/*- * Copyright (c) 1999,2000 Michael Smith * Copyright (c) 2000 BSDi * Copyright (c) 2005 Scott Long * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /*- * Copyright (c) 2002 Eric Moore * Copyright (c) 2002, 2004 LSI Logic Corporation * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The party using or redistributing the source code and binary forms * agrees to the disclaimer below and the terms and conditions set forth * herein. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD: src/sys/dev/amr/amr.c,v 1.99 2012/08/31 09:42:46 scottl Exp $ */ /* * Driver for the AMI MegaRaid family of controllers. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define AMR_DEFINE_TABLES #include SYSCTL_NODE(_hw, OID_AUTO, amr, CTLFLAG_RD, 0, "AMR driver parameters"); static d_open_t amr_open; static d_close_t amr_close; static d_ioctl_t amr_ioctl; static struct dev_ops amr_ops = { { "amr", 0, 0 }, .d_open = amr_open, .d_close = amr_close, .d_ioctl = amr_ioctl, }; int linux_no_adapter = 0; /* * Initialisation, bus interface. */ static void amr_startup(void *arg); /* * Command wrappers */ static int amr_query_controller(struct amr_softc *sc); static void *amr_enquiry(struct amr_softc *sc, size_t bufsize, u_int8_t cmd, u_int8_t cmdsub, u_int8_t cmdqual, int *status); static void amr_completeio(struct amr_command *ac); static int amr_support_ext_cdb(struct amr_softc *sc); /* * Command buffer allocation. */ static void amr_alloccmd_cluster(struct amr_softc *sc); static void amr_freecmd_cluster(struct amr_command_cluster *acc); /* * Command processing. */ static int amr_bio_command(struct amr_softc *sc, struct amr_command **acp); static int amr_wait_command(struct amr_command *ac); static int amr_mapcmd(struct amr_command *ac); static void amr_unmapcmd(struct amr_command *ac); static int amr_start(struct amr_command *ac); static void amr_complete(void *context, ac_qhead_t *head); static void amr_setup_sg(void *arg, bus_dma_segment_t *segs, int nsegments, int error); static void amr_setup_data(void *arg, bus_dma_segment_t *segs, int nsegments, int error); static void amr_setup_ccb(void *arg, bus_dma_segment_t *segs, int nsegments, int error); static void amr_abort_load(struct amr_command *ac); /* * Interface-specific shims */ static int amr_quartz_submit_command(struct amr_command *ac); static int amr_quartz_get_work(struct amr_softc *sc, struct amr_mailbox *mbsave); static int amr_quartz_poll_command(struct amr_command *ac); static int amr_quartz_poll_command1(struct amr_softc *sc, struct amr_command *ac); static int amr_std_submit_command(struct amr_command *ac); static int amr_std_get_work(struct amr_softc *sc, struct amr_mailbox *mbsave); static int amr_std_poll_command(struct amr_command *ac); static void amr_std_attach_mailbox(struct amr_softc *sc); #ifdef AMR_BOARD_INIT static int amr_quartz_init(struct amr_softc *sc); static int amr_std_init(struct amr_softc *sc); #endif /* * Debugging */ static void amr_describe_controller(struct amr_softc *sc); #ifdef AMR_DEBUG #if 0 static void amr_printcommand(struct amr_command *ac); #endif #endif static void amr_init_sysctl(struct amr_softc *sc); static int amr_linux_ioctl_int(struct cdev *dev, u_long cmd, caddr_t addr, int32_t flag, struct sysmsg *sm); static MALLOC_DEFINE(M_AMR, "amr", "AMR memory"); /******************************************************************************** ******************************************************************************** Inline Glue ******************************************************************************** ********************************************************************************/ /******************************************************************************** ******************************************************************************** Public Interfaces ******************************************************************************** ********************************************************************************/ /******************************************************************************** * Initialise the controller and softc. */ int amr_attach(struct amr_softc *sc) { device_t child; debug_called(1); /* * Initialise per-controller queues. */ amr_init_qhead(&sc->amr_freecmds); amr_init_qhead(&sc->amr_ready); TAILQ_INIT(&sc->amr_cmd_clusters); bioq_init(&sc->amr_bioq); debug(2, "queue init done"); /* * Configure for this controller type. */ if (AMR_IS_QUARTZ(sc)) { sc->amr_submit_command = amr_quartz_submit_command; sc->amr_get_work = amr_quartz_get_work; sc->amr_poll_command = amr_quartz_poll_command; sc->amr_poll_command1 = amr_quartz_poll_command1; } else { sc->amr_submit_command = amr_std_submit_command; sc->amr_get_work = amr_std_get_work; sc->amr_poll_command = amr_std_poll_command; amr_std_attach_mailbox(sc); } #ifdef AMR_BOARD_INIT if ((AMR_IS_QUARTZ(sc) ? amr_quartz_init(sc) : amr_std_init(sc))) return(ENXIO); #endif /* * Allocate initial commands. */ amr_alloccmd_cluster(sc); /* * Quiz controller for features and limits. */ if (amr_query_controller(sc)) return(ENXIO); debug(2, "controller query complete"); /* * preallocate the remaining commands. */ while (sc->amr_nextslot < sc->amr_maxio) amr_alloccmd_cluster(sc); /* * Setup sysctls. */ amr_init_sysctl(sc); /* * Attach our 'real' SCSI channels to CAM. */ child = device_add_child(sc->amr_dev, "amrp", -1); sc->amr_pass = child; if (child != NULL) { device_set_softc(child, sc); device_set_desc(child, "SCSI Passthrough Bus"); bus_generic_attach(sc->amr_dev); } /* * Create the control device. */ sc->amr_dev_t = make_dev(&amr_ops, device_get_unit(sc->amr_dev), UID_ROOT, GID_OPERATOR, S_IRUSR | S_IWUSR, "amr%d", device_get_unit(sc->amr_dev)); sc->amr_dev_t->si_drv1 = sc; linux_no_adapter++; if (device_get_unit(sc->amr_dev) == 0) make_dev_alias(sc->amr_dev_t, "megadev0"); /* * Schedule ourselves to bring the controller up once interrupts are * available. */ bzero(&sc->amr_ich, sizeof(struct intr_config_hook)); sc->amr_ich.ich_func = amr_startup; sc->amr_ich.ich_arg = sc; sc->amr_ich.ich_desc = "amr"; if (config_intrhook_establish(&sc->amr_ich) != 0) { device_printf(sc->amr_dev, "can't establish configuration hook\n"); return(ENOMEM); } /* * Print a little information about the controller. */ amr_describe_controller(sc); debug(2, "attach complete"); return(0); } /******************************************************************************** * Locate disk resources and attach children to them. */ static void amr_startup(void *arg) { struct amr_softc *sc = (struct amr_softc *)arg; struct amr_logdrive *dr; int i, error; debug_called(1); /* pull ourselves off the intrhook chain */ if (sc->amr_ich.ich_func) config_intrhook_disestablish(&sc->amr_ich); sc->amr_ich.ich_func = NULL; /* get up-to-date drive information */ if (amr_query_controller(sc)) { device_printf(sc->amr_dev, "can't scan controller for drives\n"); return; } /* iterate over available drives */ for (i = 0, dr = &sc->amr_drive[0]; (i < AMR_MAXLD) && (dr->al_size != 0xffffffff); i++, dr++) { /* are we already attached to this drive? */ if (dr->al_disk == 0) { /* generate geometry information */ if (dr->al_size > 0x200000) { /* extended translation? */ dr->al_heads = 255; dr->al_sectors = 63; } else { dr->al_heads = 64; dr->al_sectors = 32; } dr->al_cylinders = dr->al_size / (dr->al_heads * dr->al_sectors); dr->al_disk = device_add_child(sc->amr_dev, NULL, -1); if (dr->al_disk == 0) device_printf(sc->amr_dev, "device_add_child failed\n"); device_set_ivars(dr->al_disk, dr); } } if ((error = bus_generic_attach(sc->amr_dev)) != 0) device_printf(sc->amr_dev, "bus_generic_attach returned %d\n", error); /* mark controller back up */ sc->amr_state &= ~AMR_STATE_SHUTDOWN; /* interrupts will be enabled before we do anything more */ sc->amr_state |= AMR_STATE_INTEN; return; } static void amr_init_sysctl(struct amr_softc *sc) { struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(sc->amr_dev); struct sysctl_oid *tree = device_get_sysctl_tree(sc->amr_dev); SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "allow_volume_configure", CTLFLAG_RW, &sc->amr_allow_vol_config, 0, ""); SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "nextslot", CTLFLAG_RD, &sc->amr_nextslot, 0, ""); SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "busyslots", CTLFLAG_RD, &sc->amr_busyslots, 0, ""); SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "maxio", CTLFLAG_RD, &sc->amr_maxio, 0, ""); } /******************************************************************************* * Free resources associated with a controller instance */ void amr_free(struct amr_softc *sc) { struct amr_command_cluster *acc; /* detach from CAM */ if (sc->amr_pass != NULL) device_delete_child(sc->amr_dev, sc->amr_pass); /* throw away any command buffers */ while ((acc = TAILQ_FIRST(&sc->amr_cmd_clusters)) != NULL) { TAILQ_REMOVE(&sc->amr_cmd_clusters, acc, acc_link); amr_freecmd_cluster(acc); } /* destroy control device */ if(sc->amr_dev_t != NULL) destroy_dev(sc->amr_dev_t); dev_ops_remove_minor(&amr_ops, device_get_unit(sc->amr_dev)); #if 0 /* XXX swildner */ if (mtx_initialized(&sc->amr_hw_lock)) mtx_destroy(&sc->amr_hw_lock); if (mtx_initialized(&sc->amr_list_lock)) mtx_destroy(&sc->amr_list_lock); #endif lockuninit(&sc->amr_hw_lock); lockuninit(&sc->amr_list_lock); } /******************************************************************************* * Receive a bio structure from a child device and queue it on a particular * disk resource, then poke the disk resource to start as much work as it can. */ int amr_submit_bio(struct amr_softc *sc, struct bio *bio) { debug_called(2); lockmgr(&sc->amr_list_lock, LK_EXCLUSIVE); amr_enqueue_bio(sc, bio); amr_startio(sc); lockmgr(&sc->amr_list_lock, LK_RELEASE); return(0); } /******************************************************************************** * Accept an open operation on the control device. */ static int amr_open(struct dev_open_args *ap) { cdev_t dev = ap->a_head.a_dev; int unit = minor(dev); struct amr_softc *sc = devclass_get_softc(devclass_find("amr"), unit); debug_called(1); sc->amr_state |= AMR_STATE_OPEN; return(0); } /******************************************************************************** * Accept the last close on the control device. */ static int amr_close(struct dev_close_args *ap) { cdev_t dev = ap->a_head.a_dev; int unit = minor(dev); struct amr_softc *sc = devclass_get_softc(devclass_find("amr"), unit); debug_called(1); sc->amr_state &= ~AMR_STATE_OPEN; return (0); } /******************************************************************************** * Handle controller-specific control operations. */ static void amr_rescan_drives(struct cdev *dev) { struct amr_softc *sc = (struct amr_softc *)dev->si_drv1; int i, error = 0; sc->amr_state |= AMR_STATE_REMAP_LD; while (sc->amr_busyslots) { device_printf(sc->amr_dev, "idle controller\n"); amr_done(sc); } /* mark ourselves as in-shutdown */ sc->amr_state |= AMR_STATE_SHUTDOWN; /* flush controller */ device_printf(sc->amr_dev, "flushing cache..."); kprintf("%s\n", amr_flush(sc) ? "failed" : "done"); /* delete all our child devices */ for(i = 0 ; i < AMR_MAXLD; i++) { if(sc->amr_drive[i].al_disk != 0) { if((error = device_delete_child(sc->amr_dev, sc->amr_drive[i].al_disk)) != 0) goto shutdown_out; sc->amr_drive[i].al_disk = 0; } } shutdown_out: amr_startup(sc); } /* * Bug-for-bug compatibility with Linux! * Some apps will send commands with inlen and outlen set to 0, * even though they expect data to be transfered to them from the * card. Linux accidentally allows this by allocating a 4KB * buffer for the transfer anyways, but it then throws it away * without copying it back to the app. * * The amr(4) firmware relies on this feature. In fact, it assumes * the buffer is always a power of 2 up to a max of 64k. There is * also at least one case where it assumes a buffer less than 16k is * greater than 16k. Force a minimum buffer size of 32k and round * sizes between 32k and 64k up to 64k as a workaround. */ static unsigned long amr_ioctl_buffer_length(unsigned long len) { if (len <= 32 * 1024) return (32 * 1024); if (len <= 64 * 1024) return (64 * 1024); return (len); } static int amr_linux_ioctl_int(struct cdev *dev, u_long cmd, caddr_t addr, int32_t flag, struct sysmsg *sm) { struct amr_softc *sc = (struct amr_softc *)dev->si_drv1; struct amr_command *ac; struct amr_mailbox *mb; struct amr_linux_ioctl ali; void *dp, *temp; int error; int len, ac_flags = 0; int logical_drives_changed = 0; u_int32_t linux_version = 0x02100000; u_int8_t status; struct amr_passthrough *ap; /* 60 bytes */ error = 0; dp = NULL; ac = NULL; ap = NULL; if ((error = copyin(addr, &ali, sizeof(ali))) != 0) return (error); switch (ali.ui.fcs.opcode) { case 0x82: switch(ali.ui.fcs.subopcode) { case 'e': copyout(&linux_version, (void *)(uintptr_t)ali.data, sizeof(linux_version)); error = 0; break; case 'm': copyout(&linux_no_adapter, (void *)(uintptr_t)ali.data, sizeof(linux_no_adapter)); sm->sysmsg_result = linux_no_adapter; error = 0; break; default: kprintf("Unknown subopcode\n"); error = ENOIOCTL; break; } break; case 0x80: case 0x81: if (ali.ui.fcs.opcode == 0x80) len = max(ali.outlen, ali.inlen); else len = ali.ui.fcs.length; mb = (void *)&ali.mbox[0]; if ((ali.mbox[0] == FC_DEL_LOGDRV && ali.mbox[2] == OP_DEL_LOGDRV) || /* delete */ (ali.mbox[0] == AMR_CMD_CONFIG && ali.mbox[2] == 0x0d)) { /* create */ if (sc->amr_allow_vol_config == 0) { error = EPERM; break; } logical_drives_changed = 1; } if (ali.mbox[0] == AMR_CMD_PASS) { lockmgr(&sc->amr_list_lock, LK_EXCLUSIVE); while ((ac = amr_alloccmd(sc)) == NULL) lksleep(sc, &sc->amr_list_lock, 0, "amrioc", hz); lockmgr(&sc->amr_list_lock, LK_RELEASE); ap = &ac->ac_ccb->ccb_pthru; error = copyin((void *)(uintptr_t)mb->mb_physaddr, ap, sizeof(struct amr_passthrough)); if (error) break; if (ap->ap_data_transfer_length) dp = kmalloc(ap->ap_data_transfer_length, M_AMR, M_WAITOK | M_ZERO); if (ali.inlen) { error = copyin((void *)(uintptr_t)ap->ap_data_transfer_address, dp, ap->ap_data_transfer_length); if (error) break; } ac_flags = AMR_CMD_DATAIN|AMR_CMD_DATAOUT|AMR_CMD_CCB; bzero(&ac->ac_mailbox, sizeof(ac->ac_mailbox)); ac->ac_mailbox.mb_command = AMR_CMD_PASS; ac->ac_flags = ac_flags; ac->ac_data = dp; ac->ac_length = ap->ap_data_transfer_length; temp = (void *)(uintptr_t)ap->ap_data_transfer_address; lockmgr(&sc->amr_list_lock, LK_EXCLUSIVE); error = amr_wait_command(ac); lockmgr(&sc->amr_list_lock, LK_RELEASE); if (error) break; status = ac->ac_status; error = copyout(&status, &((struct amr_passthrough *)(uintptr_t)mb->mb_physaddr)->ap_scsi_status, sizeof(status)); if (error) break; if (ali.outlen) { error = copyout(dp, temp, ap->ap_data_transfer_length); if (error) break; } error = copyout(ap->ap_request_sense_area, ((struct amr_passthrough *)(uintptr_t)mb->mb_physaddr)->ap_request_sense_area, ap->ap_request_sense_length); if (error) break; error = 0; break; } else if (ali.mbox[0] == AMR_CMD_PASS_64) { kprintf("No AMR_CMD_PASS_64\n"); error = ENOIOCTL; break; } else if (ali.mbox[0] == AMR_CMD_EXTPASS) { kprintf("No AMR_CMD_EXTPASS\n"); error = ENOIOCTL; break; } else { len = amr_ioctl_buffer_length(imax(ali.inlen, ali.outlen)); dp = kmalloc(len, M_AMR, M_WAITOK | M_ZERO); if (ali.inlen) { error = copyin((void *)(uintptr_t)mb->mb_physaddr, dp, len); if (error) break; } lockmgr(&sc->amr_list_lock, LK_EXCLUSIVE); while ((ac = amr_alloccmd(sc)) == NULL) lksleep(sc, &sc->amr_list_lock, 0, "amrioc", hz); ac_flags = AMR_CMD_DATAIN|AMR_CMD_DATAOUT; bzero(&ac->ac_mailbox, sizeof(ac->ac_mailbox)); bcopy(&ali.mbox[0], &ac->ac_mailbox, sizeof(ali.mbox)); ac->ac_length = len; ac->ac_data = dp; ac->ac_flags = ac_flags; error = amr_wait_command(ac); lockmgr(&sc->amr_list_lock, LK_RELEASE); if (error) break; status = ac->ac_status; error = copyout(&status, &((struct amr_mailbox *)&((struct amr_linux_ioctl *)addr)->mbox[0])->mb_status, sizeof(status)); if (ali.outlen) { error = copyout(dp, (void *)(uintptr_t)mb->mb_physaddr, ali.outlen); if (error) break; } error = 0; if (logical_drives_changed) amr_rescan_drives(dev); break; } break; default: debug(1, "unknown linux ioctl 0x%lx", cmd); kprintf("unknown linux ioctl 0x%lx\n", cmd); error = ENOIOCTL; break; } /* * At this point, we know that there is a lock held and that these * objects have been allocated. */ lockmgr(&sc->amr_list_lock, LK_EXCLUSIVE); if (ac != NULL) amr_releasecmd(ac); lockmgr(&sc->amr_list_lock, LK_RELEASE); if (dp != NULL) kfree(dp, M_AMR); return(error); } static int amr_ioctl(struct dev_ioctl_args *ap) { cdev_t dev = ap->a_head.a_dev; caddr_t addr = ap->a_data; u_long cmd = ap->a_cmd; struct amr_softc *sc = (struct amr_softc *)dev->si_drv1; union { void *_p; struct amr_user_ioctl *au; #ifdef AMR_IO_COMMAND32 struct amr_user_ioctl32 *au32; #endif int *result; } arg; struct amr_command *ac; struct amr_mailbox_ioctl *mbi; void *dp, *au_buffer; unsigned long au_length, real_length; unsigned char *au_cmd; int *au_statusp; int error; struct amr_passthrough *_ap; /* 60 bytes */ int logical_drives_changed = 0; debug_called(1); arg._p = (void *)addr; error = 0; dp = NULL; ac = NULL; _ap = NULL; switch(cmd) { case AMR_IO_VERSION: debug(1, "AMR_IO_VERSION"); *arg.result = AMR_IO_VERSION_NUMBER; return(0); #ifdef AMR_IO_COMMAND32 /* * Accept ioctl-s from 32-bit binaries on non-32-bit * platforms, such as AMD. LSI's MEGAMGR utility is * the only example known today... -mi */ case AMR_IO_COMMAND32: debug(1, "AMR_IO_COMMAND32 0x%x", arg.au32->au_cmd[0]); au_cmd = arg.au32->au_cmd; au_buffer = (void *)(u_int64_t)arg.au32->au_buffer; au_length = arg.au32->au_length; au_statusp = &arg.au32->au_status; break; #endif case AMR_IO_COMMAND: debug(1, "AMR_IO_COMMAND 0x%x", arg.au->au_cmd[0]); au_cmd = arg.au->au_cmd; au_buffer = (void *)arg.au->au_buffer; au_length = arg.au->au_length; au_statusp = &arg.au->au_status; break; case 0xc0046d00: case 0xc06e6d00: /* Linux emulation */ { devclass_t devclass; struct amr_linux_ioctl ali; int adapter, error; devclass = devclass_find("amr"); if (devclass == NULL) return (ENOENT); error = copyin(addr, &ali, sizeof(ali)); if (error) return (error); if (ali.ui.fcs.opcode == 0x82) adapter = 0; else adapter = (ali.ui.fcs.adapno) ^ 'm' << 8; sc = devclass_get_softc(devclass, adapter); if (sc == NULL) return (ENOENT); return (amr_linux_ioctl_int(sc->amr_dev_t, cmd, addr, 0, ap->a_sysmsg)); } default: debug(1, "unknown ioctl 0x%lx", cmd); return(ENOIOCTL); } if ((au_cmd[0] == FC_DEL_LOGDRV && au_cmd[1] == OP_DEL_LOGDRV) || /* delete */ (au_cmd[0] == AMR_CMD_CONFIG && au_cmd[1] == 0x0d)) { /* create */ if (sc->amr_allow_vol_config == 0) { error = EPERM; goto out; } logical_drives_changed = 1; } /* handle inbound data buffer */ real_length = amr_ioctl_buffer_length(au_length); if (au_length != 0 && au_cmd[0] != 0x06) { if ((dp = kmalloc(real_length, M_AMR, M_WAITOK|M_ZERO)) == NULL) { error = ENOMEM; goto out; } if ((error = copyin(au_buffer, dp, au_length)) != 0) { kfree(dp, M_AMR); return (error); } debug(2, "copyin %ld bytes from %p -> %p", au_length, au_buffer, dp); } /* Allocate this now before the mutex gets held */ lockmgr(&sc->amr_list_lock, LK_EXCLUSIVE); while ((ac = amr_alloccmd(sc)) == NULL) lksleep(sc, &sc->amr_list_lock, 0, "amrioc", hz); /* handle SCSI passthrough command */ if (au_cmd[0] == AMR_CMD_PASS) { int len; _ap = &ac->ac_ccb->ccb_pthru; bzero(_ap, sizeof(struct amr_passthrough)); /* copy cdb */ len = au_cmd[2]; _ap->ap_cdb_length = len; bcopy(au_cmd + 3, _ap->ap_cdb, len); /* build passthrough */ _ap->ap_timeout = au_cmd[len + 3] & 0x07; _ap->ap_ars = (au_cmd[len + 3] & 0x08) ? 1 : 0; _ap->ap_islogical = (au_cmd[len + 3] & 0x80) ? 1 : 0; _ap->ap_logical_drive_no = au_cmd[len + 4]; _ap->ap_channel = au_cmd[len + 5]; _ap->ap_scsi_id = au_cmd[len + 6]; _ap->ap_request_sense_length = 14; _ap->ap_data_transfer_length = au_length; /* XXX what about the request-sense area? does the caller want it? */ /* build command */ ac->ac_mailbox.mb_command = AMR_CMD_PASS; ac->ac_flags = AMR_CMD_CCB; } else { /* direct command to controller */ mbi = (struct amr_mailbox_ioctl *)&ac->ac_mailbox; /* copy pertinent mailbox items */ mbi->mb_command = au_cmd[0]; mbi->mb_channel = au_cmd[1]; mbi->mb_param = au_cmd[2]; mbi->mb_pad[0] = au_cmd[3]; mbi->mb_drive = au_cmd[4]; ac->ac_flags = 0; } /* build the command */ ac->ac_data = dp; ac->ac_length = real_length; ac->ac_flags |= AMR_CMD_DATAIN|AMR_CMD_DATAOUT; /* run the command */ error = amr_wait_command(ac); lockmgr(&sc->amr_list_lock, LK_RELEASE); if (error) goto out; /* copy out data and set status */ if (au_length != 0) { error = copyout(dp, au_buffer, au_length); } debug(2, "copyout %ld bytes from %p -> %p", au_length, dp, au_buffer); if (dp != NULL) debug(2, "%p status 0x%x", dp, ac->ac_status); *au_statusp = ac->ac_status; out: /* * At this point, we know that there is a lock held and that these * objects have been allocated. */ lockmgr(&sc->amr_list_lock, LK_EXCLUSIVE); if (ac != NULL) amr_releasecmd(ac); lockmgr(&sc->amr_list_lock, LK_RELEASE); if (dp != NULL) kfree(dp, M_AMR); if (logical_drives_changed) amr_rescan_drives(dev); return(error); } /******************************************************************************** ******************************************************************************** Command Wrappers ******************************************************************************** ********************************************************************************/ /******************************************************************************** * Interrogate the controller for the operational parameters we require. */ static int amr_query_controller(struct amr_softc *sc) { struct amr_enquiry3 *aex; struct amr_prodinfo *ap; struct amr_enquiry *ae; int ldrv; int status; /* * Greater than 10 byte cdb support */ sc->support_ext_cdb = amr_support_ext_cdb(sc); if(sc->support_ext_cdb) { debug(2,"supports extended CDBs."); } /* * Try to issue an ENQUIRY3 command */ if ((aex = amr_enquiry(sc, 2048, AMR_CMD_CONFIG, AMR_CONFIG_ENQ3, AMR_CONFIG_ENQ3_SOLICITED_FULL, &status)) != NULL) { /* * Fetch current state of logical drives. */ for (ldrv = 0; ldrv < aex->ae_numldrives; ldrv++) { sc->amr_drive[ldrv].al_size = aex->ae_drivesize[ldrv]; sc->amr_drive[ldrv].al_state = aex->ae_drivestate[ldrv]; sc->amr_drive[ldrv].al_properties = aex->ae_driveprop[ldrv]; debug(2, " drive %d: %d state %x properties %x", ldrv, sc->amr_drive[ldrv].al_size, sc->amr_drive[ldrv].al_state, sc->amr_drive[ldrv].al_properties); } kfree(aex, M_AMR); /* * Get