.\"	$OpenBSD: zs.4,v 1.2 2017/11/02 15:37:58 jmc Exp $
.\"	$NetBSD: zstty.4,v 1.14 2011/06/07 20:22:56 wiz Exp $
.\"
.\" Copyright (c) 1997 The NetBSD Foundation, Inc.
.\" All rights reserved.
.\"
.\" This code is derived from software contributed to The NetBSD Foundation
.\" by Gordon W. Ross.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
.\" PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
.\" POSSIBILITY OF SUCH DAMAGE.
.\"
.Dd $Mdocdate: November 2 2017 $
.Dt ZS 4 alpha
.Os
.Sh NAME
.Nm zs ,
.\" .Nm zskbd ,
.\" .Nm zsms ,
.Nm zstty
.Nd Zilog 8530 (ZSCC) Serial Communications Controller
.Sh SYNOPSIS
.Cd "zs*    at ioasic0"
.\" .Cd "lskbd* at zs1"
.\" .Cd "vsms*  at zs0"
.Cd "zstty* at zs?"
.Sh DESCRIPTION
The
.Nm
driver provides TTY support for the two Zilog 8530 Dual UART chips found on
DEC 3000 systems.
On these systems, two of these serial interfaces are hardwired for use by the
keyboard and mouse.
Only the second interface of each
.Nm
controller can be used as a regular serial port.
.\" The
.\" .Nm lskbd
.\" devices connect keyboard devices to the generic keyboard driver
.\" .Nm wskbd .
.\" The
.\" .Nm vsms
.\" devices connect mice to the generic mouse driver
.\" .Xr wsmouse 4 .
The
.Nm zstty
interfaces provide RS-423
and RS-232 serial ports for general purpose use.
.Pp
The
.Nm
driver supports all of the standard
.Xr tty 4
ioctl calls.
The status of the DTR, RTS, CTS, and DCD signals can be queried with
the TIOCMGET command but, due to limitations in the hardware,
only the DTR and RTS signals can be modified with the TIOCMSET, TIOCMBIC,
and TIOCMBIS
.Xr ioctl 2
commands.
.Pp
Input and output for each line may be set to any baud rate in the
range 50 to 38400.
.Sh FILES
.Bl -tag -width Pa -compact
.It Pa /dev/ttyB[01]
.It Pa /dev/cuaB[01]
.El
.Sh DIAGNOSTICS
.Bl -tag -width indent
.It zs*: fifo overflow
The on-chip
.Dq FIFO
has overflowed and incoming data has been lost.
This generally means the machine is not responding to
interrupts from the ZS chip fast enough, which can be
remedied only by using a lower baud rate.
.It zs*: ring overflow
The software input
.Qq ring
has overflowed.
This usually means input flow-control is not configured correctly
.Pq i.e. incorrect cable wiring .
.El
.Sh SEE ALSO
.Xr intro 4 ,
.Xr ioasic 4 ,
.Xr tty 4
.\" .Xr wskbd 4 ,
.\" .Xr wsmouse 4