC interface speed */ #define PHY_M_EC_FIB_AN_ENA BIT_3 /* Fiber Auto-Neg. Enable (88E1011S only) */ #define PHY_M_EC_DTE_D_ENA BIT_2 /* DTE Detect Enable (88E1111 only) */ #define PHY_M_EC_TX_TIM_CT BIT_1 /* RGMII Tx Timing Control */ #define PHY_M_EC_TRANS_DIS BIT_0 /* Transmitter Disable (88E1111 only) */ #define PHY_M_EC_M_DSC(x) (SHIFT10(x) & PHY_M_EC_M_DSC_MSK) /* 00=1x; 01=2x; 10=3x; 11=4x */ #define PHY_M_EC_S_DSC(x) (SHIFT8(x) & PHY_M_EC_S_DSC_MSK) /* 00=dis; 01=1x; 10=2x; 11=3x */ #define PHY_M_EC_MAC_S(x) (SHIFT4(x) & PHY_M_EC_MAC_S_MSK) /* 01X=0; 110=2.5; 111=25 (MHz) */ #define PHY_M_EC_DSC_2(x) (SHIFT9(x) & PHY_M_EC_DSC_MSK_2) /* 000=1x; 001=2x; 010=3x; 011=4x */ /* 100=5x; 101=6x; 110=7x; 111=8x */ #define MAC_TX_CLK_0_MHZ 2 #define MAC_TX_CLK_2_5_MHZ 6 #define MAC_TX_CLK_25_MHZ 7 /***** PHY_MARV_LED_CTRL 16 bit r/w LED Control Reg *****/ #define PHY_M_LEDC_DIS_LED BIT_15 /* Disable LED */ #define PHY_M_LEDC_PULS_MSK (7<<12) /* Bit 14..12: Pulse Stretch Mask */ #define PHY_M_LEDC_F_INT BIT_11 /* Force Interrupt */ #define PHY_M_LEDC_BL_R_MSK (7<<8) /* Bit 10.. 8: Blink Rate Mask */ #define PHY_M_LEDC_DP_C_LSB BIT_7 /* Duplex Control (LSB, 88E1111 only) */ #define PHY_M_LEDC_TX_C_LSB BIT_6 /* Tx Control (LSB, 88E1111 only) */ #define PHY_M_LEDC_LK_C_MSK (7<<3) /* Bit 5.. 3: Link Control Mask */ /* (88E1111 only) */ #define PHY_M_LEDC_LINK_MSK (3<<3) /* Bit 4.. 3: Link Control Mask */ /* (88E1011 only) */ #define PHY_M_LEDC_DP_CTRL BIT_2 /* Duplex Control */ #define PHY_M_LEDC_DP_C_MSB BIT_2 /* Duplex Control (MSB, 88E1111 only) */ #define PHY_M_LEDC_RX_CTRL BIT_1 /* Rx Activity / Link */ #define PHY_M_LEDC_TX_CTRL BIT_0 /* Tx Activity / Link */ #define PHY_M_LEDC_TX_C_MSB BIT_0 /* Tx Control (MSB, 88E1111 only) */ #define PHY_M_LED_PULS_DUR(x) (SHIFT12(x) & PHY_M_LEDC_PULS_MSK) #define PULS_NO_STR 0 /* no pulse stretching */ #define PULS_21MS 1 /* 21 ms to 42 ms */ #define PULS_42MS 2 /* 42 ms to 84 ms */ #define PULS_84MS 3 /* 84 ms to 170 ms */ #define PULS_170MS 4 /* 170 ms to 340 ms */ #define PULS_340MS 5 /* 340 ms to 670 ms */ #define PULS_670MS 6 /* 670 ms to 1.3 s */ #define PULS_1300MS 7 /* 1.3 s to 2.7 s */ #define PHY_M_LED_BLINK_RT(x) (SHIFT8(x) & PHY_M_LEDC_BL_R_MSK) #define BLINK_42MS 0 /* 42 ms */ #define BLINK_84MS 1 /* 84 ms */ #define BLINK_170MS 2 /* 170 ms */ #define BLINK_340MS 3 /* 340 ms */ #define BLINK_670MS 4 /* 670 ms */ /***** PHY_MARV_LED_OVER 16 bit r/w Manual LED Override Reg *****/ #define PHY_M_LED_MO_SGMII(x) SHIFT14(x) /* Bit 15..14: SGMII AN Timer */ #define PHY_M_LED_MO_DUP(x) SHIFT10(x) /* Bit 11..10: Duplex */ #define PHY_M_LED_MO_10(x) SHIFT8(x) /* Bit 9.. 8: Link 10 */ #define PHY_M_LED_MO_100(x) SHIFT6(x) /* Bit 7.. 6: Link 100 */ #define PHY_M_LED_MO_1000(x) SHIFT4(x) /* Bit 5.. 4: Link 1000 */ #define PHY_M_LED_MO_RX(x) SHIFT2(x) /* Bit 3.. 2: Rx */ #define PHY_M_LED_MO_TX(x) SHIFT0(x) /* Bit 1.. 0: Tx */ #define MO_LED_NORM 0 #define MO_LED_BLINK 1 #define MO_LED_OFF 2 #define MO_LED_ON 3 /***** PHY_MARV_EXT_CTRL_2 16 bit r/w Ext. PHY Specific Ctrl 2 *****/ #define PHY_M_EC2_FI_IMPED BIT_6 /* Fiber Input Impedance */ #define PHY_M_EC2_FO_IMPED BIT_5 /* Fiber Output Impedance */ #define PHY_M_EC2_FO_M_CLK BIT_4 /* Fiber Mode Clock Enable */ #define PHY_M_EC2_FO_BOOST BIT_3 /* Fiber Output Boost */ #define PHY_M_EC2_FO_AM_MSK 7 /* Bit 2.. 0: Fiber Output Amplitude */ /***** PHY_MARV_EXT_P_STAT 16 bit r/w Ext. PHY Specific Status *****/ #define PHY_M_FC_AUTO_SEL BIT_15 /* Fiber/Copper Auto Sel. Dis. */ #define PHY_M_FC_AN_REG_ACC BIT_14 /* Fiber/Copper AN Reg. Access */ #define PHY_M_FC_RESOLUTION BIT_13 /* Fiber/Copper Resolution */ #define PHY_M_SER_IF_AN_BP BIT_12 /* Ser. IF AN Bypass Enable */ #define PHY_M_SER_IF_BP_ST BIT_11 /* Ser. IF AN Bypass Status */ #define PHY_M_IRQ_POLARITY BIT_10 /* IRQ polarity */ #define PHY_M_DIS_AUT_MED BIT_9 /* Disable Aut. Medium Reg. Selection */ /* (88E1111 only) */ #define PHY_M_UNDOC1 BIT_7 /* undocumented bit !! */ #define PHY_M_DTE_POW_STAT BIT_4 /* DTE Power Status (88E1111 only) */ #define PHY_M_MODE_MASK 0xf /* Bit 3.. 0: copy of HWCFG MODE[3:0] */ /***** PHY_MARV_CABLE_DIAG 16 bit r/o Cable Diagnostic Reg *****/ #define PHY_M_CABD_ENA_TEST BIT_15 /* Enable Test (Page 0) */ #define PHY_M_CABD_DIS_WAIT BIT_15 /* Disable Waiting Period (Page 1) */ /* (88E1111 only) */ #define PHY_M_CABD_STAT_MSK (3<<13) /* Bit 14..13: Status Mask */ #define PHY_M_CABD_AMPL_MSK (0x1f<<8) /* Bit 12.. 8: Amplitude Mask */ /* (88E1111 only) */ #define PHY_M_CABD_DIST_MSK 0xff /* Bit 7.. 0: Distance Mask */ /* values for Cable Diagnostic Status (11=fail; 00=OK; 10=open; 01=short) */ #define CABD_STAT_NORMAL 0 #define CABD_STAT_SHORT 1 #define CABD_STAT_OPEN 2 #define CABD_STAT_FAIL 3 /* for 10/100 Fast Ethernet PHY (88E3082 only) */ /***** PHY_MARV_FE_LED_PAR 16 bit r/w LED Parallel Select Reg. *****/ #define PHY_M_FELP_LED2_MSK (0xf<<8) /* Bit 11.. 8: LED2 Mask (LINK) */ #define PHY_M_FELP_LED1_MSK (0xf<<4) /* Bit 7.. 4: LED1 Mask (ACT) */ #define PHY_M_FELP_LED0_MSK 0xf /* Bit 3.. 