/* $NetBSD: pcai2cmux.c,v 1.9 2022/07/20 22:58:35 thorpej Exp $ */ /*- * Copyright (c) 2020 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Jason R. Thorpe. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #if defined(__i386__) || defined(__amd64__) || defined(__aarch64__) #include "acpica.h" #endif #include __KERNEL_RCSID(0, "$NetBSD: pcai2cmux.c,v 1.9 2022/07/20 22:58:35 thorpej Exp $"); /* * Driver for NXP PCA954x / PCA984x I2C switches and multiplexers. * * There are two flavors of this device: * * - Multiplexers, which connect the upstream bus to one downstream bus * at a time. * * - Switches, which can connect the upstream bus to one or more downstream * busses at a time (which is useful when using an all-call address for * a large array of PCA9685 LED controllers, for example). * * Alas, the device tree bindings don't have anything specifically for * switches, so we treat the switch variants as basic multiplexers, * only enabling one downstream bus at a time. * * Note that some versions of these chips also have interrupt mux * capability. XXX We do not support this yet. */ #include #include #include #include #include #if NACPICA > 0 #include #endif /* There are a maximum of 8 busses supported. */ #define PCAIICMUX_MAX_BUSSES 8 struct pcaiicmux_type { unsigned int nchannels; /* # of downstream channels */ uint8_t enable_bit; /* if 0, chip is switch type */ }; static const struct pcaiicmux_type mux2_type = { .nchannels = 2, .enable_bit = __BIT(2), }; static const struct pcaiicmux_type switch2_type = { .nchannels = 2, .enable_bit = 0, }; static const struct pcaiicmux_type mux4_type = { .nchannels = 4, .enable_bit = __BIT(2), }; static const struct pcaiicmux_type switch4_type = { .nchannels = 4, .enable_bit = 0, }; static const struct pcaiicmux_type mux8_type = { .nchannels = 8, .enable_bit = __BIT(3), }; static const struct pcaiicmux_type switch8_type = { .nchannels = 8, .enable_bit = 0, }; static const struct device_compatible_entry compat_data[] = { /* PCA9540 - 2 channel i2c mux */ { .compat = "nxp,pca9540", .data = &mux2_type }, /* PCA9542 - 2 channel i2c mux with interrupts */ { .compat = "nxp,pca9542", .data = &mux2_type }, /* PCA9543 - 2 channel i2c switch with interrupts */ { .compat = "nxp,pca9543", .data = &switch2_type }, /* PCA9544 - 4 channel i2c mux with interrupts */ { .compat = "nxp,pca9544", .data = &mux4_type }, /* PCA9545 - 4 channel i2c switch with interrupts */ { .compat = "nxp,pca9545", .data = &switch4_type }, /* PCA9546 - 4 channel i2c switch */ { .compat = "nxp,pca9546", .data = &switch4_type }, /* PCA9547 - 8 channel i2c mux */ { .compat = "nxp,pca9547", .data = &mux8_type }, { .compat = "NXP0002", .data = &mux8_type }, /* PCA9548 - 8 channel i2c switch */ { .compat = "nxp,pca9548", .data = &switch8_type }, /* PCA9846 - 4 channel i2c switch */ { .compat = "nxp,pca9846", .data = &switch4_type }, /* PCA9847 - 8 channel i2c mux */ { .compat = "nxp,pca9847", .data = &mux8_type }, /* PCA9848 - 8 channel i2c switch */ { .compat = "nxp,pca9848", .data = &switch8_type }, /* PCA9849 - 4 channel i2c mux */ { .compat = "nxp,pca9849", .data = &mux4_type }, DEVICE_COMPAT_EOL }; struct pcaiicmux_softc { struct iicmux_softc sc_iicmux; i2c_addr_t sc_addr; int sc_cur_value; const struct pcaiicmux_type *sc_type; struct fdtbus_gpio_pin *sc_reset_gpio; bool sc_idle_disconnect; struct pcaiicmux_bus_info { uint8_t enable_value; } sc_bus_info[PCAIICMUX_MAX_BUSSES]; }; static int pcaiicmux_write(struct pcaiicmux_softc * const sc, uint8_t const val, int const flags) { if ((int)val == sc->sc_cur_value) { return 0; } sc->sc_cur_value = (int)val; int const error = iic_smbus_send_byte(sc->sc_iicmux.sc_i2c_parent, sc->sc_addr, val, flags & ~I2C_F_SPEED); if (error) { sc->sc_cur_value = -1; } return error; } /*****************************************************************************/ static void * pcaiicmux_get_mux_info(struct iicmux_softc * const iicmux) { return container_of(iicmux, struct pcaiicmux_softc, sc_iicmux); } static void * pcaiicmux_get_bus_info(struct iicmux_bus * const bus) { struct iicmux_softc * const iicmux = bus->mux; struct pcaiicmux_softc * const sc = iicmux->sc_mux_data; bus_addr_t addr; int error; if (bus->busidx >= sc->sc_type->nchannels) { aprint_error_dev(iicmux->sc_dev, "device tree error: bus index %d out of range\n", bus->busidx); return NULL; } struct pcaiicmux_bus_info * const bus_info = &sc->sc_bus_info[bus->busidx]; switch (bus->handletype) { case I2C_COOKIE_OF: error = fdtbus_get_reg(bus->handle, 0, &addr, NULL); if (error) { aprint_error_dev(iicmux->sc_dev, "unable to get reg property for bus %d\n", bus->busidx); return NULL; } break; #if NACPICA > 0 case I2C_COOKIE_ACPI: { ACPI_INTEGER val; ACPI_STATUS rv; rv = acpi_eval_integer((ACPI_HANDLE)bus->handle, "_ADR", &val); if (ACPI_FAILURE(rv)) { aprint_error_dev(iicmux->sc_dev, "unable to evaluate _ADR for bus %d: %s\n", bus->busidx, AcpiFormatException(rv)); return NULL; } addr = (bus_addr_t)val; } break; #endif default: aprint_error_dev(iicmux->sc_dev, "unsupported handle type\n"); return NULL; } if (addr >= sc->sc_type->nchannels) { aprint_error_dev(iicmux->sc_dev, "device tree error: reg property %llu out of range\n", (unsigned long long)addr); return NULL; } /* * If it's a mux type, the enable value is the channel number * (from the reg property) OR'd with the enable bit. * * If it's a switch type, the enable value is 1 << channel number * (from the reg property). */ if (sc->sc_type->enable_bit) { bus_info->enable_value = (uint8_t)addr | sc->sc_type->enable_bit; } else { bus_info->enable_value = 1 << addr; } return bus_info; } static int pcaiicmux_acquire_bus(struct iicmux_bus * const bus, int const flags) { struct pcaiicmux_softc * const sc = bus->mux->sc_mux_data; struct pcaiicmux_bus_info * const bus_info = bus->bus_data; int error; error = pcaiicmux_write(sc, bus_info->enable_value, flags); if (error) { printf("%s: %s: pcaiicmux_write failed (error = %d)\n", device_xname(sc->sc_iicmux.sc_dev), __func__, error); } return error; } static void pcaiicmux_release_bus(struct iicmux_bus * const bus, int const flags) { struct pcaiicmux_softc * const sc = bus->mux->sc_mux_data; if (sc->sc_idle_disconnect) { int error; error = pcaiicmux_write(sc, 0, flags); if (error) { printf("%s: %s: pcaiicmux_write failed (error = %d)\n", device_xname(sc->sc_iicmux.sc_dev), __func__, error); } } } static const struct iicmux_config pcaiicmux_config = { .desc = "PCA954x", .get_mux_info = pcaiicmux_get_mux_info, .get_bus_info = pcaiicmux_get_bus_info, .acquire_bus = pcaiicmux_acquire_bus, .release_bus = pcaiicmux_release_bus, }; /*****************************************************************************/ static const struct pcaiicmux_type * pcaiicmux_type_by_compat(const struct i2c_attach_args * const ia) { const struct pcaiicmux_type *type = NULL; const struct device_compatible_entry *dce; if ((dce = iic_compatible_lookup(ia, compat_data)) != NULL) type = dce->data; return type; } static int pcaiicmux_match(device_t parent, cfdata_t cf, void *aux) { struct i2c_attach_args * const ia = aux; int match_result; if (iic_use_direct_match(ia, cf, compat_data, &match_result)) { return match_result; } /* This device is direct-config only. */ return 0; } static void pcaiicmux_attach(device_t parent, device_t self, void *aux) { struct pcaiicmux_softc * const sc = device_private(self); struct i2c_attach_args * const ia = aux; int error; sc->sc_iicmux.sc_dev = self; sc->sc_iicmux.sc_handle = ia->ia_cookie; sc->sc_iicmux.sc_handletype = ia->ia_cookietype; sc->sc_iicmux.sc_config = &pcaiicmux_config; sc->sc_iicmux.sc_i2c_parent = ia->ia_tag; sc->sc_addr = ia->ia_addr; sc->sc_type = pcaiicmux_type_by_compat(ia); KASSERT(sc->sc_type != NULL); aprint_naive("\n"); aprint_normal(": PCA954x I2C %s\n", sc->sc_type->enable_bit ? "mux" : "switch"); if (ia->ia_cookietype == I2C_COOKIE_OF) { const int phandle = (int)ia->ia_cookie; if (of_hasprop(phandle, "i2c-mux-idle-disconnect")) { sc->sc_idle_disconnect = true; } /* Reset the mux if a reset GPIO is specified. */ sc->sc_reset_gpio = fdtbus_gpio_acquire(phandle, "reset-gpios", GPIO_PIN_OUTPUT); if (sc->sc_reset_gpio) { fdtbus_gpio_write(sc->sc_reset_gpio, 1); delay(10); fdtbus_gpio_write(sc->sc_reset_gpio, 0); delay(10); } } /* Force the mux into a disconnected state. */ sc->sc_cur_value = -1; error = iic_acquire_bus(ia->ia_tag, 0); if (error) { aprint_error_dev(self, "failed to acquire I2C bus (error = %d)\n", error); return; } error = pcaiicmux_write(sc, 0, 0); iic_release_bus(ia->ia_tag, 0); if (error) { aprint_error_dev(self, "failed to set mux to disconnected state (error = %d)\n", error); return; } iicmux_attach(&sc->sc_iicmux); } CFATTACH_DECL_NEW(pcaiicmux, sizeof(struct pcaiicmux_softc), pcaiicmux_match, pcaiicmux_attach, NULL, NULL);