/*- * SPDX-License-Identifier: BSD-2-Clause-FreeBSD * * Copyright (c) 2012 Huang Wen Hui * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "usbdevs.h" #define USB_DEBUG_VAR wsp_debug #include #include #define WSP_DRIVER_NAME "wsp" #define WSP_BUFFER_MAX 1024 #define WSP_CLAMP(x,low,high) do { \ if ((x) < (low)) \ (x) = (low); \ else if ((x) > (high)) \ (x) = (high); \ } while (0) /* Tunables */ static SYSCTL_NODE(_hw_usb, OID_AUTO, wsp, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, "USB wsp"); #ifdef USB_DEBUG enum wsp_log_level { WSP_LLEVEL_DISABLED = 0, WSP_LLEVEL_ERROR, WSP_LLEVEL_DEBUG, /* for troubleshooting */ WSP_LLEVEL_INFO, /* for diagnostics */ }; static int wsp_debug = WSP_LLEVEL_ERROR;/* the default is to only log errors */ SYSCTL_INT(_hw_usb_wsp, OID_AUTO, debug, CTLFLAG_RWTUN, &wsp_debug, WSP_LLEVEL_ERROR, "WSP debug level"); #endif /* USB_DEBUG */ static struct wsp_tuning { int scale_factor; int z_factor; int pressure_touch_threshold; int pressure_untouch_threshold; int pressure_tap_threshold; int scr_hor_threshold; int enable_single_tap_clicks; } wsp_tuning = { .scale_factor = 12, .z_factor = 5, .pressure_touch_threshold = 50, .pressure_untouch_threshold = 10, .pressure_tap_threshold = 120, .scr_hor_threshold = 20, .enable_single_tap_clicks = 1, }; static void wsp_runing_rangecheck(struct wsp_tuning *ptun) { WSP_CLAMP(ptun->scale_factor, 1, 63); WSP_CLAMP(ptun->z_factor, 1, 63); WSP_CLAMP(ptun->pressure_touch_threshold, 1, 255); WSP_CLAMP(ptun->pressure_untouch_threshold, 1, 255); WSP_CLAMP(ptun->pressure_tap_threshold, 1, 255); WSP_CLAMP(ptun->scr_hor_threshold, 1, 255); WSP_CLAMP(ptun->enable_single_tap_clicks, 0, 1); } SYSCTL_INT(_hw_usb_wsp, OID_AUTO, scale_factor, CTLFLAG_RWTUN, &wsp_tuning.scale_factor, 0, "movement scale factor"); SYSCTL_INT(_hw_usb_wsp, OID_AUTO, z_factor, CTLFLAG_RWTUN, &wsp_tuning.z_factor, 0, "Z-axis scale factor"); SYSCTL_INT(_hw_usb_wsp, OID_AUTO, pressure_touch_threshold, CTLFLAG_RWTUN, &wsp_tuning.pressure_touch_threshold, 0, "touch pressure threshold"); SYSCTL_INT(_hw_usb_wsp, OID_AUTO, pressure_untouch_threshold, CTLFLAG_RWTUN, &wsp_tuning.pressure_untouch_threshold, 0, "untouch pressure threshold"); SYSCTL_INT(_hw_usb_wsp, OID_AUTO, pressure_tap_threshold, CTLFLAG_RWTUN, &wsp_tuning.pressure_tap_threshold, 0, "tap pressure threshold"); SYSCTL_INT(_hw_usb_wsp, OID_AUTO, scr_hor_threshold, CTLFLAG_RWTUN, &wsp_tuning.scr_hor_threshold, 0, "horizontal scrolling threshold"); SYSCTL_INT(_hw_usb_wsp, OID_AUTO, enable_single_tap_clicks, CTLFLAG_RWTUN, &wsp_tuning.enable_single_tap_clicks, 0, "enable single tap clicks"); /* * Some tables, structures, definitions and constant values for the * touchpad protocol has been copied from Linux's * "drivers/input/mouse/bcm5974.c" which has the following copyright * holders under GPLv2. All device specific code in this driver has * been written from scratch. The decoding algorithm is based on * output from FreeBSD's usbdump. * * Copyright (C) 2008 Henrik Rydberg (rydberg@euromail.se) * Copyright (C) 2008 Scott Shawcroft (scott.shawcroft@gmail.com) * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) * Copyright (C) 2005 Johannes Berg (johannes@sipsolutions.net) * Copyright (C) 2005 Stelian Pop (stelian@popies.net) * Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de) * Copyright (C) 2005 Peter Osterlund (petero2@telia.com) * Copyright (C) 2005 Michael Hanselmann (linux-kernel@hansmi.ch) * Copyright (C) 2006 Nicolas Boichat (nicolas@boichat.ch) */ /* button data structure */ struct bt_data { uint8_t unknown1; /* constant */ uint8_t button; /* left button */ uint8_t rel_x; /* relative x coordinate */ uint8_t rel_y; /* relative y coordinate */ } __packed; /* trackpad header types */ enum tp_type { TYPE1, /* plain trackpad */ TYPE2, /* button integrated in trackpad */ TYPE3, /* additional header fields since June 2013 */ TYPE4 /* additional header field for pressure data */ }; /* trackpad finger data offsets, le16-aligned */ #define FINGER_TYPE1 (13 * 2) #define FINGER_TYPE2 (15 * 2) #define FINGER_TYPE3 (19 * 2) #define FINGER_TYPE4 (23 * 2) /* trackpad button data offsets */ #define BUTTON_TYPE2 15 #define BUTTON_TYPE3 23 #define BUTTON_TYPE4 31 /* list of device capability bits */ #define HAS_INTEGRATED_BUTTON 1 /* trackpad finger data block size */ #define FSIZE_TYPE1 (14 * 2) #define FSIZE_TYPE2 (14 * 2) #define FSIZE_TYPE3 (14 * 2) #define FSIZE_TYPE4 (15 * 2) /* trackpad finger header - little endian */ struct