product info for channel count. */ if ((ap = amr_enquiry(sc, 2048, AMR_CMD_CONFIG, AMR_CONFIG_PRODUCT_INFO, 0, &status)) == NULL) { device_printf(sc->amr_dev, "can't obtain product data from controller\n"); return(1); } sc->amr_maxdrives = 40; sc->amr_maxchan = ap->ap_nschan; sc->amr_maxio = ap->ap_maxio; sc->amr_type |= AMR_TYPE_40LD; kfree(ap, M_AMR); ap = amr_enquiry(sc, 0, FC_DEL_LOGDRV, OP_SUP_DEL_LOGDRV, 0, &status); if (ap != NULL) kfree(ap, M_AMR); if (!status) { sc->amr_ld_del_supported = 1; device_printf(sc->amr_dev, "delete logical drives supported by controller\n"); } } else { /* failed, try the 8LD ENQUIRY commands */ if ((ae = (struct amr_enquiry *)amr_enquiry(sc, 2048, AMR_CMD_EXT_ENQUIRY2, 0, 0, &status)) == NULL) { if ((ae = (struct amr_enquiry *)amr_enquiry(sc, 2048, AMR_CMD_ENQUIRY, 0, 0, &status)) == NULL) { device_printf(sc->amr_dev, "can't obtain configuration data from controller\n"); return(1); } ae->ae_signature = 0; } /* * Fetch current state of logical drives. */ for (ldrv = 0; ldrv < ae->ae_ldrv.al_numdrives; ldrv++) { sc->amr_drive[ldrv].al_size = ae->ae_ldrv.al_size[ldrv]; sc->amr_drive[ldrv].al_state = ae->ae_ldrv.al_state[ldrv]; sc->amr_drive[ldrv].al_properties = ae->ae_ldrv.al_properties[ldrv]; debug(2, " drive %d: %d state %x properties %x\n", ldrv, sc->amr_drive[ldrv].al_size, sc->amr_drive[ldrv].al_state, sc->amr_drive[ldrv].al_properties); } sc->amr_maxdrives = 8; sc->amr_maxchan = ae->ae_adapter.aa_channels; sc->amr_maxio = ae->ae_adapter.aa_maxio; kfree(ae, M_AMR); } /* * Mark remaining drives as unused. */ for (; ldrv < AMR_MAXLD; ldrv++) sc->amr_drive[ldrv].al_size = 0xffffffff; /* * Cap the maximum number of outstanding I/Os. AMI's Linux driver doesn't trust * the controller's reported value, and lockups have been seen when we do. */ sc->amr_maxio = imin(sc->amr_maxio, AMR_LIMITCMD); return(0); } /******************************************************************************** * Run a generic enquiry-style command. */ static void * amr_enquiry(struct amr_softc *sc, size_t bufsize, u_int8_t cmd, u_int8_t cmdsub, u_int8_t cmdqual, int *status) { struct amr_command *ac; void *result; u_int8_t *mbox; int error; debug_called(1); *status = 0; /* avoid gcc warnings */ error = 1; result = NULL; /* get ourselves a command buffer */ lockmgr(&sc->amr_list_lock, LK_EXCLUSIVE); ac = amr_alloccmd(sc); lockmgr(&sc->amr_list_lock, LK_RELEASE); if (ac == NULL) goto out; /* allocate the response structure */ if ((result = kmalloc(bufsize, M_AMR, M_ZERO|M_NOWAIT)) == NULL) goto out; /* set command flags */ ac->ac_flags |= AMR_CMD_PRIORITY | AMR_CMD_DATAIN; /* point the command at our data */ ac->ac_data = result; ac->ac_length = bufsize; /* build the command proper */ mbox = (u_int8_t *)&ac->ac_mailbox; /* XXX want a real structure for this? */ mbox[0] = cmd; mbox[2] = cmdsub; mbox[3] = cmdqual; *status = 0; /* can't assume that interrupts are going to work here, so play it safe */ if (sc->amr_poll_command(ac)) goto out; error = ac->ac_status; *status = ac->ac_status; out: lockmgr(&sc->amr_list_lock, LK_EXCLUSIVE); if (ac != NULL) amr_releasecmd(ac); lockmgr(&sc->amr_list_lock, LK_RELEASE); if ((error != 0) && (result != NULL)) { kfree(result, M_AMR); result = NULL; } return(result); } /******************************************************************************** * Flush the controller's internal cache, return status. */ int amr_flush(struct amr_softc *sc) { struct amr_command *ac; int error; /* get ourselves a command buffer */ error = 1; lockmgr(&sc->amr_list_lock, LK_EXCLUSIVE); ac = amr_alloccmd(sc); lockmgr(&sc->amr_list_lock, LK_RELEASE); if (ac == NULL) goto out; /* set command flags */ ac->ac_flags |= AMR_CMD_PRIORITY | AMR_CMD_DATAOUT; /* build the command proper */ ac->ac_mailbox.mb_command = AMR_CMD_FLUSH; /* we have to poll, as the system may be going down or otherwise damaged */ if (sc->amr_poll_command(ac)) goto out; error = ac->ac_status; out: lockmgr(&sc->amr_list_lock, LK_EXCLUSIVE); if (ac != NULL) amr_releasecmd(ac); lockmgr(&sc->amr_list_lock, LK_RELEASE); return(error); } /******************************************************************************** * Detect extented cdb >> greater than 10 byte cdb support * returns '1' means this support exist * returns '0' means this support doesn't exist */ static int amr_support_ext_cdb(struct amr_softc *sc) { struct amr_command *ac; u_int8_t *mbox; int error; /* get ourselves a command buffer */ error = 0; lockmgr(&sc->amr_list_lock, LK_EXCLUSIVE); ac = amr_alloccmd(sc); lockmgr(&sc->amr_list_lock, LK_RELEASE); if (ac == NULL) goto out; /* set command flags */ ac->ac_flags |= AMR_CMD_PRIORITY | AMR_CMD_DATAOUT; /* build the command proper */ mbox = (u_int8_t *)&ac->ac_mailbox; /* XXX want a real structure for this? */ mbox[0] = 0xA4; mbox[2] = 0x16; /* we have to poll, as the system may be going down or otherwise damaged */ if (sc->amr_poll_command(ac)) goto out; if( ac->ac_status == AMR_STATUS_SUCCESS ) { error = 1; } out: lockmgr(&sc->amr_list_lock, LK_EXCLUSIVE); if (ac != NULL) amr_releasecmd(ac); lockmgr(&sc->amr_list_lock, LK_RELEASE); return(error); } /******************************************************************************** * Try to find I/O work for the controller from one or more of the work queues. * * We make the assumption that if the controller is not ready to take a command * at some given time, it will generate an interrupt at some later time when * it is. */ void amr_startio(struct amr_softc *sc) { struct amr_command *ac; /* spin until something prevents us from doing any work */ for (;;) { /* Don't bother to queue commands no bounce buffers are available. */ if (sc->amr_state & AMR_STATE_QUEUE_FRZN) break; /* try to get a ready command */ ac = amr_dequeue_ready(sc); /* if that failed, build a command from a bio */ if (ac == NULL) (void)amr_bio_command(sc, &ac); /* if that failed, build a command from a ccb */ if ((ac == NULL) && (sc->amr_cam_command != NULL)) sc->amr_cam_command(sc, &ac); /* if we don't have anything to do, give up */ if (ac == NULL) break; /* try to give the command to the controller; if this fails save it for later and give up */ if (amr_start(ac)) { debug(2, "controller busy, command deferred"); amr_requeue_ready(ac); /* XXX schedule retry very soon? */ break; } } } /******************************************************************************** * Handle completion of an I/O command. */ static void amr_completeio(struct amr_command *ac) { struct amr_softc *sc = ac->ac_sc; static struct timeval lastfail; static int curfail; struct buf *bp = ac->ac_bio->bio_buf; if (ac->ac_status != AMR_STATUS_SUCCESS) { /* could be more verbose here? */ bp->b_error = EIO; bp->b_flags |= B_ERROR; if (ppsratecheck(&lastfail, &curfail, 1)) device_printf(sc->amr_dev, "I/O error - 0x%x\n", ac->ac_status); /* amr_printcommand(ac);*/ } amrd_intr(ac->ac_bio); lockmgr(&ac->ac_sc->amr_list_lock, LK_EXCLUSIVE); amr_releasecmd(ac); lockmgr(&ac->ac_sc->amr_list_lock, LK_RELEASE); } /******************************************************************************** ******************************************************************************** Command Processing ******************************************************************************** ********************************************************************************/ /******************************************************************************** * Convert a bio off