.\" $OpenBSD: run.4,v 1.56 2021/10/24 12:32:42 kn Exp $ .\" .\" Copyright (c) 2008 Damien Bergamini .\" .\" Permission to use, copy, modify, and distribute this software for any .\" purpose with or without fee is hereby granted, provided that the above .\" copyright notice and this permission notice appear in all copies. .\" .\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES .\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF .\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR .\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES .\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" .Dd $Mdocdate: October 24 2021 $ .Dt RUN 4 .Os .Sh NAME .Nm run .Nd Ralink Technology/MediaTek USB IEEE 802.11a/b/g/n wireless network device .Sh SYNOPSIS .Cd "run* at uhub? port ?" .Sh DESCRIPTION The .Nm driver supports USB 2.0 wireless adapters based on the Ralink RT2700U, RT2800U, RT3000U and RT3900E chipsets. .Pp The RT2700U chipset consists of two integrated chips, an RT2770 MAC/BBP and an RT2720 (1T2R) or RT2750 (dual-band 1T2R) radio transceiver. .Pp The RT2800U chipset consists of two integrated chips, an RT2870 MAC/BBP and an RT2820 (2T3R) or RT2850 (dual-band 2T3R) radio transceiver. .Pp The RT3000U is a single-chip solution based on an RT3070 MAC/BBP and an RT3020 (1T1R), RT3021 (1T2R), RT3022 (2T2R) or RT3052 (dual-band 2T2R) radio transceiver. .Pp The RT3900E is a single-chip solution based on an RT3593, RT5390, RT5392 or an RT5592 MAC/BBP and an RT3053 (dual-band 3T3R), RT5370 (1T1R), RT5372 (2T2R), or RT5572 (dual-band 2T2R) radio transceiver. .Pp These are the modes the .Nm driver can operate in: .Bl -tag -width "IBSS-masterXX" .It BSS mode Also known as .Em infrastructure mode, this is used when associating with an access point, through which all traffic passes. This mode is the default. .It monitor mode In this mode the driver is able to receive packets without associating with an access point. This disables the internal receive filter and enables the card to capture packets from networks which it wouldn't normally have access to, or to scan for access points. .El .Pp The .Nm driver can be configured to use Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA1 and WPA2). WPA2 is the current encryption standard for wireless networks. It is strongly recommended that neither WEP nor WPA1 are used as the sole mechanism to secure wireless communication, due to serious weaknesses. WPA1 is disabled by default and may be enabled using the option .Qq Cm wpaprotos Ar wpa1,wpa2 . For standard WPA networks which use pre-shared keys (PSK), keys are configured using the .Qq Cm wpakey option. WPA-Enterprise networks require use of the wpa_supplicant package. The .Nm driver offloads both encryption and decryption of data frames to the hardware for the WEP40, WEP104, TKIP(+MIC) and CCMP ciphers. .Pp The .Nm driver can be configured at runtime with .Xr ifconfig 8 or on boot with .Xr hostname.if 5 . .Sh FILES The driver needs the following firmware files, which are loaded when an interface is brought up: .Pp .Bl -tag -width Ds -offset indent -compact .It /etc/firmware/run-rt2870 .It /etc/firmware/run-rt3071 .El .Sh HARDWARE The following