tp_header { uint8_t flag; uint8_t sn0; uint16_t wFixed0; uint32_t dwSn1; uint32_t dwFixed1; uint16_t wLength; uint8_t nfinger; uint8_t ibt; int16_t wUnknown[6]; uint8_t q1; uint8_t q2; } __packed; /* trackpad finger structure - little endian */ struct tp_finger { int16_t origin; /* zero when switching track finger */ int16_t abs_x; /* absolute x coodinate */ int16_t abs_y; /* absolute y coodinate */ int16_t rel_x; /* relative x coodinate */ int16_t rel_y; /* relative y coodinate */ int16_t tool_major; /* tool area, major axis */ int16_t tool_minor; /* tool area, minor axis */ int16_t orientation; /* 16384 when point, else 15 bit angle */ int16_t touch_major; /* touch area, major axis */ int16_t touch_minor; /* touch area, minor axis */ int16_t unused[2]; /* zeros */ int16_t pressure; /* pressure on forcetouch touchpad */ int16_t multi; /* one finger: varies, more fingers: * constant */ } __packed; /* trackpad finger data size, empirically at least ten fingers */ #define MAX_FINGERS 16 #define SIZEOF_FINGER sizeof(struct tp_finger) #define SIZEOF_ALL_FINGERS (MAX_FINGERS * SIZEOF_FINGER) #if (WSP_BUFFER_MAX < ((MAX_FINGERS * FSIZE_TYPE4) + FINGER_TYPE4)) #error "WSP_BUFFER_MAX is too small" #endif enum { WSP_FLAG_WELLSPRING1, WSP_FLAG_WELLSPRING2, WSP_FLAG_WELLSPRING3, WSP_FLAG_WELLSPRING4, WSP_FLAG_WELLSPRING4A, WSP_FLAG_WELLSPRING5, WSP_FLAG_WELLSPRING6A, WSP_FLAG_WELLSPRING6, WSP_FLAG_WELLSPRING5A, WSP_FLAG_WELLSPRING7, WSP_FLAG_WELLSPRING7A, WSP_FLAG_WELLSPRING8, WSP_FLAG_WELLSPRING9, WSP_FLAG_MAX, }; /* device-specific configuration */ struct wsp_dev_params { uint8_t caps; /* device capability bitmask */ uint8_t tp_type; /* type of trackpad interface */ uint8_t tp_button; /* offset to button data */ uint8_t tp_offset; /* offset to trackpad finger data */ uint8_t tp_fsize; /* bytes in single finger block */ uint8_t tp_delta; /* offset from header to finger struct */ uint8_t iface_index; uint8_t um_size; /* usb control message length */ uint8_t um_req_val; /* usb control message value */ uint8_t um_req_idx; /* usb control message index */ uint8_t um_switch_idx; /* usb control message mode switch index */ uint8_t um_switch_on; /* usb control message mode switch on */ uint8_t um_switch_off; /* usb control message mode switch off */ }; static const struct wsp_dev_params wsp_dev_params[WSP_FLAG_MAX] = { [WSP_FLAG_WELLSPRING1] = { .caps = 0, .tp_type = TYPE1, .tp_button = 0, .tp_offset = FINGER_TYPE1, .tp_fsize = FSIZE_TYPE1, .tp_delta = 0, .iface_index = 0, .um_size = 8, .um_req_val = 0x03, .um_req_idx = 0x00, .um_switch_idx = 0, .um_switch_on = 0x01, .um_switch_off = 0x08, }, [WSP_FLAG_WELLSPRING2] = { .caps = 0, .tp_type = TYPE1, .tp_button = 0, .tp_offset = FINGER_TYPE1, .tp_fsize = FSIZE_TYPE1, .tp_delta = 0, .iface_index = 0, .um_size = 8, .um_req_val = 0x03, .um_req_idx = 0x00, .um_switch_idx = 0, .um_switch_on = 0x01, .um_switch_off = 0x08, }, [WSP_FLAG_WELLSPRING3] = { .caps = HAS_INTEGRATED_BUTTON, .tp_type = TYPE2, .tp_button = BUTTON_TYPE2, .tp_offset = FINGER_TYPE2, .tp_fsize = FSIZE_TYPE2, .tp_delta = 0, .iface_index = 0, .um_size = 8, .um_req_val = 0x03, .um_req_idx = 0x00, .um_switch_idx = 0, .um_switch_on = 0x01, .um_switch_off = 0x08, }, [WSP_FLAG_WELLSPRING4] = { .caps = HAS_INTEGRATED_BUTTON, .tp_type = TYPE2, .tp_button = BUTTON_TYPE2, .tp_offset = FINGER_TYPE2, .tp_fsize = FSIZE_TYPE2, .tp_delta = 0, .iface_index = 0, .um_size = 8, .um_req_val = 0x03, .um_req_idx = 0x00, .um_switch_idx = 0, .um_switch_on = 0x01, .um_switch_off = 0x08, }, [WSP_FLAG_WELLSPRING4A] = { .caps = HAS_INTEGRATED_BUTTON, .tp_type = TYPE2, .tp_button = BUTTON_TYPE2, .tp_offset = FINGER_TYPE2, .tp_fsize = FSIZE_TYPE2, .tp_delta = 0, .iface_index = 0, .um_size = 8, .um_req_val = 0x03, .um_req_idx = 0x00, .um_switch_idx = 0, .um_switch_on = 0x01, .um_switch_off = 0x08, }, [WSP_FLAG_WELLSPRING5] = { .caps = HAS_INTEGRATED_BUTTON, .tp_type = TYPE2, .tp_button = BUTTON_TYPE2, .tp_offset = FINGER_TYPE2, .tp_fsize = FSIZE_TYPE2, .tp_delta = 0, .iface_index = 0, .um_size = 8, .um_req_val = 0x03, .um_req_idx = 0x00, .um_switch_idx = 0, .um_switch_on = 0x01, .um_switch_off = 0x08, }, [WSP_FLAG_WELLSPRING6] = { .caps = HAS_INTEGRATED_BUTTON, .tp_type = TYPE2, .tp_button = BUTTON_TYPE2, .tp_offset = FINGER_TYPE2, .tp_fsize = FSIZE_TYPE2, .tp_delta = 0, .iface_index = 0, .um_size = 8, .um_req_val = 0x03, .um_req_idx = 0x00, .um_switch_idx = 0, .um_switch_on = 0x01, .um_switch_off = 0x08, }, [WSP_FLAG_WELLSPRING5A] = { .caps = HAS_INTEGRATED_BUTTON, .tp_type = TYPE2, .tp_button = BUTTON_TYPE2, .tp_offset = FINGER_TYPE2, .tp_fsize = FSIZE_TYPE2, .tp_delta = 0, .iface_index = 0, .um_size = 8, .um_req_val = 0x03, .um_req_idx = 0x00, .um_switch_idx = 0, .um_switch_on = 0x01, .um_switch_off = 0x08, }, [WSP_FLAG_WELLSPRING6A] = { .caps = HAS_INTEGRATED_BUTTON, .tp_type = TYPE2, .tp_button = BUTTON_TYPE2, .tp_offset = FINGER_TYPE2, .tp_fsize = FSIZE_TYPE2, .tp_delta = 0, .um_size = 8, .um_req_val = 0x03, .um_req_idx = 0x00, .um_switch_idx = 0, .um_switch_on = 0x01, .um_switch_off = 0x08, }, [WSP_FLAG_WELLSPRING7] = { .caps = HAS_INTEGRATED_BUTTON, .tp_type = TYPE2, .tp_button = BUTTON_TYPE2, .tp_offset = FINGER_TYPE2, .tp_fsize = FSIZE_TYPE2, .tp_delta = 0, .iface_index = 0, .um_size = 8, .um_req_val = 0x03, .um_req_idx = 0x00, .um_switch_idx = 0, .um_switch_on = 0x01, .um_switch_off = 0x08, }, [WSP_FLAG_WELLSPRING7A] = { .caps = HAS_INTEGRATED_BUTTON, .tp_type = TYPE2, .tp_button = BUTTON_TYPE2, .tp_offset = FINGER_TYPE2, .tp_fsize = FSIZE_TYPE2, .tp_delta = 0, .iface_index = 0, .um_size = 8, .um_req_val = 0x03, .um_req_idx = 0x00, .um_switch_idx = 0, .um_switch_on = 0x01, .um_switch_off = 0x08, }, [WSP_FLAG_WELLSPRING8] = { .caps = HAS_INTEGRATED_BUTTON, .tp_type = TYPE3, .tp_button = BUTTON_TYPE3, .tp_offset = FINGER_TYPE3, .tp_fsize = FSIZE_TYPE3, .tp_delta = 0, .iface_index = 0, .um_size = 8, .um_req_val = 0x03, .um_req_idx = 0x00, .um_switch_idx = 0, .um_switch_on = 0x01, .um_switch_off = 0x08, }, [WSP_FLAG_WELLSPRING9] = { .caps = HAS_INTEGRATED_BUTTON, .tp_type = TYPE4, .tp_button = BUTTON_TYPE4, .tp_offset = FINGER_TYPE4, .tp_fsize = FSIZE_TYPE4, .tp_delta = 2, .iface_index = 2, .um_size = 2, .um_req_val = 0x03, .um_req_idx = 0x02, .um_switch_idx = 1, .um_switch_on = 0x01, .um_switch_off = 0x00, }, }; #define WSP_DEV(v,p,i) { USB_VPI(USB_VENDOR_##v, USB_PRODUCT_##v##_##p, i) } static const STRUCT_USB_HOST_ID wsp_devs[] = { /* MacbookAir1.1 */ WSP_DEV(APPLE, WELLSPRING_ANSI, WSP_FLAG_WELLSPRING1), WSP_DEV(APPLE, WELLSPRING_ISO, WSP_FLAG_WELLSPRING1), WSP_DEV(APPLE, WELLSPRING_JIS, WSP_FLAG_WELLSPRING1), /* MacbookProPenryn, aka wellspring2 */ WSP_DEV(APPLE, WELLSPRING2_ANSI, WSP_FLAG_WELLSPRING2), WSP_DEV(APPLE, WELLSPRING2_ISO, WSP_FLAG_WELLSPRING2), WSP_DEV(APPLE, WELLSPRING2_JIS, WSP_FLAG_WELLSPRING2), /* Macbook5,1 (unibody), aka wellspring3 */ WSP_DEV(APPLE, WELLSPRING3_ANSI, WSP_FLAG_WELLSPRING3), WSP_DEV(APPLE, WELLSPRING3_ISO, WSP_FLAG_WELLSPRING3), WSP_DEV(APPLE, WELLSPRING3_JIS, WSP_FLAG_WELLSPRING3), /* MacbookAir3,2 (unibody), aka wellspring4 */ WSP_DEV(APPLE, WELLSPRING4_ANSI, WSP_FLAG_WELLSPRING4), WSP_DEV(APPLE, WELLSPRING4_ISO, WSP_FLAG_WELLSPRING4), WSP_DEV(APPLE, WELLSPRING4_JIS, WSP_FLAG_WELLSPRING4), /* MacbookAir3,1 (unibody), aka wellspring4 */ WSP_DEV(APPLE, WELLSPRING4A_ANSI, WSP_FLAG_WELLSPRING4A), WSP_DEV(APPLE, WELLSPRING4A_ISO, WSP_FLAG_WELLSPRING4A), WSP_DEV(APPLE, WELLSPRING4A_JIS, WSP_FLAG_WELLSPRING4A), /* Macbook8 (unibody, March 2011) */ WSP_DEV(APPLE, WELLSPRING5_ANSI, WSP_FLAG_WELLSPRING5), WSP_DEV(APPLE, WELLSPRING5_ISO, WSP_FLAG_WELLSPRING5), WSP_DEV(APPLE, WELLSPRING5_JIS, WSP_FLAG_WELLSPRING5), /* MacbookAir4,1 (unibody, July 2011) */ WSP_DEV(APPLE, WELLSPRING6A_ANSI, WSP_FLAG_WELLSPRING6A), WSP_DEV(APPLE, WELLSPRING6A_ISO, WSP_FLAG_WELLSPRING6A), WSP_DEV(APPLE, WELLSPRING6A_JIS, WSP_FLAG_WELLSPRING6A), /* MacbookAir4,2 (unibody, July 2011) */ WSP_DEV(APPLE, WELLSPRING6_ANSI, WSP_FLAG_WELLSPRING6), WSP_DEV(APPLE, WELLSPRING6_ISO, WSP_FLAG_WELLSPRING6), WSP_DEV(APPLE, WELLSPRING6_JIS, WSP_FLAG_WELLSPRING6), /* Macbook8,2 (unibody) */ WSP_DEV(APPLE, WELLSPRING5A_ANSI, WSP_FLAG_WELLSPRING5A), WSP_DEV(APPLE, WELLSPRING5A_ISO, WSP_FLAG_WELLSPRING5A), WSP_DEV(APPLE, WELLSPRING5A_JIS, WSP_FLAG_WELLSPRING5A), /* MacbookPro10,1 (unibody, June 2012) */ /* MacbookPro11,1-3 (unibody, June 2013) */ WSP_DEV(APPLE, WELLSPRING7_ANSI, WSP_FLAG_WELLSPRING7), WSP_DEV(APPLE, WELLSPRING7_ISO, WSP_FLAG_WELLSPRING7), WSP_DEV(APPLE, WELLSPRING7_JIS, WSP_FLAG_WELLSPRING7), /* MacbookPro10,2 (unibody, October 2012) */ WSP_DEV(APPLE, WELLSPRING7A_ANSI, WSP_FLAG_WELLSPRING7A), WSP_DEV(APPLE, WELLSPRING7A_ISO, WSP_FLAG_WELLSPRING7A), WSP_DEV(APPLE, WELLSPRING7A_JIS, WSP_FLAG_WELLSPRING7A), /* MacbookAir6,2 (unibody, June 2013) */ WSP_DEV(APPLE, WELLSPRING8_ANSI, WSP_FLAG_WELLSPRING8), WSP_DEV(APPLE, WELLSPRING8_ISO, WSP_FLAG_WELLSPRING8), WSP_DEV(APPLE, WELLSPRING8_JIS, WSP_FLAG_WELLSPRING8), /* MacbookPro12,1 MacbookPro11,4 */ WSP_DEV(APPLE, WELLSPRING9_ANSI, WSP_FLAG_WELLSPRING9), WSP_DEV(APPLE, WELLSPRING9_ISO, WSP_FLAG_WELLSPRING9), WSP_DEV(APPLE, WELLSPRING9_JIS, WSP_FLAG_WELLSPRING9), }; #define WSP_FIFO_BUF_SIZE 8 /* bytes */ #define WSP_FIFO_QUEUE_MAXLEN 50 /* units */ enum { WSP_INTR_DT, WSP_N_TRANSFER, }; struct wsp_softc { struct usb_device *sc_usb_device; struct mtx sc_mutex; /* for synchronization */ struct usb_xfer *sc_xfer[WSP_N_TRANSFER]; struct usb_fifo_sc sc_fifo; const struct wsp_dev_params *sc_params; /* device configuration */ mousehw_t sc_hw; mousemode_t sc_mode; u_int sc_pollrate; mousestatus_t sc_status; u_int sc_state; #define WSP_ENABLED 0x01 struct tp_finger *index[MAX_FINGERS]; /* finger index data */ int16_t pos_x[MAX_FINGERS]; /* position array */ int16_t pos_y[MAX_FINGERS]; /* position array */ u_int sc_touch; /* touch status */ #define WSP_UNTOUCH 0x00 #define WSP_FIRST_TOUCH 0x01 #define WSP_SECOND_TOUCH 0x02 #define WSP_TOUCHING 0x04 int16_t pre_pos_x; /* previous position array */ int16_t pre_pos_y; /* previous position array */ int dx_sum; /* x axis cumulative movement */ int dy_sum; /* y axis cumulative movement */ int dz_sum; /* z axis cumulative movement */ int dz_count; #define WSP_DZ_MAX_COUNT 32 int dt_sum; /* T-axis cumulative movement */ int rdx; /* x axis remainder of divide by scale_factor */ int rdy; /* y axis remainder of divide by scale_factor */ int rdz; /* z axis remainder of divide by scale_factor */ int tp_datalen; uint8_t o_ntouch; /* old touch finger status */ uint8_t finger; /* 0 or 1 *, check which finger moving */ uint16_t intr_count; #define WSP_TAP_THRESHOLD 3 #define WSP_TAP_MAX_COUNT 20 int distance; /* the distance of 2 fingers */ #define MAX_DISTANCE 2500 /* the max allowed distance */ uint8_t ibtn; /* button status in tapping */ uint8_t ntaps; /* finger status in tapping */ uint8_t scr_mode; /* scroll status in movement */ #define WSP_SCR_NONE 0 #define WSP_SCR_VER 1 #define WSP_SCR_HOR 2 uint8_t tp_data[WSP_BUFFER_MAX] __aligned(4); /* trackpad transferred data */ }; /* * function prototypes */ static usb_fifo_cmd_t wsp_start_read; static usb_fifo_cmd_t wsp_stop_read; static usb_fifo_open_t wsp_open; static usb_fifo_close_t wsp_close; static usb_fifo_ioctl_t wsp_ioctl; static struct usb_fifo_methods wsp_fifo_methods = { .f_open = &wsp_open, .f_close = &wsp_close, .f_ioctl = &wsp_ioctl, .f_start_read = &wsp_start_read, .f_stop_read = &wsp_stop_read, .basename[0] = WSP_DRIVER_NAME, }; /* device initialization and shutdown */ static int wsp_enable(struct wsp_softc *sc); static void wsp_disable(struct wsp_softc *sc); /* updating fifo */ static void wsp_reset_buf(struct wsp_softc *sc); static void wsp_add_to_queue(struct wsp_softc *, int, int, int, uint32_t); /* Device methods. */ static device_probe_t wsp_probe; static device_attach_t wsp_attach; static device_detach_t wsp_detach; static usb_callback_t wsp_intr_callback; static const struct usb_config wsp_config[WSP_N_TRANSFER] = { [WSP_INTR_DT] = { .type = UE_INTERRUPT, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_IN, .flags = { .pipe_bof = 0, .short_xfer_ok = 1, }, .bufsize = WSP_BUFFER_MAX, .callback = &wsp_intr_callback, }, }; static usb_error_t wsp_set_device_mode(struct wsp_softc *sc, uint8_t on) { const struct wsp_dev_params *params = sc->sc_params; uint8_t mode_bytes[8]; usb_error_t err; /* Type 3 does not require a mode switch */ if (params->tp_type == TYPE3) return 0; err = usbd_req_get_report(sc->sc_usb_device, NULL, mode_bytes, params->um_size, params->iface_index, params->um_req_val, params->um_req_idx); if (err != USB_ERR_NORMAL_COMPLETION) { DPRINTF("Failed to read device mode (%d)\n", err); return (err); } /* * XXX Need to wait at least 250ms for hardware to get * ready. The device mode handling appears to be handled * asynchronously and we should not issue these commands too * quickly. */ pause("WHW", hz / 4); mode_bytes[params->um_switch_idx] = on ? params->um_switch_on : params->um_switch_off; return (usbd_req_set_report(sc->sc_usb_device, NULL, mode_bytes, params->um_size, params->iface_index, params->um_req_val, params->um_req_idx)); } static int wsp_enable(struct wsp_softc *sc) { /* reset status */ memset(&sc->sc_status, 0, sizeof(sc->sc_status)); sc->sc_state |= WSP_ENABLED; DPRINTFN(WSP_LLEVEL_INFO, "enabled wsp\n"); return (0); } static void wsp_disable(struct wsp_softc *sc) { sc->sc_state &= ~WSP_ENABLED; DPRINTFN(WSP_LLEVEL_INFO, "disabled wsp\n"); } static int wsp_probe(device_t self) { struct