/* $FreeBSD$ */ /* $NetBSD: ugensa.c,v 1.9.2.1 2007/03/24 14:55:50 yamt Exp $ */ /*- * SPDX-License-Identifier: BSD-2-Clause-NetBSD * * Copyright (c) 2004, 2005 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Roland C. Dowdeswell . * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * NOTE: all function names beginning like "ugensa_cfg_" can only * be called from within the config thread function ! */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "usbdevs.h" #define USB_DEBUG_VAR usb_debug #include #include #include #define UGENSA_BUF_SIZE 2048 /* bytes */ #define UGENSA_CONFIG_INDEX 0 #define UGENSA_IFACE_INDEX 0 #define UGENSA_IFACE_MAX 8 /* exclusivly */ #define UGENSA_PORT_MAX 8 /* exclusivly */ enum { UGENSA_BULK_DT_WR, UGENSA_BULK_DT_RD, UGENSA_N_TRANSFER, }; struct ugensa_sub_softc { struct ucom_softc *sc_ucom_ptr; struct usb_xfer *sc_xfer[UGENSA_N_TRANSFER]; }; struct ugensa_softc { struct ucom_super_softc sc_super_ucom; struct ucom_softc sc_ucom[UGENSA_PORT_MAX]; struct ugensa_sub_softc sc_sub[UGENSA_PORT_MAX]; struct mtx sc_mtx; uint8_t sc_nports; }; /* prototypes */ static device_probe_t ugensa_probe; static device_attach_t ugensa_attach; static device_detach_t ugensa_detach; static void ugensa_free_softc(struct ugensa_softc *); static usb_callback_t ugensa_bulk_write_callback; static usb_callback_t ugensa_bulk_read_callback; static void ugensa_free(struct ucom_softc *); static void ugensa_start_read(struct ucom_softc *); static void ugensa_stop_read(struct ucom_softc *); static void ugensa_start_write(struct ucom_softc *); static void ugensa_stop_write(struct ucom_softc *); static void ugensa_poll(struct ucom_softc *ucom); static const struct usb_config ugensa_xfer_config[UGENSA_N_TRANSFER] = { [UGENSA_BULK_DT_WR] = { .type = UE_BULK, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_OUT, .bufsize = UGENSA_BUF_SIZE, .flags = {.pipe_bof = 1,.force_short_xfer = 1,}, .callback = &ugensa_bulk_write_callback, }, [UGENSA_BULK_DT_RD] = { .type = UE_BULK, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_IN, .bufsize = UGENSA_BUF_SIZE, .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, .callback = &ugensa_bulk_read_callback, }, }; static const struct ucom_callback ugensa_callback = { .ucom_start_read = &ugensa_start_read, .ucom_stop_read = &ugensa_stop_read, .ucom_start_write = &ugensa_start_write, .ucom_stop_write = &ugensa_stop_write, .ucom_poll = &ugensa_poll, .ucom_free = &ugensa_free, }; static device_method_t ugensa_methods[] = { /* Device methods */ DEVMETHOD(device_probe, ugensa_probe), DEVMETHOD(device_attach, ugensa_attach), DEVMETHOD(device_detach, ugensa_detach), DEVMETHOD_END }; static devclass_t ugensa_devclass; static driver_t ugensa_driver = { .name = "ugensa", .methods = ugensa_methods, .size = sizeof(struct ugensa_softc), }; /* Driver-info is max number of serial ports per interface */ static const STRUCT_USB_HOST_ID ugensa_devs[] = { {USB_VPI(USB_VENDOR_AIRPRIME, USB_PRODUCT_AIRPRIME_PC5220, 