#!/usr/bin/env perl -w
#-*-mode:perl-*-
#############################################################################
#
# Copyright (C) 1999-2001 Jason Evans <jasone@freebsd.org>.
# All rights reserved.
# 
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice(s), this list of conditions and the following disclaimer as
#    the first lines of this file unmodified other than the possible
#    addition of one or more copyright notices.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice(s), this list of conditions and the following disclaimer in
#    the documentation and/or other materials provided with the
#    distribution.
# 
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) ``AS IS'' AND ANY
# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
#############################################################################
#
# Test harness.
#
# $FreeBSD: src/lib/libc_r/test/verify,v 1.1.2.2 2001/06/22 21:44:27 jasone Exp $
#
#############################################################################

# Shut off buffering.
select(STDOUT);
$| = 1;

#
# Parse command-line arguments.
#
use Getopt::Long;
Getopt::Long::config("bundling"); # Allow -hv rather than forcing -h -v.

# Set option defaults for optional arguments.
$opt_help = 0;
$opt_verbose = 0;
$opt_quiet = 0;
$opt_srcdir = ".";
$opt_objdir = ".";
$opt_ustats = 0;
$opt_zero = 0;

$opt_retval =
&GetOptions("h|help" => \$opt_help,
	    "v|verbose" => \$opt_verbose,
	    "q|quiet" => \$opt_quiet,
	    "s|srcdir=s" => \$opt_srcdir,
            "o|objdir=s" => \$opt_objdir,
	    "u|ustats" => \$opt_ustats,
	    "z|zero" => \$opt_zero
	    );

if ($opt_help)
{
    &usage();
    exit(0);
}

if ($opt_retval == 0)
{
    &usage();
    exit 1;
}

if ($opt_verbose && $opt_quiet)
{
    print STDERR "-v and -q are incompatible\n";
    &usage();
    exit 1;
}

if ($#ARGV + 1 == 0)
{
    print STDERR "No tests specified\n";
    &usage();
    exit 1;
}

if ($opt_verbose)
{
    print STDERR "Option values: h:$opt_help, v:$opt_verbose, "
	. "s:\"$opt_srcdir\", o:\"$opt_objdir\" "
	. "q:$opt_quiet, u:$opt_ustats, z:$opt_zero\n";
    printf STDERR "Tests (%d total): @ARGV\n", $#ARGV + 1;
}

#
# Create and print header.
#
@TSTATS =
(
 "--------------------------------------------------------------------------\n",
 "Test                                      c_user c_system c_total     chng\n",
 " passed/FAILED                            h_user h_system h_total   %% chng\n"
 );

if (!$opt_quiet)
{
    foreach $line (@TSTATS)
    {
	printf STDOUT "$line";
    }
}

#
# Run sequence test(s).
#
$total_utime = 0.0; # Total user time.
$total_stime = 0.0; # Total system time.
$total_hutime = 0.0; # Total historical user time.
$total_hstime = 0.0; # Total historical system time.
$total_ntime = 0.0; # Total time for tests that have historical data.

foreach $test (@ARGV)
{
    # Strip out any whitespace in $test.
    $test =~ s/^\s*(.*)\s*$/$1/;

    $okay = 1;

    if (-e "$opt_srcdir/$test.exp")
    {
	# Diff mode.

	($okay, $utime, $stime) = &run_test($test);

	if (-e "$opt_objdir/$test.out")
	{
	    `diff $opt_srcdir/$test.exp $opt_objdir/$test.out > $opt_objdir/$test.diff 2>&1`;
	    if ($?)
	    {
		# diff returns non-zero if there is a difference.
		$okay = 0;
	    }
	}
	else
	{
	    $okay = 0;
	    if ($opt_verbose)
	    {
		print STDERR
		    "Nonexistent output file \"$opt_objdir/$test.out\"\n";
	    }
	}

	($hutime, $hstime) = &print_stats($test, $okay, 0, 0, $utime, $stime);
    }
    else
    {
	# Sequence mode.