0: LED0 Mask (SPEED) */ #define PHY_M_FELP_LED2_CTRL(x) (SHIFT8(x) & PHY_M_FELP_LED2_MSK) #define PHY_M_FELP_LED1_CTRL(x) (SHIFT4(x) & PHY_M_FELP_LED1_MSK) #define PHY_M_FELP_LED0_CTRL(x) (SHIFT0(x) & PHY_M_FELP_LED0_MSK) #define LED_PAR_CTRL_COLX 0x00 #define LED_PAR_CTRL_ERROR 0x01 #define LED_PAR_CTRL_DUPLEX 0x02 #define LED_PAR_CTRL_DP_COL 0x03 #define LED_PAR_CTRL_SPEED 0x04 #define LED_PAR_CTRL_LINK 0x05 #define LED_PAR_CTRL_TX 0x06 #define LED_PAR_CTRL_RX 0x07 #define LED_PAR_CTRL_ACT 0x08 #define LED_PAR_CTRL_LNK_RX 0x09 #define LED_PAR_CTRL_LNK_AC 0x0a #define LED_PAR_CTRL_ACT_BL 0x0b #define LED_PAR_CTRL_TX_BL 0x0c #define LED_PAR_CTRL_RX_BL 0x0d #define LED_PAR_CTRL_COL_BL 0x0e #define LED_PAR_CTRL_INACT 0x0f /***** PHY_MARV_FE_SPEC_2 16 bit r/w Specific Control Reg. 2 *****/ #define PHY_M_FESC_DIS_WAIT BIT_2 /* Disable TDR Waiting Period */ #define PHY_M_FESC_ENA_MCLK BIT_1 /* Enable MAC Rx Clock in sleep mode */ #define PHY_M_FESC_SEL_CL_A BIT_0 /* Select Class A driver (100B-TX) */ /* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */ /***** PHY_MARV_PHY_CTRL (page 1) 16 bit r/w Fiber Specific Ctrl *****/ #define PHY_M_FIB_FORCE_LNK BIT_10 /* Force Link Good */ #define PHY_M_FIB_SIGD_POL BIT_9 /* SIGDET Polarity */ #define PHY_M_FIB_TX_DIS BIT_3 /* Transmitter Disable */ /***** PHY_MARV_PHY_CTRL (page 2) 16 bit r/w MAC Specific Ctrl *****/ #define PHY_M_MAC_MD_MSK (7<<7) /* Bit 9.. 7: Mode Select Mask */ #define PHY_M_MAC_MD_AUTO 3 /* Auto Copper/1000Base-X */ #define PHY_M_MAC_MD_COPPER 5 /* Copper only */ #define PHY_M_MAC_MD_1000BX 7 /* 1000Base-X only */ #define PHY_M_MAC_MODE_SEL(x) (SHIFT7(x) & PHY_M_MAC_MD_MSK) /***** PHY_MARV_PHY_CTRL (page 3) 16 bit r/w LED Control Reg. *****/ #define PHY_M_LEDC_LOS_MSK (0xf<<12) /* Bit 15..12: LOS LED Ctrl. Mask */ #define PHY_M_LEDC_INIT_MSK (0xf<<8) /* Bit 11.. 8: INIT LED Ctrl. Mask */ #define PHY_M_LEDC_STA1_MSK (0xf<<4) /* Bit 7.. 4: STAT1 LED Ctrl. Mask */ #define PHY_M_LEDC_STA0_MSK 0xf /* Bit 3.. 0: STAT0 LED Ctrl. Mask */ #define PHY_M_LEDC_LOS_CTRL(x) (SHIFT12(x) & PHY_M_LEDC_LOS_MSK) #define PHY_M_LEDC_INIT_CTRL(x) (SHIFT8(x) & PHY_M_LEDC_INIT_MSK) #define PHY_M_LEDC_STA1_CTRL(x) (SHIFT4(x) & PHY_M_LEDC_STA1_MSK) #define PHY_M_LEDC_STA0_CTRL(x) (SHIFT0(x) & PHY_M_LEDC_STA0_MSK) /***** PHY_MARV_PHY_STAT (page 3) 16 bit r/w Polarity Control Reg. *****/ #define PHY_M_POLC_LS1M_MSK (0xf<<12) /* Bit 15..12: LOS,STAT1 Mix % Mask */ #define PHY_M_POLC_IS0M_MSK (0xf<<8) /* Bit 11.. 8: INIT,STAT0 Mix % Mask */ #define PHY_M_POLC_LOS_MSK (0x3<<6) /* Bit 7.. 6: LOS Pol. Ctrl. Mask */ #define PHY_M_POLC_INIT_MSK (0x3<<4) /* Bit 5.. 4: INIT Pol. Ctrl. Mask */ #define PHY_M_POLC_STA1_MSK (0x3<<2) /* Bit 3.. 2: STAT1 Pol. Ctrl. Mask */ #define PHY_M_POLC_STA0_MSK 0x3 /* Bit 1.. 0: STAT0 Pol. Ctrl. Mask */ #define PHY_M_POLC_LS1_P_MIX(x) (SHIFT12(x) & PHY_M_POLC_LS1M_MSK) #define PHY_M_POLC_IS0_P_MIX(x) (SHIFT8(x) & PHY_M_POLC_IS0M_MSK) #define PHY_M_POLC_LOS_CTRL(x) (SHIFT6(x) & PHY_M_POLC_LOS_MSK) #define PHY_M_POLC_INIT_CTRL(x) (SHIFT4(x) & PHY_M_POLC_INIT_MSK) #define PHY_M_POLC_STA1_CTRL(x) (SHIFT2(x) & PHY_M_POLC_STA1_MSK) #define PHY_M_POLC_STA0_CTRL(x) (SHIFT0(x) & PHY_M_POLC_STA0_MSK) /* * GMAC registers * * The GMAC registers are 16 or 32 bits wide. * The GMACs host processor interface is 16 bits wide, * therefore ALL registers will be addressed with 16 bit accesses. * * Note: NA reg = Network Address e.g DA, SA etc. */ /* Port Registers */ #define GM_GP_STAT 0x0000 /* 16 bit r/o General Purpose Status */ #define GM_GP_CTRL 0x0004 /* 16 bit r/w General Purpose Control */ #define GM_TX_CTRL 0x0008 /* 16 bit r/w Transmit Control Reg. */ #define GM_RX_CTRL 0x000c /* 16 bit r/w Receive Control Reg. */ #define GM_TX_FLOW_CTRL 0x0010 /* 16 bit r/w Transmit Flow-Control */ #define GM_TX_PARAM 0x0014 /* 16 bit r/w Transmit Parameter Reg. */ #define GM_SERIAL_MODE 0x0018 /* 16 bit r/w Serial Mode Register */ /* Source Address Registers */ #define GM_SRC_ADDR_1L 0x001c /* 16 bit r/w Source Address 1 (low) */ #define GM_SRC_ADDR_1M 0x0020 /* 16 bit r/w Source Address 1 (middle) */ #define GM_SRC_ADDR_1H 0x0024 /* 16 bit r/w Source Address 1 (high) */ #define GM_SRC_ADDR_2L 0x0028 /* 16 bit r/w Source Address 2 (low) */ #define GM_SRC_ADDR_2M 0x002c /* 16 bit r/w Source Address 2 (middle) */ #define GM_SRC_ADDR_2H 0x0030 /* 16 bit r/w Source Address 2 (high) */ /* Multicast Address Hash Registers */ #define GM_MC_ADDR_H1 0x0034 /* 16 bit r/w Multicast Address Hash 1 */ #define GM_MC_ADDR_H2 0x0038 /* 16 bit r/w Multicast Address Hash 2 */ #define GM_MC_ADDR_H3 0x003c /* 16 bit r/w Multicast Address Hash 3 */ #define GM_MC_ADDR_H4 0x0040 /* 16 bit r/w Multicast Address Hash 4 */ /* Interrupt Source Registers */ #define GM_TX_IRQ_SRC 0x0044 /* 16 bit r/o Tx Overflow IRQ Source */ #define GM_RX_IRQ_SRC 0x0048 /* 16 bit r/o Rx Overflow IRQ Source */ #define GM_TR_IRQ_SRC 0x004c /* 16 bit r/o Tx/Rx Over. IRQ Source */ /* Interrupt Mask Registers */ #define GM_TX_IRQ_MSK 0x0050 /* 16 bit r/w Tx Overflow IRQ Mask */ #define GM_RX_IRQ_MSK 0x0054 /* 16 bit r/w Rx Overflow IRQ Mask */ #define GM_TR_IRQ_MSK 0x0058 /* 16 bit r/w Tx/Rx Over. IRQ Mask */ /* Serial Management Interface (SMI) Registers */ #define GM_SMI_CTRL 0x0080 /* 16 bit r/w SMI Control Register */ #define GM_SMI_DATA 0x0084 /* 16 bit r/w SMI Data Register */ #define GM_PHY_ADDR 0x0088 /* 16 bit r/w GPHY Address Register */ /* MIB Counters */ #define GM_MIB_CNT_BASE 0x0100 /* Base Address of MIB Counters */ #define GM_MIB_CNT_SIZE 44 /* Number of MIB Counters */ /* * MIB Counters base address definitions (low word) - * use offset 4 for access to high word (32 bit r/o) */ #define GM_RXF_UC_OK \ (GM_MIB_CNT_BASE + 0) /* Unicast Frames Received OK */ #define GM_RXF_BC_OK \ (GM_MIB_CNT_BASE + 8) /* Broadcast Frames Received OK */ #define GM_RXF_MPAUSE \ (GM_MIB_CNT_BASE + 16) /* Pause MAC Ctrl Frames Received */ #define GM_RXF_MC_OK \ (GM_MIB_CNT_BASE + 24) /* Multicast Frames Received OK */ #define GM_RXF_FCS_ERR \ (GM_MIB_CNT_BASE + 32) /* Rx Frame Check Seq. Error */ #define GM_RXO_OK_LO \ (GM_MIB_CNT_BASE + 48) /* Octets Received OK Low */ #define GM_RXO_OK_HI \ (GM_MIB_CNT_BASE + 56) /* Octets Received OK High */ #define GM_RXO_ERR_LO \ (GM_MIB_CNT_BASE + 64) /* Octets Received Invalid Low */ #define GM_RXO_ERR_HI \ (GM_MIB_CNT_BASE + 72) /* Octets Received Invalid High */ #define GM_RXF_SHT \ (GM_MIB_CNT_BASE + 80) /* Frames <64 Byte Received OK */ #define GM_RXE_FRAG \ (GM_MIB_CNT_BASE + 88) /* Frames <64 Byte Received with FCS Err */ #define GM_RXF_64B \ (GM_MIB_CNT_BASE + 96) /* 64 Byte Rx Frame */ #define GM_RXF_127B \ (GM_MIB_CNT_BASE + 104) /* 65-127 Byte Rx Frame */ #define GM_RXF_255B \ (GM_MIB_CNT_BASE + 112) /* 128-255 Byte Rx Frame */ #define GM_RXF_511B \ (GM_MIB_CNT_BASE + 120) /* 256-511 Byte Rx Frame */ #define GM_RXF_1023B \ (GM_MIB_CNT_BASE + 128) /* 512-1023 Byte Rx Frame */ #define GM_RXF_1518B \ (GM_MIB_CNT_BASE + 136) /* 1024-1518 Byte Rx Frame */ #define GM_RXF_MAX_SZ \ (GM_MIB_CNT_BASE + 144) /* 1519-MaxSize Byte Rx Frame */ #define GM_RXF_LNG_ERR \ (GM_MIB_CNT_BASE + 152) /* Rx Frame too Long Error */ #define GM_RXF_JAB_PKT \ (GM_MIB_CNT_BASE + 160) /* Rx Jabber Packet Frame */ #define GM_RXE_FIFO_OV \ (GM_MIB_CNT_BASE + 176) /* Rx FIFO overflow Event */ #define GM_TXF_UC_OK \ (GM_MIB_CNT_BASE + 192) /* Unicast Frames Xmitted OK */ #define GM_TXF_BC_OK \ (GM_MIB_CNT_BASE + 200) /* Broadcast Frames Xmitted OK */ #define GM_TXF_MPAUSE \ (GM_MIB_CNT_BASE + 208) /* Pause MAC Ctrl Frames Xmitted */ #define GM_TXF_MC_OK \ (GM_MIB_CNT_BASE + 216) /* Multicast Frames Xmitted OK */ #define GM_TXO_OK_LO \ (GM_MIB_CNT_BASE + 224) /* Octets Transmitted OK Low */ #define GM_TXO_OK_HI \ (GM_MIB_CNT_BASE + 232) /* Octets Transmitted OK High */ #define GM_TXF_64B \ (GM_MIB_CNT_BASE + 240) /* 64 Byte Tx Frame */ #define GM_TXF_127B \ (GM_MIB_CNT_BASE + 248) /* 65-127 Byte Tx Frame */ #define GM_TXF_255B \ (GM_MIB_CNT_BASE + 256) /* 128-255 Byte Tx Frame */ #define GM_TXF_511B \ (GM_MIB_CNT_BASE + 264) /* 256-511 Byte Tx Frame */ #define GM_TXF_1023B \ (GM_MIB_CNT_BASE + 272) /* 512-1023 Byte Tx Frame */ #define GM_TXF_1518B \ (GM_MIB_CNT_BASE + 280) /* 1024-1518 Byte Tx Frame */ #define GM_TXF_MAX_SZ \ (GM_MIB_CNT_BASE + 288) /* 1519-MaxSize Byte Tx Frame */ #define GM_TXF_COL \ (GM_MIB_CNT_BASE + 304) /* Tx Collision */ #define GM_TXF_LAT_COL \ (GM_MIB_CNT_BASE + 312) /* Tx Late Collision */ #define GM_TXF_ABO_COL \ (GM_MIB_CNT_BASE + 320) /* Tx aborted due to Exces. Col. */ #define GM_TXF_MUL_COL \ (GM_MIB_CNT_BASE + 328) /* Tx Multiple Collision */ #define GM_TXF_SNG_COL \ (GM_MIB_CNT_BASE + 336) /* Tx Single Collision */ #define GM_TXE_FIFO_UR \ (GM_MIB_CNT_BASE + 344) /* Tx FIFO Underrun Event */ /*----------------------------------------------------------------------------*/ /* * GMAC Bit Definitions * * If the bit access behaviour differs from the register access behaviour * (r/w, r/o) this is documented after the bit number. * The following bit access behaviours are used: * (sc) self clearing * (r/o) read only */ /* GM_GP_STAT 16 bit r/o General Purpose Status Register */ #define GM_GPSR_SPEED BIT_15 /* Port Speed (1 = 100 Mbps) */ #define GM_GPSR_DUPLEX BIT_14 /* Duplex Mode (1 = Full) */ #define GM_GPSR_FC_TX_DIS BIT_13 /* Tx Flow-Control Mode Disabled */ #define GM_GPSR_LINK_UP BIT_12 /* Link Up Status */ #define GM_GPSR_PAUSE BIT_11 /* Pause State */ #define GM_GPSR_TX_ACTIVE BIT_10 /* Tx in Progress */ #define GM_GPSR_EXC_COL BIT_9 /* Excessive Collisions Occured */ #define GM_GPSR_LAT_COL BIT_8 /* Late Collisions Occured */ #define GM_GPSR_PHY_ST_CH BIT_5 /* PHY Status Change */ #define GM_GPSR_GIG_SPEED BIT_4 /* Gigabit Speed (1 = 1000 Mbps) */ #define GM_GPSR_PART_MODE BIT_3 /* Partition mode */ #define GM_GPSR_FC_RX_DIS BIT_2 /* Rx Flow-Control Mode Disabled */ /* GM_GP_CTRL 16 bit r/w General Purpose Control Register */ #define GM_GPCR_RMII_PH_ENA BIT_15 /* Enable RMII for PHY (Yukon-FE only) */ #define GM_GPCR_RMII_LB_ENA BIT_14 /* Enable RMII Loopback (Yukon-FE only) */ #define GM_GPCR_FC_TX_DIS BIT_13 /* Disable Tx Flow-Control Mode */ #define GM_GPCR_TX_ENA BIT_12 /* Enable Transmit */ #define GM_GPCR_RX_ENA BIT_11 /* Enable Receive */ #define GM_GPCR_LOOP_ENA BIT_9 /* Enable MAC Loopback Mode */ #define GM_GPCR_PART_ENA BIT_8 /* Enable Partition Mode */ #define GM_GPCR_GIGS_ENA BIT_7 /* Gigabit Speed (1000 Mbps) */ #define GM_GPCR_FL_PASS BIT_6 /* Force Link Pass */ #define GM_GPCR_DUP_FULL BIT_5 /* Full Duplex Mode */ #define GM_GPCR_FC_RX_DIS BIT_4 /* Disable Rx Flow-Control Mode */ #define GM_GPCR_SPEED_100 BIT_3 /* Port Speed 100 Mbps */ #define GM_GPCR_AU_DUP_DIS BIT_2 /* Disable Auto-Update Duplex */ #define GM_GPCR_AU_FCT_DIS BIT_1 /* Disable Auto-Update Flow-C. */ #define GM_GPCR_AU_SPD_DIS BIT_0 /* Disable Auto-Update Speed */ #define GM_GPCR_SPEED_1000 (GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100) #define GM_GPCR_AU_ALL_DIS (GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS |\ GM_GPCR_AU_SPD_DIS) /* GM_TX_CTRL 16 bit r/w Transmit Control Register */ #define GM_TXCR_FORCE_JAM BIT_15 /* Force Jam / Flow-Control */ #define GM_TXCR_CRC_DIS BIT_14 /* Disable insertion of CRC */ #define GM_TXCR_PAD_DIS BIT_13 /* Disable padding of packets */ #define GM_TXCR_COL_THR_MSK (7<<10) /* Bit 12..10: Collision Threshold Mask */ #define GM_TXCR_PAD_PAT_MSK 0xff /* Bit 7.. 