1)}, {USB_VPI(USB_VENDOR_CMOTECH, USB_PRODUCT_CMOTECH_CDMA_MODEM1, 1)}, {USB_VPI(USB_VENDOR_KYOCERA2, USB_PRODUCT_KYOCERA2_CDMA_MSM_K, 1)}, {USB_VPI(USB_VENDOR_HP, USB_PRODUCT_HP_49GPLUS, 1)}, {USB_VPI(USB_VENDOR_NOVATEL2, USB_PRODUCT_NOVATEL2_FLEXPACKGPS, 3)}, {USB_VENDOR(USB_VENDOR_GOOGLE), USB_IFACE_CLASS(UICLASS_VENDOR), USB_IFACE_SUBCLASS(0x50), USB_IFACE_PROTOCOL(0x01), USB_DRIVER_INFO(10)}, }; DRIVER_MODULE(ugensa, uhub, ugensa_driver, ugensa_devclass, NULL, 0); MODULE_DEPEND(ugensa, ucom, 1, 1, 1); MODULE_DEPEND(ugensa, usb, 1, 1, 1); MODULE_VERSION(ugensa, 1); USB_PNP_HOST_INFO(ugensa_devs); static int ugensa_probe(device_t dev) { struct usb_attach_arg *uaa = device_get_ivars(dev); if (uaa->usb_mode != USB_MODE_HOST) { return (ENXIO); } if (uaa->info.bConfigIndex != UGENSA_CONFIG_INDEX) { return (ENXIO); } if (uaa->info.bIfaceIndex != 0) { return (ENXIO); } return (usbd_lookup_id_by_uaa(ugensa_devs, sizeof(ugensa_devs), uaa)); } static int ugensa_attach(device_t dev) { struct usb_attach_arg *uaa = device_get_ivars(dev); struct ugensa_softc *sc = device_get_softc(dev); struct ugensa_sub_softc *ssc; struct usb_interface *iface; struct usb_config xfer_config[UGENSA_N_TRANSFER]; int32_t error; uint8_t iface_index; int x, maxports; maxports = USB_GET_DRIVER_INFO(uaa); device_set_usb_desc(dev); mtx_init(&sc->sc_mtx, "ugensa", NULL, MTX_DEF); ucom_ref(&sc->sc_super_ucom); for (iface_index = UGENSA_IFACE_INDEX; iface_index < UGENSA_IFACE_MAX; iface_index++) { iface = usbd_get_iface(uaa->device, iface_index); if (iface == NULL || iface->idesc->bInterfaceClass != UICLASS_VENDOR) /* Not a serial port, most likely a SD reader */ continue; /* Loop over all endpoints pairwise */ for (x = 0; x < maxports && sc->sc_nports < UGENSA_PORT_MAX; x++) { ssc = sc->sc_sub + sc->sc_nports; ssc->sc_ucom_ptr = sc->sc_ucom + sc->sc_nports; memcpy(xfer_config, ugensa_xfer_config, sizeof ugensa_xfer_config); xfer_config[UGENSA_BULK_DT_RD].ep_index = x; xfer_config[UGENSA_BULK_DT_WR].ep_index = x; error = usbd_transfer_setup(uaa->device, &iface_index, ssc->sc_xfer, xfer_config, UGENSA_N_TRANSFER, ssc, &sc->sc_mtx); if (error) { if (x == 0) { device_printf(dev, "allocating USB " "transfers failed (%d)\n", error); goto detach; } break; } /* clear stall at first run */ mtx_lock(&sc->sc_mtx); usbd_xfer_set_stall(ssc->sc_xfer[UGENSA_BULK_DT_WR]); usbd_xfer_set_stall(ssc->sc_xfer[UGENSA_BULK_DT_RD]); mtx_unlock(&sc->sc_mtx); /* initialize port number */ ssc->sc_ucom_ptr->sc_portno = sc->sc_nports; if (iface_index != uaa->info.bIfaceIndex) { usbd_set_parent_iface(uaa->device, iface_index, uaa->info.bIfaceIndex); } sc->sc_nports++; } } device_printf(dev, "Found %d serial ports.