The Expat XML Parser Release 2.6.4

Expat is a library, written in C, for parsing XML documents. It's the underlying XML parser for the open source Mozilla project, Perl's XML::Parser, Python's xml.parsers.expat, and other open-source XML parsers.

This library is the creation of James Clark, who's also given us groff (an nroff look-alike), Jade (an implementation of ISO's DSSSL stylesheet language for SGML), XP (a Java XML parser package), XT (a Java XSL engine). James was also the technical lead on the XML Working Group at W3C that produced the XML specification.

This is free software, licensed under the MIT/X Consortium license. You may download it from the Expat home page.

The bulk of this document was originally commissioned as an article by XML.com. They graciously allowed Clark Cooper to retain copyright and to distribute it with Expat. This version has been substantially extended to include documentation on features which have been added since the original article was published, and additional information on using the original interface.

Table of Contents

• Overview
• Building and Installing
• Using Expat
• Reference
  • Parser Creation Functions
    • XML_ParserCreate
    • XML_ParserCreateNS
    • XML_ParserCreate_MM
    • XML_ExternalEntityParserCreate
    • XML_ParserFree
    • XML_ParserReset
  • Parsing Functions
    • XML_Parse
    • XML_ParseBuffer
    • XML_GetBuffer
    • XML_StopParser
    • XML_ResumeParser
    • XML_GetParsingStatus
  • Handler Setting Functions
    • XML_SetStartElementHandler
    • XML_SetEndElementHandler
    • XML_SetElementHandler
    • XML_SetCharacterDataHandler
    • XML_SetProcessingInstructionHandler
    • XML_SetCommentHandler
    • XML_SetStartCdataSectionHandler
    • XML_SetEndCdataSectionHandler
    • XML_SetCdataSectionHandler
    • XML_SetDefaultHandler
    • XML_SetDefaultHandlerExpand
    • XML_SetExternalEntityRefHandler
    • XML_SetExternalEntityRefHandlerArg
    • XML_SetSkippedEntityHandler
    • XML_SetUnknownEncodingHandler
    • XML_SetStartNamespaceDeclHandler
    • XML_SetEndNamespaceDeclHandler
    • XML_SetNamespaceDeclHandler
    • XML_SetXmlDeclHandler
    • XML_SetStartDoctypeDeclHandler
    • XML_SetEndDoctypeDeclHandler
    • XML_SetDoctypeDeclHandler
    • XML_SetElementDeclHandler
    • XML_SetAttlistDeclHandler
    • XML_SetEntityDeclHandler
    • XML_SetUnparsedEntityDeclHandler
    • XML_SetNotationDeclHandler
    • XML_SetNotStandaloneHandler
  • Parse Position and Error Reporting Functions
    • XML_GetErrorCode
    • XML_ErrorString
    • XML_GetCurrentByteIndex
    • XML_GetCurrentLineNumber
    • XML_GetCurrentColumnNumber
    • XML_GetCurrentByteCount
    • XML_GetInputContext
  • Attack Protection
    • XML_SetBillionLaughsAttackProtectionMaximumAmplification
    • XML_SetBillionLaughsAttackProtectionActivationThreshold
    • XML_SetReparseDeferralEnabled
  • Miscellaneous Functions
    • XML_SetUserData
    • XML_GetUserData
    • XML_UseParserAsHandlerArg
    • XML_SetBase
    • XML_GetBase
    • XML_GetSpecifiedAttributeCount
    • XML_GetIdAttributeIndex
    • XML_GetAttributeInfo
    • XML_SetEncoding
    • XML_SetParamEntityParsing
    • XML_SetHashSalt
    • XML_UseForeignDTD
    • XML_SetReturnNSTriplet
    • XML_DefaultCurrent
    • XML_ExpatVersion
    • XML_ExpatVersionInfo
    • XML_GetFeatureList
    • XML_FreeContentModel
    • XML_MemMalloc
    • XML_MemRealloc
    • XML_MemFree

Overview

Expat is a stream-oriented parser. You register callback (or handler) functions with the parser and then start feeding it the document. As the parser recognizes parts of the document, it will call the appropriate handler for that part (if you've registered one.) The document is fed to the parser in pieces, so you can start parsing before you have all the document. This also allows you to parse really huge documents that won't fit into memory.

Expat can be intimidating due to the many kinds of handlers and options you can set. But you only need to learn four functions in order to do 90% of what you'll want to do with it:

XML_ParserCreate

Create a new parser object.

XML_SetElementHandler

Set handlers for start and end tags.

XML_SetCharacterDataHandler

Set handler for text.

XML_Parse

Pass a buffer full of document to the parser

These functions and others are described in the reference part of this document. The reference section also describes in detail the parameters passed to the different types of handlers.

Let's look at a very simple example program that only uses 3 of the above functions (it doesn't need to set a character handler.) The program outline.c prints an element outline, indenting child elements to distinguish them from the parent element that contains them. The start handler does all the work. It prints two indenting spaces for every level of ancestor elements, then it prints the element and attribute information. Finally it increments the global Depth variable.

int Depth;

void XMLCALL
start(void *data, const char *el, const char **attr) {
  int i;

  for (i = 0; i < Depth; i++)
    printf("  ");

  printf("%s", el);

  for (i = 0; attr[i]; i += 2) {
    printf(" %s='%s'", attr[i], attr[i + 1]);
  }

  printf("\n");
  Depth++;
}  /* End of start handler */

The end tag simply does the bookkeeping work of decrementing Depth.

void XMLCALL
end(void *data, const char *el) {
  Depth--;
}  /* End of end handler */

Note the XMLCALL annotation used for the callbacks. This is used to ensure that the Expat and the callbacks are using the same calling convention in case the compiler options used for Expat itself and the client code are different. Expat tries not to care what the default calling convention is, though it may require that it be compiled with a default convention of "cdecl" on some platforms. For code which uses Expat, however, the calling convention is specified by the XMLCALL annotation on most platforms; callbacks should be defined using this annotation.