the top of the bio queue into a command. */ static int amr_bio_command(struct amr_softc *sc, struct amr_command **acp) { struct amr_command *ac; struct amrd_softc *amrd; struct bio *bio; struct buf *bp; int error; int blkcount; int driveno; int cmd; ac = NULL; error = 0; /* get a command */ if ((ac = amr_alloccmd(sc)) == NULL) return (ENOMEM); /* get a bio to work on */ if ((bio = amr_dequeue_bio(sc)) == NULL) { amr_releasecmd(ac); return (0); } /* connect the bio to the command */ bp = bio->bio_buf; ac->ac_complete = amr_completeio; ac->ac_bio = bio; ac->ac_data = bp->b_data; ac->ac_length = bp->b_bcount; cmd = 0; switch (bp->b_cmd) { case BUF_CMD_READ: ac->ac_flags |= AMR_CMD_DATAIN; if (AMR_IS_SG64(sc)) { cmd = AMR_CMD_LREAD64; ac->ac_flags |= AMR_CMD_SG64; } else cmd = AMR_CMD_LREAD; break; case BUF_CMD_WRITE: ac->ac_flags |= AMR_CMD_DATAOUT; if (AMR_IS_SG64(sc)) { cmd = AMR_CMD_LWRITE64; ac->ac_flags |= AMR_CMD_SG64; } else cmd = AMR_CMD_LWRITE; break; case BUF_CMD_FLUSH: ac->ac_flags |= AMR_CMD_PRIORITY | AMR_CMD_DATAOUT; cmd = AMR_CMD_FLUSH; break; default: panic("Invalid bio command"); } amrd = (struct amrd_softc *)bio->bio_driver_info; driveno = amrd->amrd_drive - sc->amr_drive; blkcount = (bp->b_bcount + AMR_BLKSIZE - 1) / AMR_BLKSIZE; ac->ac_mailbox.mb_command = cmd; if (bp->b_cmd & (BUF_CMD_READ|BUF_CMD_WRITE)) { ac->ac_mailbox.mb_blkcount = blkcount; ac->ac_mailbox.mb_lba = bio->bio_offset / AMR_BLKSIZE; if (((bio->bio_offset / AMR_BLKSIZE) + blkcount) > sc->amr_drive[driveno].al_size) { device_printf(sc->amr_dev, "I/O beyond end of unit (%lld,%d > %lu)\n", (long long)(bio->bio_offset / AMR_BLKSIZE), blkcount, (u_long)sc->amr_drive[driveno].al_size); } } ac->ac_mailbox.mb_drive = driveno; if (sc->amr_state & AMR_STATE_REMAP_LD) ac->ac_mailbox.mb_drive |= 0x80; /* we fill in the s/g related data when the command is mapped */ *acp = ac; return(error); } /******************************************************************************** * Take a command, submit it to the controller and sleep until it completes * or fails. Interrupts must be enabled, returns nonzero on error. */ static int amr_wait_command(struct amr_command *ac) { int error = 0; struct amr_softc *sc = ac->ac_sc; debug_called(1); ac->ac_complete = NULL; ac->ac_flags |= AMR_CMD_SLEEP; if ((error = amr_start(ac)) != 0) { return(error); } while ((ac->ac_flags & AMR_CMD_BUSY) && (error != EWOULDBLOCK)) { error = lksleep(ac,&sc->amr_list_lock, 0, "amrwcmd", 0); } return(error); } /******************************************************************************** * Take a command, submit it to the controller and busy-wait for it to return. * Returns nonzero on error. Can be safely called with interrupts enabled. */ static int amr_std_poll_command(struct amr_command *ac) { struct amr_softc *sc = ac->ac_sc; int error, count; debug_called(2); ac->ac_complete = NULL; if ((error = amr_start(ac)) != 0) return(error); count = 0; do { /* * Poll for completion, although the interrupt handler may beat us to it. * Note that the timeout here is somewhat arbitrary. */ amr_done(sc); DELAY(1000); } while ((ac->ac_flags & AMR_CMD_BUSY) && (count++ < 1000)); if (!(ac->ac_flags & AMR_CMD_BUSY)) { error = 0; } else { /* XXX the slot is now marked permanently busy */ error = EIO; device_printf(sc->amr_dev, "polled command timeout\n"); } return(error); } static void amr_setup_polled_dmamap(void *arg, bus_dma_segment_t *segs, int nsegs, int err) { struct amr_command *ac = arg; struct amr_softc *sc = ac->ac_sc; int mb_channel; if (err) { device_printf(sc->amr_dev, "error %d in %s", err, __func__); ac->ac_status = AMR_STATUS_ABORTED; return; } amr_setup_sg(arg, segs, nsegs, err); /* for AMR_CMD_CONFIG Read/Write the s/g count goes elsewhere */ mb_channel = ((struct amr_mailbox_ioctl *)&ac->ac_mailbox)->mb_channel; if (ac->ac_mailbox.mb_command == AMR_CMD_CONFIG && ((mb_channel == AMR_CONFIG_READ_NVRAM_CONFIG) || (mb_channel == AMR_CONFIG_WRITE_NVRAM_CONFIG))) ((struct amr_mailbox_ioctl *)&ac->ac_mailbox)->mb_param = ac->ac_nsegments; ac->ac_mailbox.mb_nsgelem = ac->ac_nsegments; ac->ac_mailbox.mb_physaddr = ac->ac_mb_physaddr; if (AC_IS_SG64(ac)) { ac->ac_sg64_hi = 0; ac->ac_sg64_lo = ac->ac_sgbusaddr; } sc->amr_poll_command1(sc, ac); } /******************************************************************************** * Take a command, submit it to the controller and busy-wait for it to return. * Returns nonzero on error. Can be safely called with interrupts enabled. */ static int amr_quartz_poll_command(struct amr_command *ac) { struct amr_softc *sc = ac->ac_sc; int error; debug_called(2); error = 0; if (AC_IS_SG64(ac)) { ac->ac_tag = sc->amr_buffer64_dmat; ac->ac_datamap = ac->ac_dma64map; } else { ac->ac_tag = sc->amr_buffer_dmat; ac->ac_datamap = ac->ac_dmamap; } /* now we have a slot, we can map the command (unmapped in amr_complete) */ if (ac->ac_data != NULL && ac->ac_length != 0) { if (bus_dmamap_load(ac->ac_tag, ac->ac_datamap, ac->ac_data, ac->ac_length, amr_setup_polled_dmamap, ac, BUS_DMA_NOWAIT) != 0) { error = 1; } } else { error = amr_quartz_poll_command1(sc, ac); } return (error); } static int amr_quartz_poll_command1(struct amr_softc *sc, struct amr_command *ac) { int count, error; lockmgr(&sc->amr_hw_lock, LK_EXCLUSIVE); if ((sc->amr_state & AMR_STATE_INTEN) == 0) { count=0; while (sc->amr_busyslots) { lksleep(sc, &sc->amr_hw_lock, PCATCH, "amrpoll", hz); if(count++>10) { break; } } if(sc->amr_busyslots) { device_printf(sc->amr_dev, "adapter is busy\n"); lockmgr(&sc->amr_hw_lock, LK_RELEASE); if (ac->ac_data != NULL) { bus_dmamap_unload(ac->ac_tag, ac->ac_datamap); } ac->ac_status=0; return(1); } } bcopy(&ac->ac_mailbox, (void *)(uintptr_t)(volatile void *)sc->amr_mailbox, AMR_MBOX_CMDSIZE); /* clear the poll/ack fields in the mailbox */ sc->amr_mailbox->mb_ident = 0xFE; sc->amr_mailbox->mb_nstatus = 0xFF; sc->amr_mailbox->mb_status = 0xFF; sc->amr_mailbox->mb_poll = 0; sc->amr_mailbox->mb_ack = 0; sc->amr_mailbox->mb_busy = 1; AMR_QPUT_IDB(sc, sc->amr_mailboxphys | AMR_QIDB_SUBMIT); while(sc->amr_mailbox->mb_nstatus == 0xFF) DELAY(1); while(sc->amr_mailbox->mb_status == 0xFF) DELAY(1); ac->ac_status=sc->amr_mailbox->mb_status; error = (ac->ac_status !=AMR_STATUS_SUCCESS) ? 1:0; while(sc->amr_mailbox->mb_poll != 0x77) DELAY(1); sc->amr_mailbox->mb_poll = 0; sc->amr_mailbox->mb_ack = 0x77; /* acknowledge that we have the commands */ AMR_QPUT_IDB(sc, sc->amr_mailboxphys | AMR_QIDB_ACK); while(AMR_QGET_IDB(sc) & AMR_QIDB_ACK) DELAY(1); lockmgr(&sc->amr_hw_lock, LK_RELEASE); /* unmap the command's data buffer */ if (ac->ac_flags & AMR_CMD_DATAIN) { bus_dmamap_sync(ac->ac_tag, ac->ac_datamap, BUS_DMASYNC_POSTREAD); } if (ac->ac_flags & AMR_CMD_DATAOUT) { bus_dmamap_sync(ac->ac_tag, ac->ac_datamap, BUS_DMASYNC_POSTWRITE); } bus_dmamap_unload(ac->ac_tag, ac->ac_datamap); return(error); } static __inline int amr_freeslot(struct amr_command *ac) { struct amr_softc *sc = ac->ac_sc; int slot; debug_called(3); slot = ac->ac_slot; if (sc->amr_busycmd[slot] == NULL) panic("amr: slot %d not busy?", slot); sc->amr_busycmd[slot] = NULL; atomic_subtract_int(&sc->amr_busyslots, 1); return (0); } /******************************************************************************** * Map/unmap (ac)'s data in the controller's addressable space as required. * * These functions may be safely called multiple times on a given command. */ static void amr_setup_sg(void *arg, bus_dma_segment_t *segs, int nsegments, int error) { struct amr_command *ac = (struct amr_command *)arg; struct amr_sgentry *sg; struct amr_sg64entry *sg64; int flags, i; debug_called(3); /* get base address of s/g table */ sg = ac->ac_sg.sg32; sg64 = ac->ac_sg.sg64; if (AC_IS_SG64(ac)) { ac->ac_nsegments = nsegments; ac->ac_mb_physaddr = 0xffffffff; for (i = 0; i < nsegments; i++, sg64++) { sg64->sg_addr = segs[i].ds_addr; sg64->sg_count = segs[i].ds_len; } } else { /* decide whether we need to populate the s/g table */ if (nsegments < 2) { ac->ac_nsegments = 0; ac->ac_mb_physaddr = segs[0].ds_addr; } else { ac->ac_nsegments = nsegments; ac->ac_mb_physaddr = ac->ac_sgbusaddr; for (i = 0; i < nsegments; i++, sg++) { sg->sg_addr = segs[i].ds_addr; sg->sg_count = segs[i].ds_len; } } } flags = 0; if (ac->ac_flags & AMR_CMD_DATAIN) flags |= BUS_DMASYNC_PREREAD; if (ac->ac_flags & AMR_CMD_DATAOUT) flags |= BUS_DMASYNC_PREWRITE; bus_dmamap_sync(ac->ac_tag, ac->ac_datamap, flags); ac->ac_flags |= AMR_CMD_MAPPED; } static void amr_setup_data(void *arg, bus_dma_segment_t *segs, int nsegs, int err) { struct amr_command *ac = arg; struct amr_softc *sc = ac->ac_sc; int mb_channel; if (err) { device_printf(sc->amr_dev, "error %d in %s", err, __func__); amr_abort_load(ac); return; } amr_setup_sg(arg, segs, nsegs, err); /* for AMR_CMD_CONFIG Read/Write the s/g count goes elsewhere */ mb_channel = ((struct amr_mailbox_ioctl *)&ac->ac_mailbox)->mb_channel; if (ac->ac_mailbox.mb_command == AMR_CMD_CONFIG && ((mb_channel == AMR_CONFIG_READ_NVRAM_CONFIG) || (mb_channel == AMR_CONFIG_WRITE_NVRAM_CONFIG))) ((struct amr_mailbox_ioctl *)&ac->ac_mailbox)->mb_param = ac->ac_nsegments; ac->ac_mailbox.mb_nsgelem = ac->ac_nsegments; ac->ac_mailbox.mb_physaddr = ac->ac_mb_physaddr; if (AC_IS_SG64(ac)) { ac->ac_sg64_hi = 0; ac->ac_sg64_lo = ac->ac_sgbusaddr; } if (sc->amr_submit_command(ac) == EBUSY) { amr_freeslot(ac); amr_requeue_ready(ac); } } static void amr_setup_ccb(void *arg, bus_dma_segment_t *segs, int nsegs, int err) { struct amr_command *ac = arg; struct amr_softc *sc = ac->ac_sc; struct amr_passthrough *ap = &ac->ac_ccb->ccb_pthru; struct amr_ext_passthrough *aep = &ac->ac_ccb->ccb_epthru; if (err) { device_printf(sc->amr_dev, "error %d in %s", err, __func__); amr_abort_load(ac); return; } /* Set up the mailbox portion of the command to point at the ccb */ ac->ac_mailbox.mb_nsgelem = 0; ac->ac_mailbox.mb_physaddr = ac->ac_ccb_busaddr; amr_setup_sg(arg, segs, nsegs, err); switch (ac->ac_mailbox.mb_command) { case AMR_CMD_EXTPASS: aep->ap_no_sg_elements = ac->ac_nsegments; aep->ap_data_transfer_address = ac->ac_mb_physaddr; break; case AMR_CMD_PASS: ap->ap_no_sg_elements = ac->ac_nsegments; ap->ap_data_transfer_address = ac->ac_mb_physaddr; break; default: panic("Unknown ccb command"); } if (sc->amr_submit_command(ac) == EBUSY) { amr_freeslot(ac); amr_requeue_ready(ac); } } static int amr_mapcmd(struct amr_command *ac) { bus_dmamap_callback_t *cb; struct amr_softc *sc = ac->ac_sc; debug_called(3); if (AC_IS_SG64(ac)) { ac->ac_tag = sc->amr_buffer64_dmat; ac->ac_datamap = ac->ac_dma64map; } else { ac->ac_tag = sc->amr_buffer_dmat; ac->ac_datamap = ac->ac_dmamap; } if (ac->ac_flags & AMR_CMD_CCB) cb = amr_setup_ccb; else cb = amr_setup_data; /* if the command involves data at all, and hasn't been mapped */ if ((ac->ac_flags & AMR_CMD_MAPPED) == 0 && (ac->ac_data != NULL)) { /* map the data buffers into bus space and build the s/g list */ if (bus_dmamap_load(ac->ac_tag, ac->ac_datamap, ac->ac_data, ac->ac_length, cb, ac, 0) == EINPROGRESS) { sc->amr_state |= AMR_STATE_QUEUE_FRZN; } } else { if (sc->amr_submit_command(ac) == EBUSY) { amr_freeslot(ac); amr_requeue_ready(ac); } } return (0); } static void amr_unmapcmd(struct amr_command *ac) { int flag; debug_called(3); /* if the command involved data at all and was mapped */ if (ac->ac_flags & AMR_CMD_MAPPED) { if (ac->ac_data != NULL) { flag = 0; if (ac->ac_flags & AMR_CMD_DATAIN) flag |= BUS_DMASYNC_POSTREAD; if (ac->ac_flags & AMR_CMD_DATAOUT) flag |= BUS_DMASYNC_POSTWRITE; bus_dmamap_sync(ac->ac_tag, ac->ac_datamap, flag); bus_dmamap_unload(ac->ac_tag, ac->ac_datamap); } ac->ac_flags &= ~AMR_CMD_MAPPED; } } static void amr_abort_load(struct amr_command *ac) { ac_qhead_t head; struct amr_softc *sc = ac->ac_sc; KKASSERT(lockstatus(&sc->amr_list_lock, curthread) != 0); ac->ac_status = AMR_STATUS_ABORTED; amr_init_qhead(&head); amr_enqueue_completed(ac, &head); lockmgr(&sc->amr_list_lock, LK_RELEASE); amr_complete(sc, &head); lockmgr(&sc->amr_list_lock, LK_EXCLUSIVE); } /******************************************************************************** * Take a command and give it to the controller, returns 0 if successful, or * EBUSY if the command should be retried later. */ static int amr_start(struct amr_command *ac) { struct amr_softc *sc; int error = 0; int slot; debug_called(3); /* mark command as busy so that polling consumer can tell */ sc = ac->ac_sc; ac->ac_flags |= AMR_CMD_BUSY; /* get a command slot (freed in amr_done) */ slot = ac->ac_slot; if (sc->amr_busycmd[slot] != NULL) panic("amr: slot %d busy?", slot); sc->amr_busycmd[slot] = ac; atomic_add_int(&sc->amr_busyslots, 1); /* Now we have a slot, we can map the command (unmapped in amr_complete). */ if ((error = amr_mapcmd(ac)) == ENOMEM) { /* * Memroy resources are short, so free the slot and let this be tried * later. */ amr_freeslot(ac); } return (error); } /******************************************************************************** * Extract one or more completed commands from the controller (sc) * * Returns nonzero if any commands on the work queue were marked as completed. */ int amr_done(struct amr_softc *sc) { ac_qhead_t head; struct amr_command *ac; struct amr_mailbox mbox; int i, idx, result; debug_called(3); /* See if there's anything for us to do */ result = 0; amr_init_qhead(&head); /* loop collecting completed commands */ for (;;) { /* poll for a completed command's identifier and status */ if (sc->amr_get_work(sc, &mbox)) { result = 1; /* iterate over completed commands in this result */ for (i = 0; i < mbox.mb_nstatus; i++) { /* get pointer to busy command */ idx = mbox.mb_completed[i] - 1; ac = sc->amr_busycmd[idx]; /* really a busy command? */ if (ac != NULL) { /* pull the command from the busy index */ amr_freeslot(ac); /* save status for later use */ ac->ac_status = mbox.mb_status; amr_enqueue_completed(ac, &head); debug(3, "completed command with status %x", mbox.mb_status); } else { device_printf(sc->amr_dev, "bad slot %d completed\n", idx); } } } else break; /* no work */ } /* handle completion and timeouts */ amr_complete(sc, &head); return(result); } /******************************************************************************** * Do completion processing on done commands on (sc) */ static void amr_complete(void *context, ac_qhead_t *head) { struct amr_softc *sc = (struct amr_softc *)context; struct amr_command *ac; debug_called(3); /* pull completed commands off the queue */ for (;;) { ac = amr_dequeue_completed(sc, head); if (ac == NULL) break; /* unmap the command's data buffer */ amr_unmapcmd(ac); /* * Is there a completion handler? */ if (ac->ac_complete != NULL) { /* unbusy the command */ ac->ac_flags &= ~AMR_CMD_BUSY; ac->ac_complete(ac); /* * Is someone sleeping on this one? */ } else { lockmgr(&sc->amr_list_lock, LK_EXCLUSIVE); ac->ac_flags &= ~AMR_CMD_BUSY; if (ac->ac_flags & AMR_CMD_SLEEP) { /* unbusy the command */ wakeup(ac); } lockmgr(&sc->amr_list_lock, LK_RELEASE); } if(!sc->amr_busyslots) { wakeup(sc); } } lockmgr(&sc->amr_list_lock, LK_EXCLUSIVE); sc->amr_state &= ~AMR_STATE_QUEUE_FRZN; amr_startio(sc); lockmgr(&sc->amr_list_lock, LK_RELEASE); } /******************************************************************************** ******************************************************************************** Command Buffer Management ******************************************************************************** ********************************************************************************/ /******************************************************************************** * Get a new command buffer. * * This may return NULL in low-memory cases. * * If possible, we recycle a command buffer that's been used before. */ struct amr_command * amr_alloccmd(struct amr_softc *sc) { struct amr_command *ac; debug_called(3); ac = amr_dequeue_free(sc); if (ac == NULL) { sc->amr_state |= AMR_STATE_QUEUE_FRZN; return(NULL); } /* clear out significant fields */ ac->ac_status = 0; bzero(&ac->ac_mailbox, sizeof(struct amr_mailbox)); ac->ac_flags = 0; ac->ac_bio = NULL; ac->ac_data = NULL; ac->ac_complete = NULL; ac->ac_retries = 0; ac->ac_tag = NULL; ac->ac_datamap = NULL; return(ac); } /******************************************************************************** * Release a command buffer for recycling. */ void amr_releasecmd(struct amr_command *ac) { debug_called(3); amr_enqueue_free(ac); } /******************************************************************************** * Allocate a new command cluster and initialise it. */ static void amr_alloccmd_cluster(struct amr_softc *sc) { struct amr_command_cluster *acc; struct amr_command *ac; int i, nextslot; /* * If we haven't found the real limit yet, let us have a couple of * commands in order to be able to probe. */ if (sc->amr_maxio == 0) sc->amr_maxio = 2; if (sc->amr_nextslot > sc->amr_maxio) return; acc = kmalloc(AMR_CMD_CLUSTERSIZE, M_AMR, M_NOWAIT | M_ZERO); if (acc != NULL) { nextslot = sc->amr_nextslot; lockmgr(&sc->amr_list_lock, LK_EXCLUSIVE); TAILQ_INSERT_TAIL(&sc->amr_cmd_clusters, acc, acc_link); lockmgr(&sc->amr_list_lock, LK_RELEASE); for (i = 0; i < AMR_CMD_CLUSTERCOUNT; i++) { ac = &acc->acc_command[i]; ac->ac_sc = sc; ac->ac_slot = nextslot; /* * The SG table for each slot is a fixed size and is assumed to * to hold 64-bit s/g objects when the driver is configured to do * 64-bit DMA. 32-bit DMA commands still use the same table, but * cast down to 32-bit objects. */ if (AMR_IS_SG64(sc)) { ac->ac_sgbusaddr = sc->amr_sgbusaddr + (ac->ac_slot * AMR_NSEG * sizeof(struct amr_sg64entry)); ac->ac_sg.sg64 = sc->amr_sg64table + (ac->ac_slot * AMR_NSEG); } else { ac->ac_sgbusaddr = sc->amr_sgbusaddr + (ac->ac_slot * AMR_NSEG * sizeof(struct amr_sgentry)); ac->ac_sg.sg32 = sc->amr_sgtable + (ac->ac_slot * AMR_NSEG); } ac->ac_ccb = sc->amr_ccb + ac->ac_slot; ac->ac_ccb_busaddr = sc->amr_ccb_busaddr + (ac->ac_slot * sizeof(union amr_ccb)); if (bus_dmamap_create(sc->amr_buffer_dmat, 0, &ac->ac_dmamap)) break; if (AMR_IS_SG64(sc) && (bus_dmamap_create(sc->amr_buffer64_dmat, 0,&ac->ac_dma64map))) break; amr_releasecmd(ac); if (++nextslot > sc->amr_maxio) break; } sc->amr_nextslot = nextslot; } } /******************************************************************************** * Free a command cluster */ static void amr_freecmd_cluster(struct amr_command_cluster *acc) { struct amr_softc *sc = acc->acc_command[0].ac_sc; int i; for (i = 0; i < AMR_CMD_CLUSTERCOUNT; i++) { if (acc->acc_command[i].ac_sc == NULL) break; bus_dmamap_destroy(sc->amr_buffer_dmat, acc->acc_command[i].ac_dmamap); if (AMR_IS_SG64(sc)) bus_dmamap_destroy(sc->amr_buffer64_dmat, acc->acc_command[i].ac_dma64map); } kfree(acc, M_AMR); } /******************************************************************************** ******************************************************************************** Interface-specific Shims ******************************************************************************** ********************************************************************************/ /******************************************************************************** * Tell the controller that the mailbox contains a valid command */ static int amr_quartz_submit_command(struct amr_command *ac) { struct amr_softc *sc = ac->ac_sc; static struct timeval lastfail; static int curfail; int i = 0; lockmgr(&sc->amr_hw_lock, LK_EXCLUSIVE); while (sc->amr_mailbox->mb_busy && (i++ < 10)) { DELAY(1); /* This is a no-op read that flushes pending mailbox updates */ AMR_QGET_ODB(sc); } if (sc->amr_mailbox->mb_busy) { lockmgr(&sc->amr_hw_lock, LK_RELEASE); if (ac->ac_retries++ > 1000) { if (ppsratecheck(&lastfail, &curfail, 1)) device_printf(sc->amr_dev, "Too many retries on command %p. " "Controller is likely dead\n", ac); ac->ac_retries = 0; } return (EBUSY); } /* * Save the slot number so that we can locate this command when complete. * Note that ident = 0 seems to be special, so we don't use it. */ ac->ac_mailbox.mb_ident = ac->ac_slot + 1; /* will be coppied into mbox */ bcopy(&ac->ac_mailbox, (void *)(uintptr_t)(volatile void *)sc->amr_mailbox, 14); sc->amr_mailbox->mb_busy = 1; sc->amr_mailbox->mb_poll = 0; sc->amr_mailbox->mb_ack = 0; sc->amr_mailbox64->sg64_hi = ac->ac_sg64_hi; sc->amr_mailbox64->sg64_lo = ac->ac_sg64_lo; AMR_QPUT_IDB(sc, sc->amr_mailboxphys | AMR_QIDB_SUBMIT); lockmgr(&sc->amr_hw_lock, LK_RELEASE); return(0); } static int amr_std_submit_command(struct amr_command *ac) { struct amr_softc *sc = ac->ac_sc; static struct timeval lastfail; static int curfail; lockmgr(&sc->amr_hw_lock, LK_EXCLUSIVE); if (AMR_SGET_MBSTAT(sc) & AMR_SMBOX_BUSYFLAG) { lockmgr(&sc->amr_hw_lock, LK_RELEASE); if (ac->ac_retries++ > 1000) { if (ppsratecheck(&lastfail, &curfail, 1)) device_printf(sc->amr_dev, "Too many retries on command %p. " "Controller is likely dead\n", ac); ac->ac_retries = 0; } return (EBUSY); } /* * Save the slot number so that we can locate this command when complete. * Note that ident = 0 seems to be special, so we don't use it. */ ac->ac_mailbox.mb_ident = ac->ac_slot + 1; /* will be coppied into mbox */ bcopy(&ac->ac_mailbox, (void *)(uintptr_t)(volatile void *)sc->amr_mailbox, 14); sc->amr_mailbox->mb_busy = 1; sc->amr_mailbox->mb_poll = 0; sc->amr_mailbox->mb_ack = 0; AMR_SPOST_COMMAND(sc); lockmgr(&sc->amr_hw_lock, LK_RELEASE); return(0); } /******************************************************************************** * Claim any work that the controller has completed; acknowledge completion, * save details of the completion in (mbsave) */ static int amr_quartz_get_work(struct amr_softc *sc, struct amr_mailbox *mbsave) { int worked, i; u_int32_t outd; u_int8_t nstatus; u_int8_t completed[46]; debug_called(3); worked = 0; /* work waiting for us? */ if ((outd = AMR_QGET_ODB(sc)) == AMR_QODB_READY) { /* acknowledge interrupt */ AMR_QPUT_ODB(sc, AMR_QODB_READY); while ((nstatus = sc->amr_mailbox->mb_nstatus) == 0xff) DELAY(1); sc->amr_mailbox->mb_nstatus = 0xff; /* wait until fw wrote out all completions */ for (i = 0; i < nstatus; i++) { while ((completed[i] = sc->amr_mailbox->mb_completed[i]) == 0xff) DELAY(1); sc->amr_mailbox->mb_completed[i] = 0xff; } /* Save information for later processing */ mbsave->mb_nstatus = nstatus; mbsave->mb_status = sc->amr_mailbox->mb_status; sc->amr_mailbox->mb_status = 0xff; for (i = 0; i < nstatus; i++) mbsave->mb_completed[i] = completed[i]; /* acknowledge that we have the commands */ AMR_QPUT_IDB(sc, AMR_QIDB_ACK); #if 0 #ifndef