\n", sc->sc_nports); error = ucom_attach(&sc->sc_super_ucom, sc->sc_ucom, sc->sc_nports, sc, &ugensa_callback, &sc->sc_mtx); if (error) { DPRINTF("ucom attach failed\n"); goto detach; } ucom_set_pnpinfo_usb(&sc->sc_super_ucom, dev); return (0); /* success */ detach: ugensa_detach(dev); return (ENXIO); /* failure */ } static int ugensa_detach(device_t dev) { struct ugensa_softc *sc = device_get_softc(dev); uint8_t x; ucom_detach(&sc->sc_super_ucom, sc->sc_ucom); for (x = 0; x < sc->sc_nports; x++) { usbd_transfer_unsetup(sc->sc_sub[x].sc_xfer, UGENSA_N_TRANSFER); } device_claim_softc(dev); ugensa_free_softc(sc); return (0); } UCOM_UNLOAD_DRAIN(ugensa); static void ugensa_free_softc(struct ugensa_softc *sc) { if (ucom_unref(&sc->sc_super_ucom)) { mtx_destroy(&sc->sc_mtx); device_free_softc(sc); } } static void ugensa_free(struct ucom_softc *ucom) { ugensa_free_softc(ucom->sc_parent); } static void ugensa_bulk_write_callback(struct usb_xfer *xfer, usb_error_t error) { struct ugensa_sub_softc *ssc = usbd_xfer_softc(xfer); struct usb_page_cache *pc; uint32_t actlen; switch (USB_GET_STATE(xfer)) { case USB_ST_SETUP: case USB_ST_TRANSFERRED: tr_setup: pc = usbd_xfer_get_frame(xfer, 0); if (ucom_get_data(ssc->sc_ucom_ptr, pc, 0, UGENSA_BUF_SIZE, &actlen)) { usbd_xfer_set_frame_len(xfer, 0, actlen); usbd_transfer_submit(xfer); } return; default: /* Error */ if (error != USB_ERR_CANCELLED) { /* try to clear stall first */ usbd_xfer_set_stall(xfer); goto tr_setup; } return; } } static void ugensa_bulk_read_callback(struct usb_xfer *xfer, usb_error_t error) { struct ugensa_sub_softc *ssc = usbd_xfer_softc(xfer); struct usb_page_cache *pc; int actlen; usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); switch (USB_GET_STATE(xfer)) { case USB_ST_TRANSFERRED: pc = usbd_xfer_get_frame(xfer, 0); ucom_put_data(ssc->sc_ucom_ptr, pc, 0, actlen); case USB_ST_SETUP: tr_setup: usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); usbd_transfer_submit(xfer); return; default: /* Error */ if (error != USB_ERR_CANCELLED) { /* try to clear stall first */ usbd_xfer_set_stall(xfer); goto tr_setup; } return; } } static void ugensa_start_read(struct ucom_softc *ucom) { struct ugensa_softc *sc = ucom->sc_parent; struct ugensa_sub_softc *ssc = sc->sc_sub + ucom->sc_portno; usbd_transfer_start(ssc->sc_xfer[UGENSA_BULK_DT_RD]); } static void ugensa_stop_read(struct ucom_softc *ucom) { struct ugensa_softc *sc = ucom->sc_parent; struct ugensa_sub_softc *ssc = sc->sc_sub + ucom->sc_portno; usbd_transfer_stop(ssc->sc_xfer[UGENSA_BULK_DT_RD]); } static void ugensa_start_write(struct ucom_softc *ucom) { struct ugensa_softc *sc = ucom->sc_parent; struct ugensa_sub_softc *ssc = sc->sc_sub + ucom->sc_portno; usbd_transfer_start(ssc->sc_xfer[UGENSA_BULK_DT_WR]); } static void ugensa_stop_write(struct ucom_softc *ucom) { struct ugensa_softc *sc = ucom->sc_parent; struct ugensa_sub_softc *ssc = sc->sc_sub + ucom->sc_portno; usbd_transfer_stop(ssc->sc_xfer[UGENSA_BULK_DT_WR]); } static void ugensa_poll(struct ucom_softc *ucom) { struct ugensa_softc *sc = ucom->sc_parent; struct ugensa_sub_softc *ssc = sc->sc_sub + ucom->sc_portno; usbd_transfer_poll(ssc->sc_xfer, UGENSA_N_TRANSFER); }