The XMLCALL annotation was added in Expat 1.95.7, but existing working Expat applications don't need to add it (since they are already using the "cdecl" calling convention, or they wouldn't be working). The annotation is only needed if the default calling convention may be something other than "cdecl". To use the annotation safely with older versions of Expat, you can conditionally define it after including Expat's header file:

#include <expat.h>

#ifndef XMLCALL
#if defined(_MSC_EXTENSIONS) && !defined(__BEOS__) && !defined(__CYGWIN__)
#define XMLCALL __cdecl
#elif defined(__GNUC__)
#define XMLCALL __attribute__((cdecl))
#else
#define XMLCALL
#endif
#endif

After creating the parser, the main program just has the job of shoveling the document to the parser so that it can do its work.

Building and Installing Expat

The Expat distribution comes as a compressed (with GNU gzip) tar file. You may download the latest version from Source Forge. After unpacking this, cd into the directory. Then follow either the Win32 directions or Unix directions below.

Building under Win32

If you're using the GNU compiler under cygwin, follow the Unix directions in the next section. Otherwise if you have Microsoft's Developer Studio installed, you can use CMake to generate a .sln file, e.g. cmake -G"Visual Studio 16 2019" -DCMAKE_BUILD_TYPE=RelWithDebInfo . , and build Expat using msbuild /m expat.sln after.

Alternatively, you may download the Win32 binary package that contains the "expat.h" include file and a pre-built DLL.

Building under Unix (or GNU)

First you'll need to run the configure shell script in order to configure the Makefiles and headers for your system.

If you're happy with all the defaults that configure picks for you, and you have permission on your system to install into /usr/local, you can install Expat with this sequence of commands:

./configure
make
make install

There are some options that you can provide to this script, but the only one we'll mention here is the --prefix option. You can find out all the options available by running configure with just the --help option.

By default, the configure script sets things up so that the library gets installed in /usr/local/lib and the associated header file in /usr/local/include. But if you were to give the option, --prefix=/home/me/mystuff, then the library and header would get installed in /home/me/mystuff/lib and /home/me/mystuff/include respectively.

Configuring Expat Using the Pre-Processor

Expat's feature set can be configured using a small number of pre-processor definitions. The symbols are:

XML_GE

Added in Expat 2.6.0. Include support for general entities (syntax &e1; to reference and syntax <!ENTITY e1 'value1'> (an internal general entity) or <!ENTITY e2 SYSTEM 'file2'> (an external general entity) to declare). With XML_GE enabled, general entities will be replaced by their declared replacement text; for this to work for external general entities, in addition an XML_ExternalEntityRefHandler must be set using XML_SetExternalEntityRefHandler. Also, enabling XML_GE makes the functions XML_SetBillionLaughsAttackProtectionMaximumAmplification and XML_SetBillionLaughsAttackProtectionActivationThreshold available.
With XML_GE disabled, Expat has a smaller memory footprint and can be faster, but will not load external general entities and will replace all general entities (except the predefined five: amp, apos, gt, lt, quot) with a self-reference: for example, referencing an entity e1 via &e1; will be replaced by text &e1;.

XML_DTD

Include support for using and reporting DTD-based content. If this is defined, default attribute values from an external DTD subset are reported and attribute value normalization occurs based on the type of attributes defined in the external subset. Without this, Expat has a smaller memory footprint and can be faster, but will not load external parameter entities or process conditional sections. If defined, makes the functions XML_SetBillionLaughsAttackProtectionMaximumAmplification and XML_SetBillionLaughsAttackProtectionActivationThreshold available.

XML_NS

When defined, support for the Namespaces in XML specification is included.

XML_UNICODE

When defined, character data reported to the application is encoded in UTF-16 using wide characters of the type XML_Char. This is implied if XML_UNICODE_WCHAR_T is defined.

XML_UNICODE_WCHAR_T

If defined, causes the XML_Char character type to be defined using the wchar_t type; otherwise, unsigned short is used. Defining this implies XML_UNICODE.

XML_LARGE_SIZE

If defined, causes the XML_Size and XML_Index integer types to be at least 64 bits in size. This is intended to support processing of very large input streams, where the return values of XML_GetCurrentByteIndex, XML_GetCurrentLineNumber and XML_GetCurrentColumnNumber could overflow. It may not be supported by all compilers, and is turned off by default.

XML_CONTEXT_BYTES

The number of input bytes of markup context which the parser will ensure are available for reporting via XML_GetInputContext. This is normally set to 1024, and must be set to a positive integer to enable. If this is set to zero, the input context will not be available and XML_GetInputContext will always report NULL. Without this, Expat has a smaller memory footprint and can be faster.

XML_STATIC

On Windows, this should be set if Expat is going to be linked statically with the code that calls it; this is required to get all the right MSVC magic annotations correct. This is ignored on other platforms.

XML_ATTR_INFO

If defined, makes the additional function XML_GetAttributeInfo available for reporting attribute byte offsets.

Using Expat

Compiling and Linking Against Expat

Unless you installed Expat in a location not expected by your compiler and linker, all you have to do to use Expat in your programs is to include the Expat header (#include <expat.h>) in your files that make calls to it and to tell the linker that it needs to link against the Expat library. On Unix systems, this would usually be done with the -lexpat argument. Otherwise, you'll need to tell the compiler where to look for the Expat header and the linker where to find the Expat library. You may also need to take steps to tell the operating system where to find this library at run time.