adapters should work: .Pp .Bl -tag -width Ds -offset indent -compact .It Airlink101 AWLL6090 .It ASUS USB-N11 .It ASUS USB-N13 ver. A1 .It ASUS USB-N53 .It ASUS USB-N66 .It ASUS WL-160N .It Belkin F5D8051 ver 3000 .It Belkin F5D8053 .It Belkin F5D8055 .It Belkin F6D4050 ver 1 .It Belkin F6D4050 ver 2 .It Belkin F7D1101 ver 2 .It Belkin F9L1103 .It Buffalo WLI-UC-AG300N .It Buffalo WLI-UC-G300N .It Buffalo WLI-UC-G301N .It Buffalo WLI-UC-GN .It Buffalo WLI-UC-GNHP .It Buffalo WLI-UC-GNM .It Buffalo WLI-UC-GNM2 .It Cisco AM10 .It Corega CG-WLUSB2GNL .It Corega CG-WLUSB2GNR .It Corega CG-WLUSB300AGN .It Corega CG-WLUSB300GNM .It D-Link DWA-125 rev B2 .It D-Link DWA-127 .It D-Link DWA-130 rev B1, F1 .It D-Link DWA-140 rev B1, B2, B3, \&D1 .It D-Link DWA-160 rev B2 .It D-Link DWA-162 .It DrayTek Vigor N61 .It Edimax EW-7711UAn .It Edimax EW-7711USn .It Edimax EW-7711UTn .It Edimax EW-7717Un .It Edimax EW-7718Un .It Edimax EW-7722UTn .It Edimax EW-7733UnD .It Gigabyte GN-WB30N .It Gigabyte GN-WB31N .It Gigabyte GN-WB32L .It Hawking HWDN1 .It Hawking HWUN1 .It Hawking HWUN2 .It Hercules HWNU-300 .It Keebox W150NU .It Linksys AE1000 .It Linksys WUSB54GC v3 .It Linksys WUSB600N .It LogiLink WL0084B .It Logitec gLAN-W150NU2BK .It Logitec LAN-W150N/U2 .It Logitec LAN-W300N/U2 .It Logitec LAN-W300N/U2S .It Mvix Nubbin MS-811N .It Planex GW-USMicroN .It Planex GW-US300MiniS .It Sitecom WL-182 .It Sitecom WL-188 .It Sitecom WL-301 .It Sitecom WL-302 .It Sitecom WL-315 .It Sitecom WLA-4000 .It Sitecom WLA-5000 .It SMC SMCWUSBS-N2 .It Sweex LW153 .It Sweex LW303 .It Sweex LW313 .It Tenda W311M .It TP-LINK TL-WDN3200 .It TP-LINK TL-WN727N v3 .It TRENDnet TEW-645UB .It Unex DNUR-81 .It Unex DNUR-82 .It ZyXEL NWD-211AN .It ZyXEL NWD-271N .It ZyXEL NWD2105 .It ZyXEL NWD210N .It ZyXEL NWD2205 .It ZyXEL NWD270N .It ZyXEL NWD2705 .El .Sh EXAMPLES The following example scans for available networks: .Pp .Dl # ifconfig run0 scan .Pp The following .Xr hostname.if 5 example configures run0 to join network .Dq mynwid , using WPA key .Dq mywpakey , obtaining an IP address using DHCP: .Bd -literal -offset indent join mynwid wpakey mywpakey inet autoconf .Ed .Sh DIAGNOSTICS .Bl -diag .It "run0: error N, could not read firmware ..." For some reason, the driver was unable to read the microcode file from the filesystem. The file might be missing or corrupted. .It "run0: could not load 8051 microcode" An error occurred while attempting to upload the microcode to the onboard 8051 microcontroller unit. .It "run0: device timeout" A frame dispatched to the hardware for transmission did not complete in time. The driver will reset the hardware. This should not happen. .El .Sh SEE ALSO .Xr arp 4 , .Xr ifmedia 4 , .Xr intro 4 , .Xr netintro 4 , .Xr usb 4 , .Xr hostname.if 5 , .Xr ifconfig 8 .Sh HISTORY The .Nm driver first appeared in .Ox 4.5 . .Sh AUTHORS The .Nm driver was written by .An Damien Bergamini Aq Mt damien.bergamini@free.fr . .Sh CAVEATS The .Nm driver does not support any of the 802.11n capabilities offered by the RT2800 and RT3000 chipsets. Additional work is required in .Xr ieee80211 9 before those features can be supported. .Pp This driver does not support powersave mode.