0: Padding Pattern Mask */ /* (Yukon-2 only) */ #define TX_COL_THR(x) (SHIFT10(x) & GM_TXCR_COL_THR_MSK) #define TX_COL_DEF 0x04 /* GM_RX_CTRL 16 bit r/w Receive Control Register */ #define GM_RXCR_UCF_ENA BIT_15 /* Enable Unicast filtering */ #define GM_RXCR_MCF_ENA BIT_14 /* Enable Multicast filtering */ #define GM_RXCR_CRC_DIS BIT_13 /* Remove 4-byte CRC */ #define GM_RXCR_PASS_FC BIT_12 /* Pass FC packets to FIFO (Yukon-1 only) */ /* GM_TX_PARAM 16 bit r/w Transmit Parameter Register */ #define GM_TXPA_JAMLEN_MSK (3<<14) /* Bit 15..14: Jam Length Mask */ #define GM_TXPA_JAMIPG_MSK (0x1f<<9) /* Bit 13.. 9: Jam IPG Mask */ #define GM_TXPA_JAMDAT_MSK (0x1f<<4) /* Bit 8.. 4: IPG Jam to Data Mask */ #define GM_TXPA_BO_LIM_MSK 0x0f /* Bit 3.. 0: Backoff Limit Mask */ /* (Yukon-2 only) */ #define TX_JAM_LEN_VAL(x) (SHIFT14(x) & GM_TXPA_JAMLEN_MSK) #define TX_JAM_IPG_VAL(x) (SHIFT9(x) & GM_TXPA_JAMIPG_MSK) #define TX_IPG_JAM_DATA(x) (SHIFT4(x) & GM_TXPA_JAMDAT_MSK) #define TX_BACK_OFF_LIM(x) ((x) & GM_TXPA_BO_LIM_MSK) #define TX_JAM_LEN_DEF 0x03 #define TX_JAM_IPG_DEF 0x0b #define TX_IPG_JAM_DEF 0x1c #define TX_BOF_LIM_DEF 0x04 /* GM_SERIAL_MODE 16 bit r/w Serial Mode Register */ #define GM_SMOD_DATABL_MSK (0x1f<<11) /* Bit 15..11: Data Blinder */ /* r/o on Yukon, r/w on Yukon-EC */ #define GM_SMOD_LIMIT_4 BIT_10 /* 4 consecutive Tx trials */ #define GM_SMOD_VLAN_ENA BIT_9 /* Enable VLAN (Max. Frame Len) */ #define GM_SMOD_JUMBO_ENA BIT_8 /* Enable Jumbo (Max. Frame Len) */ #define GM_SMOD_IPG_MSK 0x1f /* Bit 4.. 0: Inter-Packet Gap (IPG) */ #define DATA_BLIND_VAL(x) (SHIFT11(x) & GM_SMOD_DATABL_MSK) #define IPG_DATA_VAL(x) ((x) & GM_SMOD_IPG_MSK) #define DATA_BLIND_DEF 0x04 #define IPG_DATA_DEF 0x1e /* GM_SMI_CTRL 16 bit r/w SMI Control Register */ #define GM_SMI_CT_PHY_A_MSK (0x1f<<11) /* Bit 15..11: PHY Device Address */ #define GM_SMI_CT_REG_A_MSK (0x1f<<6) /* Bit 10.. 6: PHY Register Address */ #define GM_SMI_CT_OP_RD BIT_5 /* OpCode Read (0=Write)*/ #define GM_SMI_CT_RD_VAL BIT_4 /* Read Valid (Read completed) */ #define GM_SMI_CT_BUSY BIT_3 /* Busy (Operation in progress) */ #define GM_SMI_CT_PHY_AD(x) (SHIFT11(x) & GM_SMI_CT_PHY_A_MSK) #define GM_SMI_CT_REG_AD(x) (SHIFT6(x) & GM_SMI_CT_REG_A_MSK) /* GM_PHY_ADDR 16 bit r/w GPHY Address Register */ #define GM_PAR_MIB_CLR BIT_5 /* Set MIB Clear Counter Mode */ #define GM_PAR_MIB_TST BIT_4 /* MIB Load Counter (Test Mode) */ /* Receive Frame Status Encoding */ #define GMR_FS_LEN_MSK (0xffff<<16) /* Bit 31..16: Rx Frame Length */ #define GMR_FS_VLAN BIT_13 /* VLAN Packet */ #define GMR_FS_JABBER BIT_12 /* Jabber Packet */ #define GMR_FS_UN_SIZE BIT_11 /* Undersize Packet */ #define GMR_FS_MC BIT_10 /* Multicast Packet */ #define GMR_FS_BC BIT_9 /* Broadcast Packet */ #define GMR_FS_RX_OK BIT_8 /* Receive OK (Good Packet) */ #define GMR_FS_GOOD_FC BIT_7 /* Good Flow-Control Packet */ #define GMR_FS_BAD_FC BIT_6 /* Bad Flow-Control Packet */ #define GMR_FS_MII_ERR BIT_5 /* MII Error */ #define GMR_FS_LONG_ERR BIT_4 /* Too Long Packet */ #define GMR_FS_FRAGMENT BIT_3 /* Fragment */ #define GMR_FS_CRC_ERR BIT_1 /* CRC Error */ #define GMR_FS_RX_FF_OV BIT_0 /* Rx FIFO Overflow */ #define GMR_FS_LEN_SHIFT 16 #define GMR_FS_ANY_ERR ( \ GMR_FS_RX_FF_OV | \ GMR_FS_CRC_ERR | \ GMR_FS_FRAGMENT | \ GMR_FS_LONG_ERR | \ GMR_FS_MII_ERR | \ GMR_FS_BAD_FC | \ GMR_FS_UN_SIZE | \ GMR_FS_JABBER) /* Rx GMAC FIFO Flush Mask (default) */ #define RX_FF_FL_DEF_MSK GMR_FS_ANY_ERR /* Receive and Transmit GMAC FIFO Registers (YUKON only) */ /* RX_GMF_EA 32 bit Rx GMAC FIFO End Address */ /* RX_GMF_AF_THR 32 bit Rx GMAC FIFO Almost Full Thresh. */ /* RX_GMF_WP 32 bit Rx GMAC FIFO Write Pointer */ /* RX_GMF_WLEV 32 bit Rx GMAC FIFO Write Level */ /* RX_GMF_RP 32 bit Rx GMAC FIFO Read Pointer */ /* RX_GMF_RLEV 32 bit Rx GMAC FIFO Read Level */ /* TX_GMF_EA 32 bit Tx GMAC FIFO End Address */ /* TX_GMF_AE_THR 32 bit Tx GMAC FIFO Almost Empty Thresh.