On a Unix-based system, here's what a Makefile might look like when Expat is installed in a standard location:

CC=cc
LDFLAGS=
LIBS= -lexpat
xmlapp: xmlapp.o
        $(CC) $(LDFLAGS) -o xmlapp xmlapp.o $(LIBS)

If you installed Expat in, say, /home/me/mystuff, then the Makefile would look like this:

CC=cc
CFLAGS= -I/home/me/mystuff/include
LDFLAGS=
LIBS= -L/home/me/mystuff/lib -lexpat
xmlapp: xmlapp.o
        $(CC) $(LDFLAGS) -o xmlapp xmlapp.o $(LIBS)

You'd also have to set the environment variable LD_LIBRARY_PATH to /home/me/mystuff/lib (or to ${LD_LIBRARY_PATH}:/home/me/mystuff/lib if LD_LIBRARY_PATH already has some directories in it) in order to run your application.

Expat Basics

As we saw in the example in the overview, the first step in parsing an XML document with Expat is to create a parser object. There are three functions in the Expat API for creating a parser object. However, only two of these (XML_ParserCreate and XML_ParserCreateNS) can be used for constructing a parser for a top-level document. The object returned by these functions is an opaque pointer (i.e. "expat.h" declares it as void *) to data with further internal structure. In order to free the memory associated with this object you must call XML_ParserFree. Note that if you have provided any user data that gets stored in the parser, then your application is responsible for freeing it prior to calling XML_ParserFree.

The objects returned by the parser creation functions are good for parsing only one XML document or external parsed entity. If your application needs to parse many XML documents, then it needs to create a parser object for each one. The best way to deal with this is to create a higher level object that contains all the default initialization you want for your parser objects.

Walking through a document hierarchy with a stream oriented parser will require a good stack mechanism in order to keep track of current context. For instance, to answer the simple question, "What element does this text belong to?" requires a stack, since the parser may have descended into other elements that are children of the current one and has encountered this text on the way out.

The things you're likely to want to keep on a stack are the currently opened element and it's attributes. You push this information onto the stack in the start handler and you pop it off in the end handler.

For some tasks, it is sufficient to just keep information on what the depth of the stack is (or would be if you had one.) The outline program shown above presents one example. Another such task would be skipping over a complete element. When you see the start tag for the element you want to skip, you set a skip flag and record the depth at which the element started. When the end tag handler encounters the same depth, the skipped element has ended and the flag may be cleared. If you follow the convention that the root element starts at 1, then you can use the same variable for skip flag and skip depth.

void
init_info(Parseinfo *info) {
  info->skip = 0;
  info->depth = 1;
  /* Other initializations here */
}  /* End of init_info */

void XMLCALL
rawstart(void *data, const char *el, const char **attr) {
  Parseinfo *inf = (Parseinfo *) data;

  if (! inf->skip) {
    if (should_skip(inf, el, attr)) {
      inf->skip = inf->depth;
    }
    else
      start(inf, el, attr);     /* This does rest of start handling */
  }

  inf->depth++;
}  /* End of rawstart */

void XMLCALL
rawend(void *data, const char *el) {
  Parseinfo *inf = (Parseinfo *) data;

  inf->depth--;

  if (! inf->skip)
    end(inf, el);              /* This does rest of end handling */

  if (inf->skip == inf->depth)
    inf->skip = 0;
}  /* End rawend */

Notice in the above example the difference in how depth is manipulated in the start and end handlers. The end tag handler should be the mirror image of the start tag handler. This is necessary to properly model containment. Since, in the start tag handler, we incremented depth after the main body of start tag code, then in the end handler, we need to manipulate it before the main body. If we'd decided to increment it first thing in the start handler, then we'd have had to decrement it last thing in the end handler.

Communicating between handlers

In order to be able to pass information between different handlers without using globals, you'll need to define a data structure to hold the shared variables. You can then tell Expat (with the XML_SetUserData function) to pass a pointer to this structure to the handlers. This is the first argument received by most handlers. In the reference section, an argument to a callback function is named userData and have type void * if the user data is passed; it will have the type XML_Parser if the parser itself is passed. When the parser is passed, the user data may be retrieved using XML_GetUserData.

One common case where multiple calls to a single handler may need to communicate using an application data structure is the case when content passed to the character data handler (set by XML_SetCharacterDataHandler) needs to be accumulated. A common first-time mistake with any of the event-oriented interfaces to an XML parser is to expect all the text contained in an element to be reported by a single call to the character data handler. Expat, like many other XML parsers, reports such data as a sequence of calls; there's no way to know when the end of the sequence is reached until a different callback is made. A buffer referenced by the user data structure proves both an effective and convenient place to accumulate character data.

XML Version

Expat is an XML 1.0 parser, and as such never complains based on the value of the version pseudo-attribute in the XML declaration, if present.

If an application needs to check the version number (to support alternate processing), it should use the XML_SetXmlDeclHandler function to set a handler that uses the information in the XML declaration to determine what to do. This example shows how to check that only a version number of "1.0" is accepted:

static int wrong_version;
static XML_Parser parser;

static void XMLCALL
xmldecl_handler(void            *userData,
                const XML_Char  *version,
                const XML_Char  *encoding,
                int              standalone)
{
  static const XML_Char Version_1_0[] = {'1', '.', '0', 0};

  int i;

  for (i = 0; i < (sizeof(Version_1_0) / sizeof(Version_1_0[0])); ++i) {
    if (version[i] != Version_1_0[i]) {
      wrong_version = 1;
      /* also clear all other handlers: */
      XML_SetCharacterDataHandler(parser, NULL);
      ...
      return;
    }
  }
  ...
}

Namespace Processing

When the parser is created using the XML_ParserCreateNS, function, Expat performs namespace processing. Under namespace processing, Expat consumes xmlns and xmlns:... attributes, which declare namespaces for the scope of the element in which they occur. This means that your start handler will not see these attributes. Your application can still be informed of these declarations by setting namespace declaration handlers with XML_SetNamespaceDeclHandler.