usb_attach_arg *uaa = device_get_ivars(self); struct usb_interface_descriptor *id; struct usb_interface *iface; uint8_t i; if (uaa->usb_mode != USB_MODE_HOST) return (ENXIO); /* figure out first interface matching */ for (i = 1;; i++) { iface = usbd_get_iface(uaa->device, i); if (iface == NULL || i == 3) return (ENXIO); id = iface->idesc; if ((id == NULL) || (id->bInterfaceClass != UICLASS_HID) || (id->bInterfaceProtocol != 0 && id->bInterfaceProtocol != UIPROTO_MOUSE)) continue; break; } /* check if we are attaching to the first match */ if (uaa->info.bIfaceIndex != i) return (ENXIO); return (usbd_lookup_id_by_uaa(wsp_devs, sizeof(wsp_devs), uaa)); } static int wsp_attach(device_t dev) { struct wsp_softc *sc = device_get_softc(dev); struct usb_attach_arg *uaa = device_get_ivars(dev); usb_error_t err; void *d_ptr = NULL; uint16_t d_len; DPRINTFN(WSP_LLEVEL_INFO, "sc=%p\n", sc); /* Get HID descriptor */ err = usbd_req_get_hid_desc(uaa->device, NULL, &d_ptr, &d_len, M_TEMP, uaa->info.bIfaceIndex); if (err == USB_ERR_NORMAL_COMPLETION) { /* Get HID report descriptor length */ sc->tp_datalen = hid_report_size(d_ptr, d_len, hid_input, NULL); free(d_ptr, M_TEMP); if (sc->tp_datalen <= 0 || sc->tp_datalen > WSP_BUFFER_MAX) { DPRINTF("Invalid datalength or too big " "datalength: %d\n", sc->tp_datalen); return (ENXIO); } } else { return (ENXIO); } sc->sc_usb_device = uaa->device; /* get device specific configuration */ sc->sc_params = wsp_dev_params + USB_GET_DRIVER_INFO(uaa); /* * By default the touchpad behaves like a HID device, sending * packets with reportID = 8. Such reports contain only * limited information. They encode movement deltas and button * events, but do not include data from the pressure * sensors. The device input mode can be switched from HID * reports to raw sensor data using vendor-specific USB * control commands: */ /* * During re-enumeration of the device we need to force the * device back into HID mode before switching it to RAW * mode. Else the device does not work like expected. */ err = wsp_set_device_mode(sc, 0); if (err != USB_ERR_NORMAL_COMPLETION) { DPRINTF("Failed to set mode to HID MODE (%d)\n", err); return (ENXIO); } err = wsp_set_device_mode(sc, 1); if (err != USB_ERR_NORMAL_COMPLETION) { DPRINTF("failed to set mode to RAW MODE (%d)\n", err); return (ENXIO); } mtx_init(&sc->sc_mutex, "wspmtx", NULL, MTX_DEF | MTX_RECURSE); err = usbd_transfer_setup(uaa->device, &uaa->info.bIfaceIndex, sc->sc_xfer, wsp_config, WSP_N_TRANSFER, sc, &sc->sc_mutex); if (err) { DPRINTF("error=%s\n", usbd_errstr(err)); goto detach; } if (usb_fifo_attach(sc->sc_usb_device, sc, &sc->sc_mutex, &wsp_fifo_methods, &sc->sc_fifo, device_get_unit(dev), -1, uaa->info.bIfaceIndex, UID_ROOT, GID_OPERATOR, 0644)) { goto detach; } device_set_usb_desc(dev); sc->sc_hw.buttons = 3; sc->sc_hw.iftype = MOUSE_IF_USB; sc->sc_hw.type = MOUSE_PAD; sc->sc_hw.model = MOUSE_MODEL_GENERIC; sc->sc_mode.protocol = MOUSE_PROTO_MSC; sc->sc_mode.rate = -1; sc->sc_mode.resolution = MOUSE_RES_UNKNOWN; sc->sc_mode.packetsize = MOUSE_MSC_PACKETSIZE; sc->sc_mode.syncmask[0] = MOUSE_MSC_SYNCMASK; sc->sc_mode.syncmask[1] = MOUSE_MSC_SYNC; sc->sc_touch = WSP_UNTOUCH; sc->scr_mode = WSP_SCR_NONE; return (0); detach: wsp_detach(dev); return (ENOMEM); } static int wsp_detach(device_t dev) { struct wsp_softc *sc = device_get_softc(dev); (void) wsp_set_device_mode(sc, 0); mtx_lock(&sc->sc_mutex); if (sc->sc_state & WSP_ENABLED) wsp_disable(sc); mtx_unlock(&sc->sc_mutex); usb_fifo_detach(&sc->sc_fifo); usbd_transfer_unsetup(sc->sc_xfer, WSP_N_TRANSFER); mtx_destroy(&sc->sc_mutex); return (0); } static void wsp_intr_callback(struct usb_xfer *xfer, usb_error_t error) { struct wsp_softc *sc = usbd_xfer_softc(xfer); const struct wsp_dev_params *params = sc->sc_params; struct usb_page_cache *pc; struct tp_finger *f; struct tp_header *h; struct wsp_tuning tun = wsp_tuning; int ntouch = 0; /* the finger number in touch */ int ibt = 0; /* button status */ int dx = 0; int dy = 0; int dz = 0; int rdx = 0; int rdy = 0; int rdz = 0; int len; int i; wsp_runing_rangecheck(&tun); if (sc->dz_count == 0) sc->dz_count = WSP_DZ_MAX_COUNT; usbd_xfer_status(xfer, &len, NULL, NULL, NULL); switch (USB_GET_STATE(xfer)) { case USB_ST_TRANSFERRED: /* copy out received data */ pc = usbd_xfer_get_frame(xfer, 0); usbd_copy_out(pc, 0, sc->tp_data, len); if ((len < params->tp_offset + params->tp_fsize) || ((len - params->tp_offset) % params->tp_fsize) != 0) { DPRINTFN(WSP_LLEVEL_INFO, "Invalid