*/ /* TX_GMF_WP 32 bit Tx GMAC FIFO Write Pointer */ /* TX_GMF_WSP 32 bit Tx GMAC FIFO Write Shadow Pointer */ /* TX_GMF_WLEV 32 bit Tx GMAC FIFO Write Level */ /* TX_GMF_RP 32 bit Tx GMAC FIFO Read Pointer */ /* TX_GMF_RSTP 32 bit Tx GMAC FIFO Restart Pointer */ /* TX_GMF_RLEV 32 bit Tx GMAC FIFO Read Level */ /* RX_GMF_CTRL_T 32 bit Rx GMAC FIFO Control/Test */ #define RX_TRUNC_ON BIT_27 /* enable packet truncation */ #define RX_TRUNC_OFF BIT_26 /* disable packet truncation */ #define RX_VLAN_STRIP_ON BIT_25 /* enable VLAN stripping */ #define RX_VLAN_STRIP_OFF BIT_24 /* disable VLAN stripping */ #define GMF_RX_MACSEC_FLUSH_ON BIT_23 #define GMF_RX_MACSEC_FLUSH_OFF BIT_22 #define GMF_RX_OVER_ON BIT_19 /* enable flushing on receive overrun */ #define GMF_RX_OVER_OFF BIT_18 /* disable flushing on receive overrun */ #define GMF_ASF_RX_OVER_ON BIT_17 /* enable flushing of ASF when overrun */ #define GMF_ASF_RX_OVER_OFF BIT_16 /* disable flushing of ASF when overrun */ #define GMF_WP_TST_ON BIT_14 /* Write Pointer Test On */ #define GMF_WP_TST_OFF BIT_13 /* Write Pointer Test Off */ #define GMF_WP_STEP BIT_12 /* Write Pointer Step/Increment */ #define GMF_RP_TST_ON BIT_10 /* Read Pointer Test On */ #define GMF_RP_TST_OFF BIT_9 /* Read Pointer Test Off */ #define GMF_RP_STEP BIT_8 /* Read Pointer Step/Increment */ #define GMF_RX_F_FL_ON BIT_7 /* Rx FIFO Flush Mode On */ #define GMF_RX_F_FL_OFF BIT_6 /* Rx FIFO Flush Mode Off */ #define GMF_CLI_RX_FO BIT_5 /* Clear IRQ Rx FIFO Overrun */ #define GMF_CLI_RX_FC BIT_4 /* Clear IRQ Rx Frame Complete */ #define GMF_OPER_ON BIT_3 /* Operational Mode On */ #define GMF_OPER_OFF BIT_2 /* Operational Mode Off */ #define GMF_RST_CLR BIT_1 /* Clear GMAC FIFO Reset */ #define GMF_RST_SET BIT_0 /* Set GMAC FIFO Reset */ /* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test (YUKON and Yukon-2) */ #define TX_STFW_DIS BIT_31 /* Disable Store & Forward (Yukon-EC Ultra) */ #define TX_STFW_ENA BIT_30 /* Enable Store & Forward (Yukon-EC Ultra) */ #define TX_VLAN_TAG_ON BIT_25 /* enable VLAN tagging */ #define TX_VLAN_TAG_OFF BIT_24 /* disable VLAN tagging */ #define TX_JUMBO_ENA BIT_23 /* Enable Jumbo Mode (Yukon-EC Ultra) */ #define TX_JUMBO_DIS BIT_22 /* Disable Jumbo Mode (Yukon-EC Ultra) */ #define GMF_WSP_TST_ON BIT_18 /* Write Shadow Pointer Test On */ #define GMF_WSP_TST_OFF BIT_17 /* Write Shadow Pointer Test Off */ #define GMF_WSP_STEP BIT_16 /* Write Shadow Pointer Step/Increment */ /* Bits 15..8: same as for RX_GMF_CTRL_T */ #define GMF_CLI_TX_FU BIT_6 /* Clear IRQ Tx FIFO Underrun */ #define GMF_CLI_TX_FC BIT_5 /* Clear IRQ Tx Frame Complete */ #define GMF_CLI_TX_PE BIT_4 /* Clear IRQ Tx Parity Error */ /* Bits 3..0: same as for RX_GMF_CTRL_T */ #define GMF_RX_CTRL_DEF (GMF_OPER_ON | GMF_RX_F_FL_ON) #define GMF_TX_CTRL_DEF GMF_OPER_ON #define RX_GMF_AF_THR_MIN 0x0c /* Rx GMAC FIFO Almost Full Thresh. min. */ #define RX_GMF_FL_THR_DEF 0x0a /* Rx GMAC FIFO Flush Threshold default */ /* GMAC_TI_ST_CTRL 8 bit Time Stamp Timer Ctrl Reg (YUKON only) */ #define GMT_ST_START BIT_2 /* Start Time Stamp Timer */ #define GMT_ST_STOP BIT_1 /* Stop Time Stamp Timer */ #define GMT_ST_CLR_IRQ BIT_0 /* Clear Time Stamp Timer IRQ */ /* POLL_CTRL 32 bit Polling Unit control register (Yukon-2 only) */ #define PC_CLR_IRQ_CHK BIT_5 /* Clear IRQ Check */ #define PC_POLL_RQ BIT_4 /* Poll Request Start */ #define PC_POLL_OP_ON BIT_3 /* Operational Mode On */ #define PC_POLL_OP_OFF BIT_2 /* Operational Mode Off */ #define PC_POLL_RST_CLR BIT_1 /* Clear Polling Unit Reset (Enable) */ #define PC_POLL_RST_SET BIT_0 /* Set Polling Unit Reset */ /* B28_Y2_ASF_STAT_CMD 32 bit ASF Status and Command Reg */ /* This register is used by the host driver software */ #define Y2_ASF_OS_PRES BIT_4 /* ASF operation system present */ #define Y2_ASF_RESET BIT_3 /* ASF system in reset state */ #define Y2_ASF_RUNNING BIT_2 /* ASF system operational */ #define Y2_ASF_CLR_HSTI BIT_1 /* Clear ASF IRQ */ #define Y2_ASF_IRQ BIT_0 /* Issue an IRQ to ASF system */ #define Y2_ASF_UC_STATE (3<<2) /* ASF uC State */ #define Y2_ASF_CLK_HALT 0 /* ASF system clock stopped */ /* B28_Y2_ASF_HCU_CCSR 32bit CPU Control and Status Register (Yukon EX) */ #define Y2_ASF_HCU_CCSR_SMBALERT_MONITOR BIT_27 /* SMBALERT pin monitor */ #define Y2_ASF_HCU_CCSR_CPU_SLEEP BIT_26 /* CPU sleep status */ #define Y2_ASF_HCU_CCSR_CS_TO BIT_25 /* Clock Stretching Timeout */ #define Y2_ASF_HCU_CCSR_WDOG BIT_24 /* Watchdog Reset */ #define Y2_ASF_HCU_CCSR_CLR_IRQ_HOST BIT_17 /* Clear IRQ_HOST */ #define Y2_ASF_HCU_CCSR_SET_IRQ_HCU BIT_16 /* Set IRQ_HCU */ #define Y2_ASF_HCU_CCSR_AHB_RST BIT_9 /* Reset AHB bridge */ #define Y2_ASF_HCU_CCSR_CPU_RST_MODE BIT_8 /* CPU Reset Mode */ #define Y2_ASF_HCU_CCSR_SET_SYNC_CPU BIT_5 #define Y2_ASF_HCU_CCSR_CPU_CLK_DIVIDE1 BIT_4 #define Y2_ASF_HCU_CCSR_CPU_CLK_DIVIDE0 BIT_3 #define Y2_ASF_HCU_CCSR_CPU_CLK_DIVIDE_MSK (BIT_4 | BIT_3) /* CPU Clock Divide */ #define Y2_ASF_HCU_CCSR_CPU_CLK_DIVIDE_BASE BIT_3 #define Y2_ASF_HCU_CCSR_OS_PRSNT BIT_2 /* ASF OS Present */ /* Microcontroller State */ #define Y2_ASF_HCU_CCSR_UC_STATE_MSK 3 #define Y2_ASF_HCU_CCSR_UC_STATE_BASE BIT_0 #define Y2_ASF_HCU_CCSR_ASF_RESET 0 #define Y2_ASF_HCU_CCSR_ASF_HALTED BIT_1 #define Y2_ASF_HCU_CCSR_ASF_RUNNING BIT_0 /* B28_Y2_ASF_HOST_COM 32 bit ASF Host Communication Reg */ /* This register is used by the ASF firmware */ #define Y2_ASF_CLR_ASFI BIT_1 /* Clear host IRQ */ #define Y2_ASF_HOST_IRQ BIT_0 /* Issue an IRQ to HOST system */ /* STAT_CTRL 32 bit Status BMU control register (Yukon-2 only) */ #define SC_STAT_CLR_IRQ BIT_4 /* Status Burst IRQ clear */ #define SC_STAT_OP_ON BIT_3 /* Operational Mode On */ #define SC_STAT_OP_OFF BIT_2 /* Operational Mode Off */ #define SC_STAT_RST_CLR BIT_1 /* Clear Status Unit Reset (Enable) */ #define SC_STAT_RST_SET BIT_0 /* Set Status Unit Reset */ /* GMAC_CTRL 32 bit GMAC Control Reg (YUKON