Element type and attribute names that belong to a given namespace are passed to the appropriate handler in expanded form. By default this expanded form is a concatenation of the namespace URI, the separator character (which is the 2nd argument to XML_ParserCreateNS), and the local name (i.e. the part after the colon). Names with undeclared prefixes are not well-formed when namespace processing is enabled, and will trigger an error. Unprefixed attribute names are never expanded, and unprefixed element names are only expanded when they are in the scope of a default namespace.

However if XML_SetReturnNSTriplet has been called with a non-zero do_nst parameter, then the expanded form for names with an explicit prefix is a concatenation of: URI, separator, local name, separator, prefix.

You can set handlers for the start of a namespace declaration and for the end of a scope of a declaration with the XML_SetNamespaceDeclHandler function. The StartNamespaceDeclHandler is called prior to the start tag handler and the EndNamespaceDeclHandler is called after the corresponding end tag that ends the namespace's scope. The namespace start handler gets passed the prefix and URI for the namespace. For a default namespace declaration (xmlns='...'), the prefix will be NULL. The URI will be NULL for the case where the default namespace is being unset. The namespace end handler just gets the prefix for the closing scope.

These handlers are called for each declaration. So if, for instance, a start tag had three namespace declarations, then the StartNamespaceDeclHandler would be called three times before the start tag handler is called, once for each declaration.

Character Encodings

While XML is based on Unicode, and every XML processor is required to recognized UTF-8 and UTF-16 (1 and 2 byte encodings of Unicode), other encodings may be declared in XML documents or entities. For the main document, an XML declaration may contain an encoding declaration:

<?xml version="1.0" encoding="ISO-8859-2"?>

External parsed entities may begin with a text declaration, which looks like an XML declaration with just an encoding declaration:

<?xml encoding="Big5"?>

With Expat, you may also specify an encoding at the time of creating a parser. This is useful when the encoding information may come from a source outside the document itself (like a higher level protocol.)

There are four built-in encodings in Expat:

• UTF-8
• UTF-16
• ISO-8859-1
• US-ASCII

Anything else discovered in an encoding declaration or in the protocol encoding specified in the parser constructor, triggers a call to the UnknownEncodingHandler. This handler gets passed the encoding name and a pointer to an XML_Encoding data structure. Your handler must fill in this structure and return XML_STATUS_OK if it knows how to deal with the encoding. Otherwise the handler should return XML_STATUS_ERROR. The handler also gets passed a pointer to an optional application data structure that you may indicate when you set the handler.

Expat places restrictions on character encodings that it can support by filling in the XML_Encoding structure. include file:

1. Every ASCII character that can appear in a well-formed XML document must be represented by a single byte, and that byte must correspond to it's ASCII encoding (except for the characters $@\^'{}~)
2. Characters must be encoded in 4 bytes or less.
3. All characters encoded must have Unicode scalar values less than or equal to 65535 (0xFFFF)This does not apply to the built-in support for UTF-16 and UTF-8
4. No character may be encoded by more that one distinct sequence of bytes

XML_Encoding contains an array of integers that correspond to the 1st byte of an encoding sequence. If the value in the array for a byte is zero or positive, then the byte is a single byte encoding that encodes the Unicode scalar value contained in the array. A -1 in this array indicates a malformed byte. If the value is -2, -3, or -4, then the byte is the beginning of a 2, 3, or 4 byte sequence respectively. Multi-byte sequences are sent to the convert function pointed at in the XML_Encoding structure. This function should return the Unicode scalar value for the sequence or -1 if the sequence is malformed.

One pitfall that novice Expat users are likely to fall into is that although Expat may accept input in various encodings, the strings that it passes to the handlers are always encoded in UTF-8 or UTF-16 (depending on how Expat was compiled). Your application is responsible for any translation of these strings into other encodings.

Handling External Entity References

Expat does not read or parse external entities directly. Note that any external DTD is a special case of an external entity. If you've set no ExternalEntityRefHandler, then external entity references are silently ignored. Otherwise, it calls your handler with the information needed to read and parse the external entity.

Your handler isn't actually responsible for parsing the entity, but it is responsible for creating a subsidiary parser with XML_ExternalEntityParserCreate that will do the job. This returns an instance of XML_Parser that has handlers and other data structures initialized from the parent parser. You may then use XML_Parse or XML_ParseBuffer calls against this parser. Since external entities my refer to other external entities, your handler should be prepared to be called recursively.

Parsing DTDs

In order to parse parameter entities, before starting the parse, you must call XML_SetParamEntityParsing with one of the following arguments:

XML_PARAM_ENTITY_PARSING_NEVER

Don't parse parameter entities or the external subset

XML_PARAM_ENTITY_PARSING_UNLESS_STANDALONE

Parse parameter entities and the external subset unless standalone was set to "yes" in the XML declaration.

XML_PARAM_ENTITY_PARSING_ALWAYS

Always parse parameter entities and the external subset

In order to read an external DTD, you also have to set an external entity reference handler as described above.

Temporarily Stopping Parsing

Expat 1.95.8 introduces a new feature: its now possible to stop parsing temporarily from within a handler function, even if more data has already been passed into the parser. Applications for this include

• Supporting the XInclude specification.
• Delaying further processing until additional information is available from some other source.
• Adjusting processor load as task priorities shift within an application.
• Stopping parsing completely (simply free or reset the parser instead of resuming in the outer parsing loop). This can be useful if an application-domain error is found in the XML being parsed or if the result of the parse is determined not to be useful after all.