length: %d, %x, %x\n", len, sc->tp_data[0], sc->tp_data[1]); goto tr_setup; } if (len < sc->tp_datalen) { /* make sure we don't process old data */ memset(sc->tp_data + len, 0, sc->tp_datalen - len); } h = (struct tp_header *)(sc->tp_data); if (params->tp_type >= TYPE2) { ibt = sc->tp_data[params->tp_button]; ntouch = sc->tp_data[params->tp_button - 1]; } /* range check */ if (ntouch < 0) ntouch = 0; else if (ntouch > MAX_FINGERS) ntouch = MAX_FINGERS; for (i = 0; i != ntouch; i++) { f = (struct tp_finger *)(sc->tp_data + params->tp_offset + params->tp_delta + i * params->tp_fsize); /* swap endianness, if any */ if (le16toh(0x1234) != 0x1234) { f->origin = le16toh((uint16_t)f->origin); f->abs_x = le16toh((uint16_t)f->abs_x); f->abs_y = le16toh((uint16_t)f->abs_y); f->rel_x = le16toh((uint16_t)f->rel_x); f->rel_y = le16toh((uint16_t)f->rel_y); f->tool_major = le16toh((uint16_t)f->tool_major); f->tool_minor = le16toh((uint16_t)f->tool_minor); f->orientation = le16toh((uint16_t)f->orientation); f->touch_major = le16toh((uint16_t)f->touch_major); f->touch_minor = le16toh((uint16_t)f->touch_minor); f->pressure = le16toh((uint16_t)f->pressure); f->multi = le16toh((uint16_t)f->multi); } DPRINTFN(WSP_LLEVEL_INFO, "[%d]ibt=%d, taps=%d, o=%4d, ax=%5d, ay=%5d, " "rx=%5d, ry=%5d, tlmaj=%4d, tlmin=%4d, ot=%4x, " "tchmaj=%4d, tchmin=%4d, presure=%4d, m=%4x\n", i, ibt, ntouch, f->origin, f->abs_x, f->abs_y, f->rel_x, f->rel_y, f->tool_major, f->tool_minor, f->orientation, f->touch_major, f->touch_minor, f->pressure, f->multi); sc->pos_x[i] = f->abs_x; sc->pos_y[i] = -f->abs_y; sc->index[i] = f; } sc->sc_status.flags &= ~MOUSE_POSCHANGED; sc->sc_status.flags &= ~MOUSE_STDBUTTONSCHANGED; sc->sc_status.obutton = sc->sc_status.button; sc->sc_status.button = 0; if (ibt != 0) { if ((params->caps & HAS_INTEGRATED_BUTTON) && ntouch == 2) sc->sc_status.button |= MOUSE_BUTTON3DOWN; else if ((params->caps & HAS_INTEGRATED_BUTTON) && ntouch == 3) sc->sc_status.button |= MOUSE_BUTTON2DOWN; else sc->sc_status.button |= MOUSE_BUTTON1DOWN; sc->ibtn = 1; } sc->intr_count++; if (sc->ntaps < ntouch) { switch (ntouch) { case 1: if (sc->index[0]->touch_major > tun.pressure_tap_threshold && sc->index[0]->tool_major <= 1200) sc->ntaps = 1; break; case 2: if (sc->index[0]->touch_major > tun.pressure_tap_threshold-30 && sc->index[1]->touch_major > tun.pressure_tap_threshold-30) sc->ntaps = 2; break; case 3: if (sc->index[0]->touch_major > tun.pressure_tap_threshold-40 && sc->index[1]->touch_major > tun.pressure_tap_threshold-40 && sc->index[2]->touch_major > tun.pressure_tap_threshold-40) sc->ntaps = 3; break; default: break; } } if (ntouch == 2) { sc->distance = max(sc->distance, max( abs(sc->pos_x[0] - sc->pos_x[1]), abs(sc->pos_y[0] - sc->pos_y[1]))); } if (sc->index[0]->touch_major < tun.pressure_untouch_threshold && sc->sc_status.button == 0) { sc->sc_touch = WSP_UNTOUCH; if (sc->intr_count < WSP_TAP_MAX_COUNT && sc->intr_count > WSP_TAP_THRESHOLD && sc->ntaps && sc->ibtn == 0) { /* * Add a pair of events (button-down and * button-up). */ switch (sc->ntaps) { case 1: if (!(params->caps & HAS_INTEGRATED_BUTTON) || tun.enable_single_tap_clicks) { wsp_add_to_queue(sc, 0, 0, 0, MOUSE_BUTTON1DOWN); DPRINTFN(WSP_LLEVEL_INFO, "LEFT CLICK!\n"); } break; case 2: DPRINTFN(WSP_LLEVEL_INFO, "sum_x=%5d, sum_y=%5d\n", sc->dx_sum, sc->dy_sum); if (sc->distance < MAX_DISTANCE && abs(sc->dx_sum) < 5 && abs(sc->dy_sum) < 5) { wsp_add_to_queue(sc, 0, 0, 0, MOUSE_BUTTON3DOWN); DPRINTFN(WSP_LLEVEL_INFO, "RIGHT CLICK!\n"); } break; case 3: wsp_add_to_queue(sc, 0, 0, 0, MOUSE_BUTTON2DOWN); break; default: /* we don't handle taps of more than three fingers */ break; } wsp_add_to_queue(sc, 0, 0, 0, 0); /* button release */ } if ((sc->dt_sum / tun.scr_hor_threshold) != 0 && sc->ntaps == 2 && sc->scr_mode == WSP_SCR_HOR) { /* * translate T-axis into button presses * until further */ if (sc->dt_sum > 0) wsp_add_to_queue(sc, 0, 0, 0, 1UL << 3); else if (sc->dt_sum < 0) wsp_add_to_queue(sc, 0, 0, 0, 1UL << 4); } sc->dz_count = WSP_DZ_MAX_COUNT; sc->dz_sum = 0; sc->intr_count = 0; sc->ibtn = 0; sc->ntaps = 0; sc->finger = 0; sc->distance = 0; sc->dt_sum = 0; sc->dx_sum = 0; sc->dy_sum = 0; sc->rdx = 0; sc->rdy = 0; sc->rdz = 0; sc->scr_mode = WSP_SCR_NONE; } else if (sc->index[0]->touch_major >= tun.pressure_touch_threshold && sc->sc_touch == WSP_UNTOUCH) { /* ignore first touch */ sc->sc_touch = WSP_FIRST_TOUCH; } else if (sc->index[0]->touch_major >= tun.pressure_touch_threshold && sc->sc_touch == WSP_FIRST_TOUCH) { /* ignore second touch */ sc->sc_touch = WSP_SECOND_TOUCH; DPRINTFN(WSP_LLEVEL_INFO, "Fist pre_x=%5d, pre_y=%5d\n", sc->pre_pos_x, sc->pre_pos_y); } else { if (sc->sc_touch == WSP_SECOND_TOUCH) sc->sc_touch = WSP_TOUCHING; if (ntouch != 0 && sc->index[0]->touch_major >= tun.pressure_touch_threshold) { dx = sc->pos_x[0] - sc->pre_pos_x; dy = sc->pos_y[0] - sc->pre_pos_y; /* Ignore movement during button is releasing */ if (sc->ibtn != 0 && sc->sc_status.button == 0) dx = dy = 0; /* Ignore movement if ntouch changed */ if (sc->o_ntouch != ntouch) dx = dy = 0; /* Ignore unexpeted movement when typing */ if (ntouch == 1 && sc->index[0]->tool_major > 1200) dx = dy = 0; if (sc->ibtn != 0 && ntouch == 1 && sc->intr_count < WSP_TAP_MAX_COUNT && abs(sc->dx_sum) < 1 && abs(sc->dy_sum) < 1 ) dx = dy = 0; if (ntouch == 2 && sc->sc_status.button != 0) { dx = sc->pos_x[sc->finger] - sc->pre_pos_x; dy = sc->pos_y[sc->finger] - sc->pre_pos_y; /* * Ignore movement of switch finger or * movement from ibt=0 to ibt=1 */ if (sc->index[0]->origin == 0 || sc->index[1]->origin == 0 || sc->sc_status.obutton != sc->sc_status.button) { dx = dy = 0; sc->finger = 0; } if ((abs(sc->index[0]->rel_x) + abs(sc->index[0]->rel_y)) < (abs(sc->index[1]->rel_x) + abs(sc->index[1]->rel_y)) && sc->finger == 0) { sc->sc_touch = WSP_SECOND_TOUCH; dx = dy = 0; sc->finger = 1; } if ((abs(sc->index[0]->rel_x) + abs(sc->index[0]->rel_y)) >= (abs(sc->index[1]->rel_x) + abs(sc->index[1]->rel_y)) && sc->finger == 1) { sc->sc_touch = WSP_SECOND_TOUCH; dx = dy = 0; sc->finger = 0; } DPRINTFN(WSP_LLEVEL_INFO, "dx=%5d, dy=%5d, mov=%5d\n", dx, dy, sc->finger); } if (sc->dz_count--) { rdz = (dy + sc->rdz) % tun.scale_factor; sc->dz_sum -= (dy + sc->rdz) / tun.scale_factor; sc->rdz = rdz; } if ((sc->dz_sum / tun.z_factor) != 0) sc->dz_count = 0; } rdx = (dx + sc->rdx) % tun.scale_factor; dx = (dx + sc->rdx) / tun.scale_factor; sc->rdx = rdx; rdy = (dy + sc->rdy) % tun.scale_factor; dy = (dy + sc->rdy) / tun.scale_factor; sc->rdy = rdy; sc->dx_sum += dx; sc->dy_sum += dy; if (ntouch == 2 && sc->sc_status.button == 0) { if (sc->scr_mode == WSP_SCR_NONE && abs(sc->dx_sum) + abs(sc->dy_sum) > tun.scr_hor_threshold) sc->scr_mode = abs(sc->dx_sum) > abs(sc->dy_sum) * 2 ? WSP_SCR_HOR : WSP_SCR_VER; DPRINTFN(WSP_LLEVEL_INFO, "scr_mode=%5d, count=%d, dx_sum=%d, dy_sum=%d\n", sc->scr_mode, sc->intr_count, sc->dx_sum, sc->dy_sum); if (sc->scr_mode == WSP_SCR_HOR) sc->dt_sum += dx; else sc->dt_sum = 0; dx = dy = 0; if (sc->dz_count == 0) dz = sc->dz_sum / tun.z_factor; if (sc->scr_mode == WSP_SCR_HOR || abs(sc->pos_x[0] - sc->pos_x[1]) > MAX_DISTANCE || abs(sc->pos_y[0] - sc->pos_y[1]) > MAX_DISTANCE) dz = 0; } if (ntouch == 3) dx = dy = dz = 0; if (sc->intr_count < WSP_TAP_MAX_COUNT && abs(dx) < 3 && abs(dy) < 3 && abs(dz) < 3) dx = dy = dz = 0; else sc->intr_count = WSP_TAP_MAX_COUNT; if (dx || dy || dz) sc->sc_status.flags |= MOUSE_POSCHANGED; DPRINTFN(WSP_LLEVEL_INFO, "dx=%5d, dy=%5d, dz=%5d, sc_touch=%x, btn=%x\n", dx, dy, dz, sc->sc_touch, sc->sc_status.button); sc->sc_status.dx += dx; sc->sc_status.dy += dy; sc->sc_status.dz += dz; wsp_add_to_queue(sc, dx, -dy, dz, sc->sc_status.button); if (sc->dz_count == 0) { sc->dz_sum = 0; sc->rdz = 0; } } sc->pre_pos_x = sc->pos_x[0]; sc->pre_pos_y = sc->pos_y[0]; if (ntouch == 2 && sc->sc_status.button != 0) { sc->pre_pos_x = sc->pos_x[sc->finger]; sc->pre_pos_y = sc->pos_y[sc->finger]; } sc->o_ntouch = ntouch; case USB_ST_SETUP: tr_setup: /* check if we can put more data into the FIFO */ if (usb_fifo_put_bytes_max( sc->sc_fifo.fp[USB_FIFO_RX]) != 0) { usbd_xfer_set_frame_len(xfer, 0, sc->tp_datalen); usbd_transfer_submit(xfer); } break; default: /* Error */ if (error != USB_ERR_CANCELLED) { /* try clear stall first */ usbd_xfer_set_stall(xfer); goto tr_setup; } break; } } static void wsp_add_to_queue(struct wsp_softc *sc, int dx, int dy, int dz, uint32_t buttons_in) { uint32_t buttons_out; uint8_t buf[8]; dx = imin(dx, 254); dx = imax(dx, -256); dy = imin(dy, 254); dy = imax(dy, -256); dz = imin(dz, 126); dz = imax(dz, -128); buttons_out = MOUSE_MSC_BUTTONS; if (buttons_in & MOUSE_BUTTON1DOWN) buttons_out &= ~MOUSE_MSC_BUTTON1UP; else if (buttons_in & MOUSE_BUTTON2DOWN) buttons_out &= ~MOUSE_MSC_BUTTON2UP; else if (buttons_in & MOUSE_BUTTON3DOWN) buttons_out &= ~MOUSE_MSC_BUTTON3UP; /* Encode the mouse data in standard format; refer to mouse(4) */ buf[0] = sc->sc_mode.syncmask[1]; buf[0] |= buttons_out; buf[1] = dx >> 1; buf[2] = dy >> 1; buf[3] = dx - (dx >> 1); buf[4] = dy - (dy >> 1); /* Encode extra bytes for level 1 */ if (sc->sc_mode.level == 1) { buf[5] = dz >> 1; /* dz / 2 */ buf[6] = dz - (dz >> 1);/* dz - (dz / 2) */ buf[7] = (((~buttons_in) >> 3) & MOUSE_SYS_EXTBUTTONS); } usb_fifo_put_data_linear(sc->sc_fifo.fp[USB_FIFO_RX], buf, sc->sc_mode.packetsize, 1); } static void wsp_reset_buf(struct wsp_softc *sc) { /* reset read queue */ usb_fifo_reset(sc->sc_fifo.fp[USB_FIFO_RX]); } static void wsp_start_read(struct usb_fifo *fifo) { struct wsp_softc *sc = usb_fifo_softc(fifo); int rate; /* Check if we should override the default polling interval */ rate = sc->sc_pollrate; /* Range check rate */ if (rate > 1000) rate = 1000; /* Check for set rate */ if ((rate > 0) && (sc->sc_xfer[WSP_INTR_DT] != NULL)) { /* Stop current transfer, if any */ usbd_transfer_stop(sc->sc_xfer[WSP_INTR_DT]); /* Set new interval */ usbd_xfer_set_interval(sc->sc_xfer[WSP_INTR_DT], 1000 / rate); /* Only set pollrate once */ sc->sc_pollrate = 0; } usbd_transfer_start(sc->sc_xfer[WSP_INTR_DT]); } static void wsp_stop_read(struct usb_fifo *fifo) { struct wsp_softc *sc = usb_fifo_softc(fifo); usbd_transfer_stop(sc->sc_xfer[WSP_INTR_DT]); } static int wsp_open(struct usb_fifo *fifo, int fflags) { DPRINTFN(WSP_LLEVEL_INFO, "\n"); if (fflags & FREAD) { struct wsp_softc *sc = usb_fifo_softc(fifo); int rc; if (sc->sc_state & WSP_ENABLED) return (EBUSY); if (usb_fifo_alloc_buffer(fifo, WSP_FIFO_BUF_SIZE, WSP_FIFO_QUEUE_MAXLEN)) { return (ENOMEM); } rc = wsp_enable(sc); if (rc != 0) { usb_fifo_free_buffer(fifo); return (rc); } } return (0); } static void wsp_close(struct usb_fifo *fifo, int fflags) { if (fflags & FREAD) { struct wsp_softc *sc = usb_fifo_softc(fifo); wsp_disable(sc); usb_fifo_free_buffer(fifo); } } int wsp_ioctl(struct usb_fifo *fifo, u_long cmd, void *addr, int fflags) { struct wsp_softc *sc = usb_fifo_softc(fifo); mousemode_t mode; int error = 0; mtx_lock(&sc->sc_mutex); switch (cmd) { case MOUSE_GETHWINFO: *(mousehw_t *)addr = sc->sc_hw; break; case MOUSE_GETMODE: *(mousemode_t *)addr = sc->sc_mode; break; case MOUSE_SETMODE: mode = *(mousemode_t *)addr; if (mode.level == -1) /* Don't change the current setting */ ; else if ((mode.level < 0) || (mode.level > 1)) { error = EINVAL; goto done; } sc->sc_mode.level = mode.level; sc->sc_pollrate = mode.rate; sc->sc_hw.buttons = 3; if (sc->sc_mode.level == 0) { sc->sc_mode.protocol = MOUSE_PROTO_MSC; sc->sc_mode.packetsize = MOUSE_MSC_PACKETSIZE; sc->sc_mode.syncmask[0] = MOUSE_MSC_SYNCMASK; sc->sc_mode.syncmask[1] = MOUSE_MSC_SYNC; } else if (sc->sc_mode.level == 1) { sc->sc_mode.protocol = MOUSE_PROTO_SYSMOUSE; sc->sc_mode.packetsize = MOUSE_SYS_PACKETSIZE; sc->sc_mode.syncmask[0] = MOUSE_SYS_SYNCMASK; sc->sc_mode.syncmask[1] = MOUSE_SYS_SYNC; } wsp_reset_buf(sc); break; case MOUSE_GETLEVEL: *(int *)addr = sc->sc_mode.level; break; case MOUSE_SETLEVEL: if (*(int *)addr < 0 || *(int *)addr > 1) { error = EINVAL; goto done; } sc->sc_mode.level = *(int *)addr; sc->sc_hw.buttons = 3; if (sc->sc_mode.level == 0) { sc->sc_mode.protocol = MOUSE_PROTO_MSC; sc->sc_mode.packetsize = MOUSE_MSC_PACKETSIZE; sc->sc_mode.syncmask[0] = MOUSE_MSC_SYNCMASK; sc->sc_mode.syncmask[1] = MOUSE_MSC_SYNC; } else if (sc->sc_mode.level == 1) { sc->sc_mode.protocol = MOUSE_PROTO_SYSMOUSE; sc->sc_mode.packetsize = MOUSE_SYS_PACKETSIZE; sc->sc_mode.syncmask[0] = MOUSE_SYS_SYNCMASK; sc->sc_mode.syncmask[1] = MOUSE_SYS_SYNC; } wsp_reset_buf(sc); break; case MOUSE_GETSTATUS:{ mousestatus_t *status = (mousestatus_t *)addr; *status = sc->sc_status; sc->sc_status.obutton = sc->sc_status.button; sc->sc_status.button = 0; sc->sc_status.dx = 0; sc->sc_status.dy = 0; sc->sc_status.dz = 0; if (status->dx || status->dy || status->dz) status->flags |= MOUSE_POSCHANGED; if (status->button != status->obutton) status->flags |= MOUSE_BUTTONSCHANGED; break; } default: error = ENOTTY; } done: mtx_unlock(&sc->sc_mutex); return (error); } static device_method_t wsp_methods[] = { /* Device interface */ DEVMETHOD(device_probe, wsp_probe), DEVMETHOD(device_attach, wsp_attach), DEVMETHOD(device_detach, wsp_detach), DEVMETHOD_END }; static driver_t wsp_driver = { .name = WSP_DRIVER_NAME, .methods = wsp_methods, .size = sizeof(struct wsp_softc) }; static devclass_t wsp_devclass; DRIVER_MODULE(wsp, uhub, wsp_driver, wsp_devclass, NULL, 0); MODULE_DEPEND(wsp, usb, 1, 1, 1); MODULE_VERSION(wsp, 1); USB_PNP_HOST_INFO(wsp_devs);