only) */ #define GMC_SEC_RST BIT_15 /* MAC SEC RST */ #define GMC_SEC_RST_OFF BIT_14 /* MAC SEC RST Off */ #define GMC_BYP_MACSECRX_ON BIT_13 /* Bypass MAC SEC RX */ #define GMC_BYP_MACSECRX_OFF BIT_12 /* Bypass MAC SEC RX Off */ #define GMC_BYP_MACSECTX_ON BIT_11 /* Bypass MAC SEC TX */ #define GMC_BYP_MACSECTX_OFF BIT_10 /* Bypass MAC SEC TX Off */ #define GMC_BYP_RETR_ON BIT_9 /* Bypass MAC retransmit FIFO On */ #define GMC_BYP_RETR_OFF BIT_8 /* Bypass MAC retransmit FIFO Off */ #define GMC_H_BURST_ON BIT_7 /* Half Duplex Burst Mode On */ #define GMC_H_BURST_OFF BIT_6 /* Half Duplex Burst Mode Off */ #define GMC_F_LOOPB_ON BIT_5 /* FIFO Loopback On */ #define GMC_F_LOOPB_OFF BIT_4 /* FIFO Loopback Off */ #define GMC_PAUSE_ON BIT_3 /* Pause On */ #define GMC_PAUSE_OFF BIT_2 /* Pause Off */ #define GMC_RST_CLR BIT_1 /* Clear GMAC Reset */ #define GMC_RST_SET BIT_0 /* Set GMAC Reset */ /* GPHY_CTRL 32 bit GPHY Control Reg (YUKON only) */ #define GPC_SEL_BDT BIT_28 /* Select Bi-Dir. Transfer for MDC/MDIO */ #define GPC_INT_POL BIT_27 /* IRQ Polarity is Active Low */ #define GPC_75_OHM BIT_26 /* Use 75 Ohm Termination instead of 50 */ #define GPC_DIS_FC BIT_25 /* Disable Automatic Fiber/Copper Detection */ #define GPC_DIS_SLEEP BIT_24 /* Disable Energy Detect */ #define GPC_HWCFG_M_3 BIT_23 /* HWCFG_MODE[3] */ #define GPC_HWCFG_M_2 BIT_22 /* HWCFG_MODE[2] */ #define GPC_HWCFG_M_1 BIT_21 /* HWCFG_MODE[1] */ #define GPC_HWCFG_M_0 BIT_20 /* HWCFG_MODE[0] */ #define GPC_ANEG_0 BIT_19 /* ANEG[0] */ #define GPC_ENA_XC BIT_18 /* Enable MDI crossover */ #define GPC_DIS_125 BIT_17 /* Disable 125 MHz clock */ #define GPC_ANEG_3 BIT_16 /* ANEG[3] */ #define GPC_ANEG_2 BIT_15 /* ANEG[2] */ #define GPC_ANEG_1 BIT_14 /* ANEG[1] */ #define GPC_ENA_PAUSE BIT_13 /* Enable Pause (SYM_OR_REM) */ #define GPC_PHYADDR_4 BIT_12 /* Bit 4 of Phy Addr */ #define GPC_PHYADDR_3 BIT_11 /* Bit 3 of Phy Addr */ #define GPC_PHYADDR_2 BIT_10 /* Bit 2 of Phy Addr */ #define GPC_PHYADDR_1 BIT_9 /* Bit 1 of Phy Addr */ #define GPC_PHYADDR_0 BIT_8 /* Bit 0 of Phy Addr */ #define GPC_RST_CLR BIT_1 /* Clear GPHY Reset */ #define GPC_RST_SET BIT_0 /* Set GPHY Reset */ /* GMAC_IRQ_SRC 8 bit GMAC Interrupt Source Reg (YUKON only) */ /* GMAC_IRQ_MSK 8 bit GMAC Interrupt Mask Reg (YUKON only) */ #define GM_IS_RX_CO_OV BIT_5 /* Receive Counter Overflow IRQ */ #define GM_IS_TX_CO_OV BIT_4 /* Transmit Counter Overflow IRQ */ #define GM_IS_TX_FF_UR BIT_3 /* Transmit FIFO Underrun */ #define GM_IS_TX_COMPL BIT_2 /* Frame Transmission Complete */ #define GM_IS_RX_FF_OR BIT_1 /* Receive FIFO Overrun */ #define GM_IS_RX_COMPL BIT_0 /* Frame Reception Complete */ #define GMAC_DEF_MSK (GM_IS_RX_CO_OV | GM_IS_TX_CO_OV | GM_IS_TX_FF_UR) /* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */ #define GMLC_RST_CLR BIT_1 /* Clear GMAC Link Reset */ #define GMLC_RST_SET BIT_0 /* Set GMAC Link Reset */ #define MSK_PORT_A 0 #define MSK_PORT_B 1 /* Register access macros */ #define CSR_WRITE_4(sc, reg, val) \ bus_space_write_4((sc)->msk_res_bt, (sc)->msk_res_bh, (reg), (val)) #define CSR_WRITE_2(sc, reg, val) \ bus_space_write_2((sc)->msk_res_bt, (sc)->msk_res_bh, (reg), (val)) #define CSR_WRITE_1(sc, reg, val) \ bus_space_write_1((sc)->msk_res_bt, (sc)->msk_res_bh, (reg), (val)) #define CSR_READ_4(sc, reg) \ bus_space_read_4((sc)->msk_res_bt, (sc)->msk_res_bh, (reg)) #define CSR_READ_2(sc, reg) \ bus_space_read_2((sc)->msk_res_bt, (sc)->msk_res_bh, (reg)) #define CSR_READ_1(sc, reg) \ bus_space_read_1((sc)->msk_res_bt, (sc)->msk_res_bh, (reg)) #define CSR_PCI_WRITE_4(sc, reg, val) \ bus_space_write_4((sc)->msk_res_bt, (sc)->msk_res_bh, \ Y2_CFG_SPC + (reg), (val)) #define CSR_PCI_WRITE_2(sc, reg, val) \ bus_space_write_2((sc)->msk_res_bt, (sc)->msk_res_bh, \ Y2_CFG_SPC + (reg), (val)) #define CSR_PCI_WRITE_1(sc, reg, val) \ bus_space_write_1((sc)->msk_res_bt, (sc)->msk_res_bh, \ Y2_CFG_SPC + (reg), (val)) #define CSR_PCI_READ_4(sc, reg) \ bus_space_read_4((sc)->msk_res_bt, (sc)->msk_res_bh, Y2_CFG_SPC + (reg)) #define CSR_PCI_READ_2(sc, reg) \ bus_space_read_2((sc)->msk_res_bt, (sc)->msk_res_bh, Y2_CFG_SPC + (reg)) #define CSR_PCI_READ_1(sc, reg) \ bus_space_read_1((sc)->msk_res_bt, (sc)->msk_res_bh, Y2_CFG_SPC + (reg)) #define MSK_IF_READ_4(sc_if, reg) \ CSR_READ_4((sc_if)->msk_softc, (reg)) #define MSK_IF_READ_2(sc_if, reg) \ CSR_READ_2((sc_if)->msk_softc, (reg)) #define MSK_IF_READ_1(sc_if, reg) \ CSR_READ_1((sc_if)->msk_softc, (reg)) #define MSK_IF_WRITE_4(sc_if, reg, val) \ CSR_WRITE_4((sc_if)->msk_softc, (reg), (val)) #define MSK_IF_WRITE_2(sc_if, reg, val) \ CSR_WRITE_2((sc_if)->msk_softc, (reg), (val)) #define MSK_IF_WRITE_1(sc_if, reg, val) \ CSR_WRITE_1((sc_if)->msk_softc, (reg), (val)) #define GMAC_REG(port, reg) \ ((BASE_GMAC_1 + (port) * (BASE_GMAC_2 - BASE_GMAC_1)) | (reg)) #define GMAC_WRITE_2(sc, port, reg, val) \ CSR_WRITE_2((sc), GMAC_REG((port), (reg)), (val)) #define GMAC_READ_2(sc, port, reg) \ CSR_READ_2((sc), GMAC_REG((port), (reg))) /* GPHY address (bits 15..11 of SMI control reg) */ #define PHY_ADDR_MARV 0 #define MSK_ADDR_LO(x) ((uint64_t) (x) & 0xffffffffUL) #define MSK_ADDR_HI(x) ((uint64_t) (x) >> 32) /* * At first I guessed 8 bytes, the size of a single descriptor, would be * required alignment