To take advantage of this feature, the main parsing loop of an application needs to support this specifically. It cannot be supported with a parsing loop compatible with Expat 1.95.7 or earlier (though existing loops will continue to work without supporting the stop/resume feature).

An application that uses this feature for a single parser will have the rough structure (in pseudo-code):

fd = open_input()
p = create_parser()

if parse_xml(p, fd) {
  /* suspended */

  int suspended = 1;

  while (suspended) {
    do_something_else()
    if ready_to_resume() {
      suspended = continue_parsing(p, fd);
    }
  }
}

An application that may resume any of several parsers based on input (either from the XML being parsed or some other source) will certainly have more interesting control structures.

This C function could be used for the parse_xml function mentioned in the pseudo-code above:

#define BUFF_SIZE 10240

/* Parse a document from the open file descriptor 'fd' until the parse
   is complete (the document has been completely parsed, or there's
   been an error), or the parse is stopped.  Return non-zero when
   the parse is merely suspended.
*/
int
parse_xml(XML_Parser p, int fd)
{
  for (;;) {
    int last_chunk;
    int bytes_read;
    enum XML_Status status;

    void *buff = XML_GetBuffer(p, BUFF_SIZE);
    if (buff == NULL) {
      /* handle error... */
      return 0;
    }
    bytes_read = read(fd, buff, BUFF_SIZE);
    if (bytes_read < 0) {
      /* handle error... */
      return 0;
    }
    status = XML_ParseBuffer(p, bytes_read, bytes_read == 0);
    switch (status) {
      case XML_STATUS_ERROR:
        /* handle error... */
        return 0;
      case XML_STATUS_SUSPENDED:
        return 1;
    }
    if (bytes_read == 0)
      return 0;
  }
}

The corresponding continue_parsing function is somewhat simpler, since it only need deal with the return code from XML_ResumeParser; it can delegate the input handling to the parse_xml function:

/* Continue parsing a document which had been suspended.  The 'p' and
   'fd' arguments are the same as passed to parse_xml().  Return
   non-zero when the parse is suspended.
*/
int
continue_parsing(XML_Parser p, int fd)
{
  enum XML_Status status = XML_ResumeParser(p);
  switch (status) {
    case XML_STATUS_ERROR:
      /* handle error... */
      return 0;
    case XML_ERROR_NOT_SUSPENDED:
      /* handle error... */
      return 0;.
    case XML_STATUS_SUSPENDED:
      return 1;
  }
  return parse_xml(p, fd);
}

Now that we've seen what a mess the top-level parsing loop can become, what have we gained? Very simply, we can now use the XML_StopParser function to stop parsing, without having to go to great lengths to avoid additional processing that we're expecting to ignore. As a bonus, we get to stop parsing temporarily, and come back to it when we're ready.

To stop parsing from a handler function, use the XML_StopParser function. This function takes two arguments; the parser being stopped and a flag indicating whether the parse can be resumed in the future.

Expat Reference

Parser Creation

XML_ParserCreate

XML_Parser XMLCALL
XML_ParserCreate(const XML_Char *encoding);

XML_ParserCreateNS

XML_Parser XMLCALL
XML_ParserCreateNS(const XML_Char *encoding,
                   XML_Char sep);

Note: Expat does not validate namespace URIs (beyond encoding) against RFC 3986 today (and is not required to do so with regard to the XML 1.0 namespaces specification) but it may start doing that in future releases. Before that, an application using Expat must be ready to receive namespace URIs containing non-URI characters.

XML_ParserCreate_MM

XML_Parser XMLCALL
XML_ParserCreate_MM(const XML_Char *encoding,
                    const XML_Memory_Handling_Suite *ms,
		    const XML_Char *sep);

typedef struct {
  void *(XMLCALL *malloc_fcn)(size_t size);
  void *(XMLCALL *realloc_fcn)(void *ptr, size_t size);
  void (XMLCALL *free_fcn)(void *ptr);
} XML_Memory_Handling_Suite;

XML_ExternalEntityParserCreate

XML_Parser XMLCALL
XML_ExternalEntityParserCreate(XML_Parser p,
                               const XML_Char *context,
                               const XML_Char *encoding);

XML_ParserFree

void XMLCALL
XML_ParserFree(XML_Parser p);

XML_ParserReset

XML_Bool XMLCALL
XML_ParserReset(XML_Parser p,
                const XML_Char *encoding);

Parsing

To state the obvious: the three parsing functions XML_Parse, XML_ParseBuffer and XML_GetBuffer must not be called from within a handler unless they operate on a separate parser instance, that is, one that did not call the handler. For example, it is OK to call the parsing functions from within an XML_ExternalEntityRefHandler, if they apply to the parser created by XML_ExternalEntityParserCreate.

Note: The len argument passed to these functions should be considerably less than the maximum value for an integer, as it could create an integer overflow situation if the added lengths of a buffer and the unprocessed portion of the previous buffer exceed the maximum integer value. Input data at the end of a buffer will remain unprocessed if it is part of an XML token for which the end is not part of that buffer.

The application must make a concluding XML_Parse or XML_ParseBuffer call with isFinal set to XML_TRUE.