AMR_QUARTZ_GOFASTER /* * This waits for the controller to notice that we've taken the * command from it. It's very inefficient, and we shouldn't do it, * but if we remove this code, we stop completing commands under * load. * * Peter J says we shouldn't do this. The documentation says we * should. Who is right? */ while(AMR_QGET_IDB(sc) & AMR_QIDB_ACK) ; /* XXX aiee! what if it dies? */ #endif #endif worked = 1; /* got some work */ } return(worked); } static int amr_std_get_work(struct amr_softc *sc, struct amr_mailbox *mbsave) { int worked; u_int8_t istat; debug_called(3); worked = 0; /* check for valid interrupt status */ istat = AMR_SGET_ISTAT(sc); if ((istat & AMR_SINTR_VALID) != 0) { AMR_SPUT_ISTAT(sc, istat); /* ack interrupt status */ /* save mailbox, which contains a list of completed commands */ bcopy((void *)(uintptr_t)(volatile void *)sc->amr_mailbox, mbsave, sizeof(*mbsave)); AMR_SACK_INTERRUPT(sc); /* acknowledge we have the mailbox */ worked = 1; } return(worked); } /******************************************************************************** * Notify the controller of the mailbox location. */ static void amr_std_attach_mailbox(struct amr_softc *sc) { /* program the mailbox physical address */ AMR_SBYTE_SET(sc, AMR_SMBOX_0, sc->amr_mailboxphys & 0xff); AMR_SBYTE_SET(sc, AMR_SMBOX_1, (sc->amr_mailboxphys >> 8) & 0xff); AMR_SBYTE_SET(sc, AMR_SMBOX_2, (sc->amr_mailboxphys >> 16) & 0xff); AMR_SBYTE_SET(sc, AMR_SMBOX_3, (sc->amr_mailboxphys >> 24) & 0xff); AMR_SBYTE_SET(sc, AMR_SMBOX_ENABLE, AMR_SMBOX_ADDR); /* clear any outstanding interrupt and enable interrupts proper */ AMR_SACK_INTERRUPT(sc); AMR_SENABLE_INTR(sc); } #ifdef AMR_BOARD_INIT /******************************************************************************** * Initialise the controller */ static int amr_quartz_init(struct amr_softc *sc) { int status, ostatus; device_printf(sc->amr_dev, "initial init status %x\n", AMR_QGET_INITSTATUS(sc)); AMR_QRESET(sc); ostatus = 0xff; while ((status = AMR_QGET_INITSTATUS(sc)) != AMR_QINIT_DONE) { if (status != ostatus) { device_printf(sc->amr_dev, "(%x) %s\n", status, amr_describe_code(amr_table_qinit, status)); ostatus = status; } switch (status) { case AMR_QINIT_NOMEM: return(ENOMEM); case AMR_QINIT_SCAN: /* XXX we could print channel/target here */ break; } } return(0); } static int amr_std_init(struct amr_softc *sc) { int status, ostatus; device_printf(sc->amr_dev, "initial init status %x\n", AMR_SGET_INITSTATUS(sc)); AMR_SRESET(sc); ostatus = 0xff; while ((status = AMR_SGET_INITSTATUS(sc)) != AMR_SINIT_DONE) { if (status != ostatus) { device_printf(sc->amr_dev, "(%x) %s\n", status, amr_describe_code(amr_table_sinit, status)); ostatus = status; } switch (status) { case AMR_SINIT_NOMEM: return(ENOMEM); case AMR_SINIT_INPROG: /* XXX we could print channel/target here? */ break; } } return(0); } #endif /******************************************************************************** ******************************************************************************** Debugging ******************************************************************************** ********************************************************************************/ /******************************************************************************** * Identify the controller and print some information about it. */ static void amr_describe_controller(struct amr_softc *sc) { struct amr_prodinfo *ap; struct amr_enquiry *ae; char *prod; int status; /* * Try to get 40LD product info, which tells us what the card is labelled as. */ if ((ap = amr_enquiry(sc, 2048, AMR_CMD_CONFIG, AMR_CONFIG_PRODUCT_INFO, 0, &status)) != NULL) { device_printf(sc->amr_dev, " Firmware %.16s, BIOS %.16s, %dMB RAM\n", ap->ap_product, ap->ap_firmware, ap->ap_bios, ap->ap_memsize); kfree(ap, M_AMR); return; } /* * Try 8LD extended ENQUIRY to get controller signature, and use lookup table. */ if ((ae = (struct amr_enquiry *)amr_enquiry(sc, 2048, AMR_CMD_EXT_ENQUIRY2, 0, 0, &status)) != NULL) { prod = amr_describe_code(amr_table_adaptertype, ae->ae_signature); } else if ((ae = (struct amr_enquiry *)amr_enquiry(sc, 2048, AMR_CMD_ENQUIRY, 0, 0, &status)) != NULL) { /* * Try to work it out based on the PCI signatures. */ switch (pci_get_device(sc->amr_dev)) { case 0x9010: prod = "Series 428"; break; case 0x9060: prod = "Series 434"; break; default: prod = "unknown controller"; break; } } else { device_printf(sc->amr_dev, "\n"); return; } /* * HP NetRaid controllers have a special encoding of the firmware and * BIOS versions. The AMI version seems to have it as strings whereas * the HP version does it with a leading uppercase character and two * binary numbers. */ if(ae->ae_adapter.aa_firmware[2] >= 'A' && ae->ae_adapter.aa_firmware[2] <= 'Z' && ae->ae_adapter.aa_firmware[1] < ' ' && ae->ae_adapter.aa_firmware[0] < ' ' && ae->ae_adapter.aa_bios[2] >= 'A' && ae->ae_adapter.aa_bios[2] <= 'Z' && ae->ae_adapter.aa_bios[1] < ' ' && ae->ae_adapter.aa_bios[0] < ' ') { /* this looks like we have an HP NetRaid version of the MegaRaid */ if(ae->ae_signature == AMR_SIG_438) { /* the AMI 438 is a NetRaid 3si in HP-land */ prod = "HP NetRaid 3si"; } device_printf(sc->amr_dev, "<%s> Firmware %c.%02d.%02d, BIOS %c.%02d.%02d, %dMB RAM\n", prod, ae->ae_adapter.aa_firmware[2], ae->ae_adapter.aa_firmware[1], ae->ae_adapter.aa_firmware[0], ae->ae_adapter.aa_bios[2], ae->ae_adapter.aa_bios[1], ae->ae_adapter.aa_bios[0], ae->ae_adapter.aa_memorysize); } else { device_printf(sc->amr_dev, "<%s> Firmware %.4s, BIOS %.4s, %dMB RAM\n", prod, ae->ae_adapter.aa_firmware, ae->ae_adapter.aa_bios, ae->ae_adapter.aa_memorysize); } kfree(ae, M_AMR); } int amr_dump_blocks(struct amr_softc *sc, int unit, u_int32_t lba, void *data, int blks) { struct amr_command *ac; int error = EIO; debug_called(1); sc->amr_state |= AMR_STATE_INTEN; /* get ourselves a command buffer */ if ((ac = amr_alloccmd(sc)) == NULL) goto out; /* set command flags */ ac->ac_flags |= AMR_CMD_PRIORITY | AMR_CMD_DATAOUT; /* point the command at our data */ ac->ac_data = data; ac->ac_length = blks * AMR_BLKSIZE; /* build the command proper */ ac->ac_mailbox.mb_command = AMR_CMD_LWRITE; ac->ac_mailbox.mb_blkcount = blks; ac->ac_mailbox.mb_lba = lba; ac->ac_mailbox.mb_drive = unit; /* can't assume that interrupts are going to work here, so play it safe */ if (sc->amr_poll_command(ac)) goto out; error = ac->ac_status; out: if (ac != NULL) amr_releasecmd(ac); sc->amr_state &= ~AMR_STATE_INTEN; return (error); } #ifdef AMR_DEBUG /******************************************************************************** * Print the command (ac) in human-readable format */ #if 0 static void amr_printcommand(struct amr_command *ac) { struct amr_softc *sc = ac->ac_sc; struct amr_sgentry *sg; int i; device_printf(sc->amr_dev, "cmd %x ident %d drive %d\n", ac->ac_mailbox.mb_command, ac->ac_mailbox.mb_ident, ac->ac_mailbox.mb_drive); device_printf(sc->amr_dev, "blkcount %d lba %d\n", ac->ac_mailbox.mb_blkcount, ac->ac_mailbox.mb_lba); device_printf(sc->amr_dev, "virtaddr %p length %lu\n", ac->ac_data, (unsigned long)ac->ac_length); device_printf(sc->amr_dev, "sg physaddr %08x nsg %d\n", ac->ac_mailbox.mb_physaddr, ac->ac_mailbox.mb_nsgelem); device_printf(sc->amr_dev, "ccb %p bio %p\n", ac->ac_ccb_data, ac->ac_bio); /* get base address of s/g table */ sg = sc->amr_sgtable + (ac->ac_slot * AMR_NSEG); for (i = 0; i < ac->ac_mailbox.mb_nsgelem; i++, sg++) device_printf(sc->amr_dev, " %x/%d\n", sg->sg_addr, sg->sg_count); } #endif #endif