constraints. But, it seems that Yukon II have 4096 * bytes boundary alignment constraints. */ #define MSK_RING_ALIGN 4096 #define MSK_STAT_ALIGN 4096 /* Rx descriptor data structure */ struct msk_rx_desc { uint32_t msk_addr; uint32_t msk_control; }; /* Tx descriptor data structure */ struct msk_tx_desc { uint32_t msk_addr; uint32_t msk_control; }; /* Status descriptor data structure */ struct msk_stat_desc { uint32_t msk_status; uint32_t msk_control; }; /* mask and shift value to get Tx async queue status for port 1 */ #define STLE_TXA1_MSKL 0x00000fff #define STLE_TXA1_SHIFTL 0 /* mask and shift value to get Tx sync queue status for port 1 */ #define STLE_TXS1_MSKL 0x00fff000 #define STLE_TXS1_SHIFTL 12 /* mask and shift value to get Tx async queue status for port 2 */ #define STLE_TXA2_MSKL 0xff000000 #define STLE_TXA2_SHIFTL 24 #define STLE_TXA2_MSKH 0x000f /* this one shifts up */ #define STLE_TXA2_SHIFTH 8 /* mask and shift value to get Tx sync queue status for port 2 */ #define STLE_TXS2_MSKL 0x00000000 #define STLE_TXS2_SHIFTL 0 #define STLE_TXS2_MSKH 0xfff0 #define STLE_TXS2_SHIFTH 4 /* YUKON-2 bit values */ #define HW_OWNER 0x80000000 #define SW_OWNER 0x00000000 #define PU_PUTIDX_VALID 0x10000000 /* YUKON-2 Control flags */ #define UDPTCP 0x00010000 #define CALSUM 0x00020000 #define WR_SUM 0x00040000 #define INIT_SUM 0x00080000 #define LOCK_SUM 0x00100000 #define INS_VLAN 0x00200000 #define FRC_STAT 0x00400000 #define EOP 0x00800000 #define TX_LOCK 0x01000000 #define BUF_SEND 0x02000000 #define PACKET_SEND 0x04000000 #define NO_WARNING 0x40000000 #define NO_UPDATE 0x80000000 /* YUKON-2 Rx/Tx opcodes defines */ #define OP_TCPWRITE 0x11000000 #define OP_TCPSTART 0x12000000 #define OP_TCPINIT 0x14000000 #define OP_TCPLCK 0x18000000 #define OP_TCPCHKSUM OP_TCPSTART #define OP_TCPIS (OP_TCPINIT | OP_TCPSTART) #define OP_TCPLW (OP_TCPLCK | OP_TCPWRITE) #define OP_TCPLSW (OP_TCPLCK | OP_TCPSTART | OP_TCPWRITE) #define OP_TCPLISW (OP_TCPLCK | OP_TCPINIT | OP_TCPSTART | OP_TCPWRITE) #define OP_ADDR64 0x21000000 #define OP_VLAN 0x22000000 #define OP_ADDR64VLAN (OP_ADDR64 | OP_VLAN) #define OP_LRGLEN 0x24000000 #define OP_LRGLENVLAN (OP_LRGLEN | OP_VLAN) #define OP_BUFFER 0x40000000 #define OP_PACKET 0x41000000 #define OP_LARGESEND 0x43000000 /* YUKON-2 STATUS opcodes defines */ #define OP_RXSTAT 0x60000000 #define OP_RXTIMESTAMP 0x61000000 #define OP_RXVLAN 0x62000000 #define OP_RXCHKS 0x64000000 #define OP_RXCHKSVLAN (OP_RXCHKS | OP_RXVLAN) #define OP_RXTIMEVLAN (OP_RXTIMESTAMP | OP_RXVLAN) #define OP_RSS_HASH 0x65000000 #define OP_TXINDEXLE 0x68000000 /* YUKON-2 SPECIAL opcodes defines */ #define OP_PUTIDX 0x70000000 #define STLE_OP_MASK 0xff000000 #define STLE_CSS_MASK 0x00ff0000 #define STLE_LEN_MASK 0x0000ffff /* CSS defined in status LE(valid for descriptor V2 format). */ #define CSS_TCPUDP_CSUM_OK 0x00800000 #define CSS_UDP 0x00400000 #define CSS_TCP 0x00200000 #define CSS_IPFRAG 0x00100000 #define CSS_IPV6 0x00080000 #define CSS_IPV4_CSUM_OK 0x00040000 #define CSS_IPV4 0x00020000 #define CSS_PORT 0x00010000 /* Descriptor Bit Definition */ /* TxCtrl Transmit Buffer Control Field */ /* RxCtrl Receive Buffer Control Field */ #define BMU_OWN BIT_31 /* OWN bit: 0=host/1=BMU */ #define BMU_STF BIT_30 /* Start of Frame */ #define BMU_EOF BIT_29 /* End of Frame */ #define BMU_IRQ_EOB BIT_28 /* Req "End of Buffer" IRQ */ #define BMU_IRQ_EOF BIT_27 /* Req "End of Frame" IRQ */ /* TxCtrl specific bits */ #define BMU_STFWD BIT_26 /* (Tx) Store & Forward Frame */ #define BMU_NO_FCS BIT_25 /* (Tx) Disable MAC FCS (CRC) generation */ #define BMU_SW BIT_24 /* (Tx) 1 bit res. for SW use */ /* RxCtrl specific bits */ #define BMU_DEV_0 BIT_26 /* (Rx) Transfer data to Dev0 */ #define BMU_STAT_VAL BIT_25 /* (Rx) Rx Status Valid */ #define BMU_TIST_VAL BIT_24 /* (Rx) Rx TimeStamp Valid */ /* Bit 23..16: BMU Check Opcodes */ #define BMU_CHECK (0x55<<16) /* Default BMU check */ #define BMU_TCP_CHECK (0x56<<16) /* Descr with TCP ext */ #define BMU_UDP_CHECK (0x57<<16) /* Descr with UDP ext (YUKON only) */ #define BMU_BBC 0xffff /* Bit 15.. 0: Buffer Byte Counter */ #define MSK_TX_RING_CNT 256 #define MSK_RX_RING_CNT 256 #define MSK_RX_BUF_ALIGN 8 #define MSK_JUMBO_RX_RING_CNT MSK_RX_RING_CNT #define MSK_STAT_RING_CNT ((1 + 3) * (MSK_TX_RING_CNT + MSK_RX_RING_CNT)) #define MSK_MAXTXSEGS 32 #define MSK_MAXSGSIZE 4096 #define MSK_TSO_MAXSIZE (65535 + sizeof(struct ether_vlan_header)) #define MSK_MAXRXSEGS 32 /* * It seems that the hardware requires extra decriptors(LEs) to offload * TCP/UDP checksum, VLAN hardware tag inserstion and TSO. * * 1 descriptor for TCP/UDP checksum offload. * 1 descriptor VLAN hardware tag insertion. * 1 descriptor for TSO(TCP Segmentation Offload) * 1 descriptor for 64bits DMA : Not applicatable due to the use of * BUS_SPACE_MAXADDR_32BIT in parent DMA tag creation. */ #define MSK_RESERVED_TX_DESC_CNT 3 /* * Jumbo buffer stuff. Note that we must allocate more jumbo * buffers than there are descriptors in the receive ring. This * is because we don't know how long it will take for a packet * to be released after we hand it off to the upper protocol * layers. To be safe, we allocate 1.5 times the number of * receive descriptors. */ #define MSK_JUMBO_FRAMELEN 9022 #define