XML_Parse

enum XML_Status XMLCALL
XML_Parse(XML_Parser p,
          const char *s,
          int len,
          int isFinal);

enum XML_Status {
  XML_STATUS_ERROR = 0,
  XML_STATUS_OK = 1
};

XML_ParseBuffer

enum XML_Status XMLCALL
XML_ParseBuffer(XML_Parser p,
                int len,
                int isFinal);

XML_GetBuffer

void * XMLCALL
XML_GetBuffer(XML_Parser p,
              int len);

for (;;) {
  int bytes_read;
  void *buff = XML_GetBuffer(p, BUFF_SIZE);
  if (buff == NULL) {
    /* handle error */
  }

  bytes_read = read(docfd, buff, BUFF_SIZE);
  if (bytes_read < 0) {
    /* handle error */
  }

  if (! XML_ParseBuffer(p, bytes_read, bytes_read == 0)) {
    /* handle parse error */
  }

  if (bytes_read == 0)
    break;
}

XML_StopParser

enum XML_Status XMLCALL
XML_StopParser(XML_Parser p,
               XML_Bool resumable);

XML_ResumeParser

enum XML_Status XMLCALL
XML_ResumeParser(XML_Parser p);

XML_GetParsingStatus

void XMLCALL
XML_GetParsingStatus(XML_Parser p,
                     XML_ParsingStatus *status);

enum XML_Parsing {
  XML_INITIALIZED,
  XML_PARSING,
  XML_FINISHED,
  XML_SUSPENDED
};

typedef struct {
  enum XML_Parsing parsing;
  XML_Bool finalBuffer;
} XML_ParsingStatus;

Handler Setting

Although handlers are typically set prior to parsing and left alone, an application may choose to set or change the handler for a parsing event while the parse is in progress. For instance, your application may choose to ignore all text not descended from a para element. One way it could do this is to set the character handler when a para start tag is seen, and unset it for the corresponding end tag.

A handler may be unset by providing a NULL pointer to the appropriate handler setter. None of the handler setting functions have a return value.

Your handlers will be receiving strings in arrays of type XML_Char. This type is conditionally defined in expat.h as either char, wchar_t or unsigned short. The former implies UTF-8 encoding, the latter two imply UTF-16 encoding. Note that you'll receive them in this form independent of the original encoding of the document.

void XMLCALL
XML_SetStartElementHandler(XML_Parser p,
                           XML_StartElementHandler start);

typedef void
(XMLCALL *XML_StartElementHandler)(void *userData,
                                   const XML_Char *name,
                                   const XML_Char **atts);

void XMLCALL
XML_SetEndElementHandler(XML_Parser p,
                         XML_EndElementHandler);

typedef void
(XMLCALL *XML_EndElementHandler)(void *userData,
                                 const XML_Char *name);

void XMLCALL
XML_SetElementHandler(XML_Parser p,
                      XML_StartElementHandler start,
                      XML_EndElementHandler end);

void XMLCALL
XML_SetCharacterDataHandler(XML_Parser p,
                            XML_CharacterDataHandler charhndl)

typedef void
(XMLCALL *XML_CharacterDataHandler)(void *userData,
                                    const XML_Char *s,
                                    int len);

void XMLCALL
XML_SetProcessingInstructionHandler(XML_Parser p,
                                    XML_ProcessingInstructionHandler proc)

typedef void
(XMLCALL *XML_ProcessingInstructionHandler)(void *userData,
                                            const XML_Char *target,
                                            const XML_Char *data);

void XMLCALL
XML_SetCommentHandler(XML_Parser p,
                      XML_CommentHandler cmnt)

typedef void
(XMLCALL *XML_CommentHandler)(void *userData,
                              const XML_Char *data);

void XMLCALL
XML_SetStartCdataSectionHandler(XML_Parser p,
                                XML_StartCdataSectionHandler start);

typedef void
(XMLCALL *XML_StartCdataSectionHandler)(void *userData);

void XMLCALL
XML_SetEndCdataSectionHandler(XML_Parser p,
                              XML_EndCdataSectionHandler end);

typedef void
(XMLCALL *XML_EndCdataSectionHandler)(void *userData);

void XMLCALL
XML_SetCdataSectionHandler(XML_Parser p,
                           XML_StartCdataSectionHandler start,
                           XML_EndCdataSectionHandler end)

void XMLCALL
XML_SetDefaultHandler(XML_Parser p,
                      XML_DefaultHandler hndl)

typedef void
(XMLCALL *XML_DefaultHandler)(void *userData,
                              const XML_Char *s,
                              int len);

void XMLCALL
XML_SetDefaultHandlerExpand(XML_Parser p,
                            XML_DefaultHandler hndl)

typedef void
(XMLCALL *XML_DefaultHandler)(void *userData,
                              const XML_Char *s,
                              int len);

void XMLCALL
XML_SetExternalEntityRefHandler(XML_Parser p,
                                XML_ExternalEntityRefHandler hndl)

typedef int
(XMLCALL *XML_ExternalEntityRefHandler)(XML_Parser p,
                                        const XML_Char *context,
                                        const XML_Char *base,
                                        const XML_Char *systemId,
                                        const XML_Char *publicId);