	($okay, $utime, $stime) = &run_test($test);

	if (open (STEST_OUT, "<$opt_objdir/$test.out"))
	{
	    $num_subtests = 0;
	    $num_failed_subtests = 0;

	    while (defined($line = <STEST_OUT>))
	    {
		if ($line =~ /1\.\.(\d+)/)
		{
		    $num_subtests = $1;
		    last;
		}
	    }
	    if ($num_subtests == 0)
	    {
		$okay = 0;
		if ($opt_verbose)
		{
		    print STDERR "Malformed or missing 1..n line\n";
		}
	    }
	    else
	    {
		for ($subtest = 1; $subtest <= $num_subtests; $subtest++)
		{
		    while (defined($line = <STEST_OUT>))
		    {
			if ($line =~ /^not\s+ok\s+(\d+)?/)
			{
			    $not = 1;
			    $test_num = $1;
			    last;
			}
			elsif ($line =~ /^ok\s+(\d+)?/)
			{
			    $not = 0;
			    $test_num = $1;
			    last;
			}
		    }
		    if (defined($line))
		    {
			if (defined($test_num) && ($test_num != $subtest))
			{
			    # There was no output printed for one or more tests.
			    for (; $subtest < $test_num; $subtest++)
			    {
				$num_failed_subtests++;
			    }
			}
			if ($not)
			{
			    $num_failed_subtests++;
			}
		    }
		    else
		    {
			for (; $subtest <= $num_subtests; $subtest++)
			{
			    $num_failed_subtests++;
			}
		    }
		}

		if (0 < $num_failed_subtests)
		{
		    $okay = 0;
		}
	    }
	}
	else
	{
	    if (!$opt_quiet)
	    {
		print STDERR "Cannot open output file \"$opt_objdir/$test.out\"\n";
	    }
	    exit 1;
	}

	($hutime, $hstime) = &print_stats($test, $okay,
					  $num_failed_subtests, $num_subtests,
					  $utime, $stime);
    }

    $total_hutime += $hutime;
    $total_hstime += $hstime;

    if ($okay)
    {
	$total_utime += $utime;
	$total_stime += $stime;
    }
    else
    {
	@FAILED_TESTS = (@FAILED_TESTS, $test);
    }

    # If there were historical data, add the run time to the total time to 
    # compare against the historical run time.
    if (0 < ($hutime + $hstime))
    {
	$total_ntime += $utime + $stime;
    }
}

# Print summary stats.
$tt_str = sprintf ("%d / %d passed (%5.2f%%%%)",
		   ($#ARGV + 1) - ($#FAILED_TESTS + 1),
		   $#ARGV + 1,
		   (($#ARGV + 1) - ($#FAILED_TESTS + 1))
		   / ($#ARGV + 1) * 100);

$t_str = sprintf ("Totals                                   %7.2f  %7.2f %7.2f"
                  . "  %7.2f\n"
		  . " %s %7.2f  %7.2f %7.2f %7.2f%%%%\n",
		  $total_utime, $total_stime, $total_utime + $total_stime,
		  ($total_ntime - ($total_hutime + $total_hstime)),
		  $tt_str . ' ' x (40 - length($tt_str)),
		  $total_hutime, $total_hstime, $total_hutime + $total_hstime,
		  ($total_hutime + $total_hstime == 0.0) ? 0.0 :
		  (($total_ntime
		    - ($total_hutime + $total_hstime))
		   / ($total_hutime + $total_hstime) * 100));

@TSTATS = ("--------------------------------------------------------------------------\n",
	   $t_str,
	   "--------------------------------------------------------------------------\n"
	   );
if (!$opt_quiet)
{
    foreach $line (@TSTATS)
    {
	printf STDOUT "$line";
    }
}

if ($#FAILED_TESTS >= 0)
{
    # One or more tests failed, so return an error.
    exit 1;
}
# End of main execution.

sub run_test
{
    my ($test) = @_;
    my ($okay) = 1;
    my ($tutime, $tstime);
    my ($utime, $stime, $cutime, $cstime);
    my (@TSTATS, @TPATH);
    my ($t_str);
    my ($srcdir, $objdir);

    # Get the path component of $test, if any.
    @TPATH = split(/\//, $test);
    pop(@TPATH);
    $srcdir = join('/', ($opt_srcdir, @TPATH));
    $objdir = join('/', ($opt_objdir, @TPATH));

    @TSTATS = ("--------------------------------------------------------------------------\n");