MSK_JUMBO_MTU (MSK_JUMBO_FRAMELEN-ETHER_HDR_LEN-ETHER_CRC_LEN) #define MSK_MAX_FRAMELEN \ (ETHER_MAX_LEN + EVL_ENCAPLEN - ETHER_CRC_LEN) #define MSK_MIN_FRAMELEN (ETHER_MIN_LEN - ETHER_CRC_LEN) #define MSK_JSLOTS ((MSK_RX_RING_CNT * 3) / 2) #define MSK_JRAWLEN (MSK_JUMBO_FRAMELEN + ETHER_ALIGN) #define MSK_JLEN (MSK_JRAWLEN + (sizeof(uint64_t) - \ (MSK_JRAWLEN % sizeof(uint64_t)))) #define MSK_JPAGESZ PAGE_SIZE #define MSK_RESID \ (MSK_JPAGESZ - (MSK_JLEN * MSK_JSLOTS) % MSK_JPAGESZ) #define MSK_JMEM ((MSK_JLEN * MSK_JSLOTS) + MSK_RESID) struct msk_jpool_entry { int slot; SLIST_ENTRY(msk_jpool_entry) jpool_entries; }; struct msk_txdesc { struct mbuf *tx_m; bus_dmamap_t tx_dmamap; struct msk_tx_desc *tx_le; }; struct msk_rxdesc { struct mbuf *rx_m; bus_dmamap_t rx_dmamap; struct msk_rx_desc *rx_le; }; struct msk_chain_data { bus_dma_tag_t msk_parent_tag; bus_dma_tag_t msk_tx_tag; struct msk_txdesc msk_txdesc[MSK_TX_RING_CNT]; bus_dma_tag_t msk_rx_tag; struct msk_rxdesc msk_rxdesc[MSK_RX_RING_CNT]; bus_dma_tag_t msk_tx_ring_tag; bus_dma_tag_t msk_rx_ring_tag; bus_dmamap_t msk_tx_ring_map; bus_dmamap_t msk_rx_ring_map; bus_dmamap_t msk_rx_sparemap; #ifdef MSK_JUMBO bus_dma_tag_t msk_jumbo_rx_tag; bus_dma_tag_t msk_jumbo_tag; bus_dmamap_t msk_jumbo_map; bus_dma_tag_t msk_jumbo_mtag; caddr_t msk_jslots[MSK_JSLOTS]; struct msk_rxdesc msk_jumbo_rxdesc[MSK_JUMBO_RX_RING_CNT]; bus_dma_tag_t msk_jumbo_rx_ring_tag; bus_dmamap_t msk_jumbo_rx_ring_map; bus_dmamap_t msk_jumbo_rx_sparemap; #endif int msk_tx_prod; int msk_tx_cons; int msk_tx_cnt; int msk_tx_put; int msk_rx_cons; int msk_rx_prod; int msk_rx_putwm; }; struct msk_ring_data { struct msk_tx_desc *msk_tx_ring; bus_addr_t msk_tx_ring_paddr; struct msk_rx_desc *msk_rx_ring; bus_addr_t msk_rx_ring_paddr; struct msk_rx_desc *msk_jumbo_rx_ring; bus_addr_t msk_jumbo_rx_ring_paddr; void *msk_jumbo_buf; bus_addr_t msk_jumbo_buf_paddr; }; #define MSK_TX_RING_ADDR(sc, i) \ ((sc)->msk_rdata.msk_tx_ring_paddr + sizeof(struct msk_tx_desc) * (i)) #define MSK_RX_RING_ADDR(sc, i) \ ((sc)->msk_rdata.msk_rx_ring_paddr + sizeof(struct msk_rx_desc) * (i)) #define MSK_JUMBO_RX_RING_ADDR(sc, i) \ ((sc)->msk_rdata.msk_jumbo_rx_ring_paddr + sizeof(struct msk_rx_desc) * (i)) #define MSK_TX_RING_SZ \ (sizeof(struct msk_tx_desc) * MSK_TX_RING_CNT) #define MSK_RX_RING_SZ \ (sizeof(struct msk_rx_desc) * MSK_RX_RING_CNT) #define MSK_JUMBO_RX_RING_SZ \ (sizeof(struct msk_rx_desc) * MSK_JUMBO_RX_RING_CNT) #define MSK_STAT_RING_SZ \ (sizeof(struct msk_stat_desc) * MSK_STAT_RING_CNT) #define MSK_INC(x, y) (x) = (x + 1) % y #define MSK_PCI_BUS 0 #define MSK_PCIX_BUS 1 #define MSK_PEX_BUS 2 #define MSK_PROC_DEFAULT (MSK_RX_RING_CNT / 2) #define MSK_PROC_MIN 30 #define MSK_PROC_MAX (MSK_RX_RING_CNT - 1) #define MSK_TX_TIMEOUT 5 #define MSK_PUT_WM 10 /* Forward decl. */ struct msk_if_softc; /* Softc for the Marvell Yukon II controller. */ struct msk_softc { device_t msk_dev; int msk_res_rid; int msk_res_type; struct resource *msk_res; /* I/O port/mem resource */ bus_space_tag_t msk_res_bt; bus_space_handle_t msk_res_bh; int msk_irq_type; int msk_irq_rid; struct resource *msk_irq; /* IRQ resources */ void *msk_intrhand; /* irq handler handle */ uint8_t msk_hw_id; uint8_t msk_hw_rev; uint8_t msk_bustype; uint8_t msk_num_port; uint8_t msk_pciecap; uint8_t msk_pcixcap; int msk_ramsize; /* amount of SRAM on NIC */ uint32_t msk_pmd; /* physical media type */ uint32_t msk_coppertype; uint32_t msk_intrmask; uint32_t msk_intrhwemask; uint32_t msk_pflags; int msk_suspended; int msk_clock; struct msk_if_softc *msk_if[2]; device_t msk_devs[2]; int msk_txqsize; int msk_rxqsize; int msk_txqstart[2]; int msk_txqend[2]; int msk_rxqstart[2]; int msk_rxqend[2]; bus_dma_tag_t msk_stat_tag; bus_dmamap_t msk_stat_map; struct msk_stat_desc *msk_stat_ring; bus_addr_t msk_stat_ring_paddr; int msk_stat_cons; struct lwkt_serialize msk_serializer; /* * Sysctl variables */ int msk_process_limit; int msk_intr_rate; int msk_defrag_avoided; int msk_leading_copied; int msk_trailing_copied; }; #define MSK_USECS(sc, us) ((sc)->msk_clock * (us)) /* Softc for each logical interface. */ struct msk_if_softc { struct arpcom arpcom; struct ifnet *msk_ifp; /* interface info */ device_t msk_miibus; device_t msk_if_dev; int32_t msk_port; /* port # on controller */ int msk_framesize; int msk_phytype; int msk_phyaddr; int msk_link; uint32_t msk_flags; #define MSK_FLAG_FASTETHER 0x0004 #define MSK_FLAG_RAMBUF 0x0010 #define MSK_FLAG_NORXCHK 0x0100 struct callout msk_tick_ch; uint32_t msk_txq; /* Tx. Async Queue offset */ uint32_t msk_txsq; /* Tx. Syn Queue offset */ uint32_t msk_rxq; /* Rx. Qeueue offset */ struct msk_chain_data msk_cdata; struct msk_ring_data msk_rdata; struct msk_softc *msk_softc; /* parent controller */ int msk_if_flags; int msk_detach; uint16_t msk_vtag; /* VLAN tag id. */ #ifdef MSK_JUMBO SLIST_HEAD(__msk_jfreehead, msk_jpool_entry) msk_jfree_listhead; SLIST_HEAD(__msk_jinusehead, msk_jpool_entry) msk_jinuse_listhead; struct mtx msk_jlist_mtx; #endif }; #define MSK_TIMEOUT 1000 #define MSK_PHY_POWERUP 1 #define MSK_PHY_POWERDOWN 0 #define MSK_SPARE_TX_DESC_CNT 5 #define MSK_IS_OACTIVE(sc_if) \ ((sc_if)->msk_cdata.msk_tx_cnt + \ MSK_RESERVED_TX_DESC_CNT + MSK_SPARE_TX_DESC_CNT > MSK_TX_RING_CNT)