XML_SetExternalEntityRefHandlerArg

void XMLCALL
XML_SetExternalEntityRefHandlerArg(XML_Parser p,
                                   void *arg)

void XMLCALL
XML_SetSkippedEntityHandler(XML_Parser p,
                            XML_SkippedEntityHandler handler)

typedef void
(XMLCALL *XML_SkippedEntityHandler)(void *userData,
                                    const XML_Char *entityName,
                                    int is_parameter_entity);

void XMLCALL
XML_SetUnknownEncodingHandler(XML_Parser p,
                              XML_UnknownEncodingHandler enchandler,
			      void *encodingHandlerData)

typedef int
(XMLCALL *XML_UnknownEncodingHandler)(void *encodingHandlerData,
                                      const XML_Char *name,
                                      XML_Encoding *info);

typedef struct {
  int map[256];
  void *data;
  int (XMLCALL *convert)(void *data, const char *s);
  void (XMLCALL *release)(void *data);
} XML_Encoding;

void XMLCALL
XML_SetStartNamespaceDeclHandler(XML_Parser p,
			         XML_StartNamespaceDeclHandler start);

typedef void
(XMLCALL *XML_StartNamespaceDeclHandler)(void *userData,
                                         const XML_Char *prefix,
                                         const XML_Char *uri);

void XMLCALL
XML_SetEndNamespaceDeclHandler(XML_Parser p,
			       XML_EndNamespaceDeclHandler end);

typedef void
(XMLCALL *XML_EndNamespaceDeclHandler)(void *userData,
                                       const XML_Char *prefix);

void XMLCALL
XML_SetNamespaceDeclHandler(XML_Parser p,
                            XML_StartNamespaceDeclHandler start,
                            XML_EndNamespaceDeclHandler end)

void XMLCALL
XML_SetXmlDeclHandler(XML_Parser p,
		      XML_XmlDeclHandler xmldecl);

typedef void
(XMLCALL *XML_XmlDeclHandler)(void            *userData,
                              const XML_Char  *version,
                              const XML_Char  *encoding,
                              int             standalone);

void XMLCALL
XML_SetStartDoctypeDeclHandler(XML_Parser p,
			       XML_StartDoctypeDeclHandler start);

typedef void
(XMLCALL *XML_StartDoctypeDeclHandler)(void           *userData,
                                       const XML_Char *doctypeName,
                                       const XML_Char *sysid,
                                       const XML_Char *pubid,
                                       int            has_internal_subset);

void XMLCALL
XML_SetEndDoctypeDeclHandler(XML_Parser p,
			     XML_EndDoctypeDeclHandler end);

typedef void
(XMLCALL *XML_EndDoctypeDeclHandler)(void *userData);

void XMLCALL
XML_SetDoctypeDeclHandler(XML_Parser p,
			  XML_StartDoctypeDeclHandler start,
			  XML_EndDoctypeDeclHandler end);

void XMLCALL
XML_SetElementDeclHandler(XML_Parser p,
			  XML_ElementDeclHandler eldecl);

typedef void
(XMLCALL *XML_ElementDeclHandler)(void *userData,
                                  const XML_Char *name,
                                  XML_Content *model);

enum XML_Content_Type {
  XML_CTYPE_EMPTY = 1,
  XML_CTYPE_ANY,
  XML_CTYPE_MIXED,
  XML_CTYPE_NAME,
  XML_CTYPE_CHOICE,
  XML_CTYPE_SEQ
};

enum XML_Content_Quant {
  XML_CQUANT_NONE,
  XML_CQUANT_OPT,
  XML_CQUANT_REP,
  XML_CQUANT_PLUS
};

typedef struct XML_cp XML_Content;

struct XML_cp {
  enum XML_Content_Type		type;
  enum XML_Content_Quant	quant;
  const XML_Char *		name;
  unsigned int			numchildren;
  XML_Content *			children;
};

void XMLCALL
XML_SetAttlistDeclHandler(XML_Parser p,
                          XML_AttlistDeclHandler attdecl);

typedef void
(XMLCALL *XML_AttlistDeclHandler)(void           *userData,
                                  const XML_Char *elname,
                                  const XML_Char *attname,
                                  const XML_Char *att_type,
                                  const XML_Char *dflt,
                                  int            isrequired);

void XMLCALL
XML_SetEntityDeclHandler(XML_Parser p,
			 XML_EntityDeclHandler handler);

typedef void
(XMLCALL *XML_EntityDeclHandler)(void           *userData,
                                 const XML_Char *entityName,
                                 int            is_parameter_entity,
                                 const XML_Char *value,
                                 int            value_length, 
                                 const XML_Char *base,
                                 const XML_Char *systemId,
                                 const XML_Char *publicId,
                                 const XML_Char *notationName);

void XMLCALL
XML_SetUnparsedEntityDeclHandler(XML_Parser p,
                                 XML_UnparsedEntityDeclHandler h)

typedef void
(XMLCALL *XML_UnparsedEntityDeclHandler)(void *userData,
                                         const XML_Char *entityName, 
                                         const XML_Char *base,
                                         const XML_Char *systemId,
                                         const XML_Char *publicId,
                                         const XML_Char *notationName);

<!ENTITY logo SYSTEM "images/logo.gif" NDATA gif>

void XMLCALL
XML_SetNotationDeclHandler(XML_Parser p,
                           XML_NotationDeclHandler h)

typedef void
(XMLCALL *XML_NotationDeclHandler)(void *userData, 
                                   const XML_Char *notationName,
                                   const XML_Char *base,
                                   const XML_Char *systemId,
                                   const XML_Char *publicId);

void XMLCALL
XML_SetNotStandaloneHandler(XML_Parser p,
                            XML_NotStandaloneHandler h)

typedef int 
(XMLCALL *XML_NotStandaloneHandler)(void *userData);

Parse position and error reporting functions

These are the functions you'll want to call when the parse functions return XML_STATUS_ERROR (a parse error has occurred), although the position reporting functions are useful outside of errors. The position reported is the byte position (in the original document or entity encoding) of the first of the sequence of characters that generated the current event (or the error that caused the parse functions to return XML_STATUS_ERROR.) The exceptions are callbacks triggered by declarations in the document prologue, in which case they exact position reported is somewhere in the relevant markup, but not necessarily as meaningful as for other events.

The position reporting functions are accurate only outside of the DTD. In other words, they usually return bogus information when called from within a DTD declaration handler.