    $t_str = sprintf ("%s%s", $test, ' ' x (40 - length($test)));
    @TSTATS = (@TSTATS, $t_str);
    @STATS = (@STATS, @TSTATS);
    if (!$opt_quiet)
    {
	foreach $line (@TSTATS)
	{
	    printf STDOUT "$line";
	}
    }

    ($utime, $stime, $cutime, $cstime) = times;
    `$opt_objdir/$test $srcdir $objdir > $opt_objdir/$test.out 2>&1`;
    ($utime, $stime, $tutime, $tstime) = times;

    # Subtract the before time from the after time.
    $tutime -= $cutime;
    $tstime -= $cstime;

    if ($opt_zero)
    {
	if ($?)
	{
	    $okay = 0;
	    if ($opt_verbose)
	    {
		print STDERR
		    "\"$opt_objdir/$test > $opt_objdir/$test.out 2>&1\" returned $?\n";
	    }
	}
    }

    return ($okay, $tutime, $tstime);
}

sub print_stats
{
    my ($test, $okay, $failed_subtests, $subtests, $utime, $stime) = @_;
    my ($hutime, $hstime);
#    my (TEST_PERF);
    my (@TSTATS);
    my ($t_str, $pass_str);

    $pass_str = $okay ? "passed" : "*** FAILED ***";
    if ((0 != $subtests) && (!$okay))
    {
	$pass_str = $pass_str . " ($failed_subtests/$subtests failed)";
    }
    $pass_str = $pass_str . ' ' x (39 - length($pass_str));
    
    if (-r "$test.perf")
    {
	if (!open (TEST_PERF, "<$opt_objdir/$test.perf"))
	{
	    print STDERR "Unable to open \"$opt_objdir/$test.perf\"\n";
	    exit 1;
	}
	$_ = <TEST_PERF>;

	($hutime, $hstime) = split;
	close TEST_PERF;

	$t_str = sprintf (" %7.2f  %7.2f %7.2f  %7.2f\n"
			  . " %s %7.2f  %7.2f %7.2f %7.2f%%%%\n",
			  $utime, $stime, $utime + $stime,
			  ($utime + $stime) - ($hutime + $hstime),
			  $pass_str,
			  $hutime, $hstime, $hutime + $hstime,
			  (($hutime + $hstime) == 0.0) ? 0.0 :
			  ((($utime + $stime) - ($hutime + $hstime))
			   / ($hutime + $hstime) * 100));
    }
    else
    {
	$hutime = 0.0;
	$hstime = 0.0;

	$t_str = sprintf (" %7.2f  %7.2f %7.2f        \n"
			  . " %s\n",
			  $utime, $stime, $utime + $stime,
			  $pass_str);
    }
    @TSTATS = ($t_str);
    if (!$opt_quiet)
    {
	foreach $line (@TSTATS)
	{
	    printf STDOUT "$line";
	}
    }

    if ($okay && $opt_ustats)
    {
	if (!open (TEST_PERF, ">$opt_objdir/$test.perf"))
	{
	    if (!$opt_quiet)
	    {
		print STDERR "Unable to update \"$opt_objdir/$test.perf\"\n";
	    }
	}
	else
	{
	    print TEST_PERF "$utime $stime\n";
	    close TEST_PERF;
	}
    }

    return ($hutime, $hstime);
}

sub usage
{
    print <<EOF;
$0 usage:
    $0 [<options>] <test>+

    Option        | Description
    --------------+-------------------------------------------------------------
    -h --help     | Print usage and exit.
    -v --verbose  | Verbose (incompatible with quiet).
    -q --quiet    | Quiet (incompatible with verbose).
    -s --srcdir   | Path to source tree (default is ".").
    -o --objdir   | Path to object tree (default is ".").
    -u --ustats   | Update historical statistics (stored in "<test>.perf".
    -z --zero     | Consider non-zero exit code to be an error.
    --------------+-------------------------------------------------------------

    If <test>.exp exists, <test>'s output is diff'ed with <test>.exp.  Any
    difference is considered failure.

    If <test>.exp does not exist, output to stdout of the following form is
    expected:

        1..<n>
        {not }ok[ 1]
        {not }ok[ 2]
        ...
        {not }ok[ n]

    1 <= <n> < 2^31

    Lines which do not match the patterns shown above are ignored.
EOF
}