XML_GetErrorCode

enum XML_Error XMLCALL
XML_GetErrorCode(XML_Parser p);

XML_ErrorString

const XML_LChar * XMLCALL
XML_ErrorString(enum XML_Error code);

XML_GetCurrentByteIndex

XML_Index XMLCALL
XML_GetCurrentByteIndex(XML_Parser p);

XML_GetCurrentLineNumber

XML_Size XMLCALL
XML_GetCurrentLineNumber(XML_Parser p);

XML_GetCurrentColumnNumber

XML_Size XMLCALL
XML_GetCurrentColumnNumber(XML_Parser p);

XML_GetCurrentByteCount

int XMLCALL
XML_GetCurrentByteCount(XML_Parser p);

XML_GetInputContext

const char * XMLCALL
XML_GetInputContext(XML_Parser p,
                    int *offset,
                    int *size);

Attack Protection

XML_SetBillionLaughsAttackProtectionMaximumAmplification

/* Added in Expat 2.4.0. */
XML_Bool XMLCALL
XML_SetBillionLaughsAttackProtectionMaximumAmplification(XML_Parser p,
                                                         float maximumAmplificationFactor);

    amplification := (direct + indirect) / direct
  

XML_SetBillionLaughsAttackProtectionActivationThreshold

/* Added in Expat 2.4.0. */
XML_Bool XMLCALL
XML_SetBillionLaughsAttackProtectionActivationThreshold(XML_Parser p,
                                                        unsigned long long activationThresholdBytes);

XML_SetReparseDeferralEnabled

/* Added in Expat 2.6.0. */
XML_Bool XMLCALL
XML_SetReparseDeferralEnabled(XML_Parser parser, XML_Bool enabled);

Miscellaneous functions

The functions in this section either obtain state information from the parser or can be used to dynamically set parser options.

XML_SetUserData

void XMLCALL
XML_SetUserData(XML_Parser p,
                void *userData);

XML_GetUserData

void * XMLCALL
XML_GetUserData(XML_Parser p);

XML_UseParserAsHandlerArg

void XMLCALL
XML_UseParserAsHandlerArg(XML_Parser p);

XML_SetBase

enum XML_Status XMLCALL
XML_SetBase(XML_Parser p,
            const XML_Char *base);

XML_GetBase

const XML_Char * XMLCALL
XML_GetBase(XML_Parser p);

XML_GetSpecifiedAttributeCount

int XMLCALL
XML_GetSpecifiedAttributeCount(XML_Parser p);

XML_GetIdAttributeIndex

int XMLCALL
XML_GetIdAttributeIndex(XML_Parser p);

XML_GetAttributeInfo

const XML_AttrInfo * XMLCALL
XML_GetAttributeInfo(XML_Parser parser);

typedef struct {
  XML_Index  nameStart;  /* Offset to beginning of the attribute name. */
  XML_Index  nameEnd;    /* Offset after the attribute name's last byte. */
  XML_Index  valueStart; /* Offset to beginning of the attribute value. */
  XML_Index  valueEnd;   /* Offset after the attribute value's last byte. */
} XML_AttrInfo;

XML_SetEncoding

enum XML_Status XMLCALL
XML_SetEncoding(XML_Parser p,
                const XML_Char *encoding);

XML_SetParamEntityParsing

int XMLCALL
XML_SetParamEntityParsing(XML_Parser p,
                          enum XML_ParamEntityParsing code);

XML_SetHashSalt

int XMLCALL
XML_SetHashSalt(XML_Parser p,
                unsigned long hash_salt);

XML_UseForeignDTD

enum XML_Error XMLCALL
XML_UseForeignDTD(XML_Parser parser, XML_Bool useDTD);

XML_SetReturnNSTriplet

void XMLCALL
XML_SetReturnNSTriplet(XML_Parser parser,
                       int        do_nst);

XML_DefaultCurrent

void XMLCALL
XML_DefaultCurrent(XML_Parser parser);

XML_ExpatVersion

XML_LChar * XMLCALL
XML_ExpatVersion();

XML_ExpatVersionInfo

struct XML_Expat_Version XMLCALL
XML_ExpatVersionInfo();

typedef struct {
  int major;
  int minor;
  int micro;
} XML_Expat_Version;

XML_GetFeatureList

const XML_Feature * XMLCALL
XML_GetFeatureList();

enum XML_FeatureEnum {
  XML_FEATURE_END = 0,
  XML_FEATURE_UNICODE,
  XML_FEATURE_UNICODE_WCHAR_T,
  XML_FEATURE_DTD,
  XML_FEATURE_CONTEXT_BYTES,
  XML_FEATURE_MIN_SIZE,
  XML_FEATURE_SIZEOF_XML_CHAR,
  XML_FEATURE_SIZEOF_XML_LCHAR,
  XML_FEATURE_NS,
  XML_FEATURE_LARGE_SIZE
};

typedef struct {
  enum XML_FeatureEnum  feature;
  XML_LChar            *name;
  long int              value;
} XML_Feature;

XML_FreeContentModel

void XMLCALL
XML_FreeContentModel(XML_Parser parser, XML_Content *model);

The following functions allow external code to share the memory allocator an XML_Parser has been configured to use. This is especially useful for third-party libraries that interact with a parser object created by application code, or heavily layered applications. This can be essential when using dynamically loaded libraries which use different C standard libraries (this can happen on Windows, at least).

XML_MemMalloc

void * XMLCALL
XML_MemMalloc(XML_Parser parser, size_t size);

XML_MemRealloc

void * XMLCALL
XML_MemRealloc(XML_Parser parser, void *ptr, size_t size);

XML_MemFree

void XMLCALL
XML_MemFree(XML_Parser parser, void *ptr);