/* $OpenBSD: locore_subr.S,v 1.19 2023/12/12 07:37:21 deraadt Exp $ */ /* $NetBSD: locore_subr.S,v 1.28 2006/01/23 22:52:09 uwe Exp $ */ /* * Copyright (c) 2007 Miodrag Vallat. * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice, this permission notice, and the disclaimer below * appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ /*- * Copyright (c) 2002 The NetBSD Foundation, Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include "assym.h" #include /* SYS_sigreturn */ #include #include #include /* UPAGES */ #include #include /* * LINTSTUB: include * LINTSTUB: include * LINTSTUB: include */ /* * Save integer registers in the pcb. * reg points to pcb->pcb_sf. */ #define SAVEPCB(reg) \ add #SF_SIZE, reg ; \ sts.l mach, @-##reg ; \ sts.l macl, @-##reg ; \ stc.l r7_bank,@-##reg ; \ stc.l sr, @-##reg ; \ stc.l r6_bank,@-##reg ; \ sts.l pr, @-##reg ; \ mov.l r8, @-##reg ; \ mov.l r9, @-##reg ; \ mov.l r10, @-##reg ; \ mov.l r11, @-##reg ; \ mov.l r12, @-##reg ; \ mov.l r13, @-##reg ; \ mov.l r14, @-##reg ; \ mov.l r15, @-##reg /* * Save floating point registers to a fpreg structure. * reg points to the structure, tmp and tmp2 are two scratch integer registers. */ #define SAVEFP(reg, tmp, tmp2) \ add #124, reg ; \ sts fpscr, tmp2 ; \ add #(FP_SIZE - 124), reg ; \ mov #0, tmp; \ mov.l tmp2, @-##reg ; \ lds tmp, fpscr; \ sts.l fpul, @-##reg ; \ frchg; \ fmov.s fr15, @-##reg ; \ fmov.s fr14, @-##reg ; \ fmov.s fr13, @-##reg ; \ fmov.s fr12, @-##reg ; \ fmov.s fr11, @-##reg ; \ fmov.s fr10, @-##reg ; \ fmov.s fr9, @-##reg ; \ fmov.s fr8, @-##reg ; \ fmov.s fr7, @-##reg ; \ fmov.s fr6, @-##reg ; \ fmov.s fr5, @-##reg ; \ fmov.s fr4, @-##reg ; \ fmov.s fr3, @-##reg ; \ fmov.s fr2, @-##reg ; \ fmov.s fr1, @-##reg ; \ fmov.s fr0, @-##reg ; \ frchg; \ fmov.s fr15, @-##reg ; \ fmov.s fr14, @-##reg ; \ fmov.s fr13, @-##reg ; \ fmov.s fr12, @-##reg ; \ fmov.s fr11, @-##reg ; \ fmov.s fr10, @-##reg ; \ fmov.s fr9, @-##reg ; \ fmov.s fr8, @-##reg ; \ fmov.s fr7, @-##reg ; \ fmov.s fr6, @-##reg ; \ fmov.s fr5, @-##reg ; \ fmov.s fr4, @-##reg ; \ fmov.s fr3, @-##reg ; \ fmov.s fr2, @-##reg ; \ fmov.s fr1, @-##reg ; \ fmov.s fr0, @-##reg ; \ lds tmp2, fpscr /* * Load floating point registers from a fpreg structure. * reg points to the structure, tmp is a scratch integer register. */ #define LOADFP(reg, tmp) \ mov #0, tmp; \ lds tmp, fpscr; \ fmov.s @##reg##+, fr0 ; \ fmov.s @##reg##+, fr1 ; \ fmov.s @##reg##+, fr2 ; \ fmov.s @##reg##+, fr3 ; \ fmov.s @##reg##+, fr4 ; \ fmov.s @##reg##+, fr5 ; \ fmov.s @##reg##+, fr6 ; \ fmov.s @##reg##+, fr7 ; \ fmov.s @##reg##+, fr8 ; \ fmov.s @##reg##+, fr9 ; \ fmov.s @##reg##+, fr10 ; \ fmov.s @##reg##+, fr11 ; \ fmov.s @##reg##+, fr12 ; \ fmov.s @##reg##+, fr13 ; \ fmov.s @##reg##+, fr14 ; \ fmov.s @##reg##+, fr15 ; \ frchg; \ fmov.s @##reg##+, fr0 ; \ fmov.s @##reg##+, fr1 ; \ fmov.s @##reg##+, fr2 ; \ fmov.s @##reg##+, fr3 ; \ fmov.s @##reg##+, fr4 ; \ fmov.s @##reg##+, fr5 ; \ fmov.s @##reg##+, fr6 ; \ fmov.s @##reg##+, fr7 ; \ fmov.s @##reg##+, fr8 ; \ fmov.s @##reg##+, fr9 ; \ fmov.s @##reg##+, fr10 ; \ fmov.s @##reg##+, fr11 ; \ fmov.s @##reg##+, fr12 ; \ fmov.s @##reg##+, fr13 ; \ fmov.s @##reg##+, fr14 ; \ fmov.s @##reg##+, fr15 ; \ lds.l @##reg##+, fpul ; \ lds.l @##reg##+, fpscr .text .align 5 /* align cache line size (32B) */ /* * LINTSTUB: Func: void cpu_switchto(struct proc *old, struct proc *new) * Switch proc contexts. */ ENTRY(cpu_switchto) mov r4, r0 cmp/eq #0, r0 bt 1f /* Save old proc's context to switchframe */ mov.l .L_SF, r0 mov.l @(r0, r4), r1 SAVEPCB(r1) add #PCB_FP, r1 SAVEFP(r1, r8, r9) 1: mov.l .L_cpu_switch_prepare, r0 jsr @r0 mov r5, r8 /* save new proc */ mov r8, r4 /* Setup kernel stack */ mov.l .L_SF, r0 mov.l @(r0, r4), r1 /* switch frame */ mov.l @(SF_R7_BANK, r1), r0 /* stack top */ mov.l @(SF_R6_BANK, r1), r2 /* current frame */ mov.l @(SF_R15, r1), r3 /* current stack */ /* During kernel stack switching, all interrupts are disabled. */ __EXCEPTION_BLOCK(r1, r5) /* switch to new kernel stack */ ldc r0, r7_bank ldc r2, r6_bank mov r3, r15 /* Wire u-area */ MOV (switch_resume, r0) jsr @r0 mov r4, r8 /* save new proc */ mov r8, r4 __EXCEPTION_UNBLOCK(r0, r1) /* Now OK to use kernel stack. */ /* Restore new proc's context from switchframe */ mov.l .L_SF, r0 mov.l @(r0, r4), r1 add #4, r1 /* r15 already restored */ mov.l @r1+, r14 mov.l @r1+, r13 mov.l @r1+, r12 mov.l @r1+, r11 mov.l @r1+, r10 mov.l @r1+, r9 mov.l @r1+, r8 lds.l @r1+, pr add #4, r1 /* r6_bank already restored */ ldc.l @r1+, sr add #4, r1 /* r7_bank already restored */ lds.l @r1+, macl lds.l @r1+, mach mov.l @(r0, r4), r1 add #PCB_FP, r1 LOADFP(r1, r0) rts nop .align 2 .L_SF: .long (P_MD_PCB) .L_cpu_switch_prepare: .long cpu_switch_prepare FUNC_SYMBOL(switch_resume) #ifdef SH3 /* * LINTSTUB: Func: void sh3_switch_resume(struct proc *p) * Set current u-area PTE array to curupte. * No need to flush any entries. it is depended on u-area mapping is * wired, and its mapping never cause modified/reference fault. * u-area TLB fault is only covered by TLB miss exception. * When the situation that "VPN match but not Valid" occur, SH3 jump to * "generic exception" handler instead of TLB miss exception. * But OpenBSD/sh code doesn't handle it. As the result, it causes * hard reset. (never can access kernel stack). */ NENTRY(sh3_switch_resume) mov.l .L_UPTE, r0 mov.l .L_curupte, r1 add r4, r0 /* p->p_md.md_upte */ rts mov.l r0, @r1 .align 2 .L_UPTE: .long P_MD_UPTE .L_curupte: .long curupte SET_ENTRY_SIZE(sh3_switch_resume) #endif /* SH3 */ #ifdef SH4 /* * LINTSTUB: Func: void sh4_switch_resume(struct proc *p) * Wire u-area. invalidate TLB entry for kernel stack to prevent * TLB multiple hit. */ NENTRY(sh4_switch_resume) mov.l .L_UPTE__sh4, r0 add r0, r4 /* p->p_md.md_upte */ mov #UPAGES,r3 mov #1, r2 mov.l @r4, r0 /* if (p->p_md.md_upte[0].addr == 0) return; */ tst r0, r0 bt 2f /* Save old ASID and set ASID to zero */ xor r0, r0 mov.l .L_4_PTEH, r1 mov.l @r1, r7 mov.l r0, @r1 mov.l .L_VPN_MASK, r6 mov.l .L_4_UTLB_AA_A, r5 /* TLB address array must be accessed via P2. Setup jump address. */ mova 1f, r0 mov.l .L_P2BASE, r1 or r1, r0 jmp @r0 /* run P2 */ nop /* Probe VPN match TLB entry and invalidate it. */ .align 2 /* mova target must be 4byte alignment */ 1: mov.l @(4, r4), r0 and r6, r0 mov.l r0, @r5 /* clear D, V */ /* Wire u-area TLB entry */ /* Address array */ mov.l @r4+, r0 /* addr */ mov.l @r4+, r1 /* data */ mov.l r1, @r0 /* *addr = data */ /* Data array */ mov.l @r4+, r0 /* addr */ mov.l @r4+, r1 /* data */ mov.l r1, @r0 /* *addr = data */ cmp/eq r2, r3 bf/s 1b add #1, r2 /* restore ASID */ mov.l .L_4_PTEH, r0 mov.l r7, @r0 mova 2f, r0 jmp @r0 /* run P1 */ nop .align 2 2: rts /* mova target must be 4byte alignment */ nop .align 2 .L_UPTE__sh4: .long P_MD_UPTE .L_4_PTEH: .long SH4_PTEH .L_4_UTLB_AA_A: .long (SH4_UTLB_AA | SH4_UTLB_A) .L_4_ITLB_AA: .long SH4_ITLB_AA .L_VPN_MASK: .long 0xfffff000 .L_P2BASE: .long 0xa0000000 SET_ENTRY_SIZE(sh4_switch_resume) #endif /* SH4 */ /* * LINTSTUB: Func: int _cpu_intr_raise(int s) * raise SR.IMASK to 's'. if current SR.IMASK is greater equal 's', * nothing to do. returns previous SR.IMASK. */ NENTRY(_cpu_intr_raise) stc sr, r2 mov #0x78, r1 mov r2, r0 shll r1 /* r1 = 0xf0 */ and r1, r0 /* r0 = SR & 0xf0 */ cmp/ge r4, r0 /* r0 >= r4 ? T = 1 */ bt/s 1f not r1, r1 /* r1 = 0xffffff0f */ and r1, r2 /* r2 = SR & ~0xf0 */ or r2, r4 /* r4 = (SR & ~0xf0) | s */ ldc r4, sr /* SR = r4 (don't move to delay slot) */ 1: rts nop /* return (SR & 0xf0) */ SET_ENTRY_SIZE(_cpu_intr_raise) /* * LINTSTUB: Func: int _cpu_intr_suspend(void) * Mask all external interrupt. Returns previous SR.IMASK. */ NENTRY(_cpu_intr_suspend) stc sr, r0 /* r0 = SR */ mov #0x78, r1 shll r1 /* r1 = 0x000000f0 */ mov r0, r2 /* r2 = SR */ or r1, r2 /* r2 |= 0x000000f0 */ ldc r2, sr /* SR = r2 */ rts and r1, r0 /* r0 = SR & 0x000000f0 */ SET_ENTRY_SIZE(_cpu_intr_suspend) /* * LINTSTUB: Func: int _cpu_intr_resume(int s) * Set 's' to SR.IMASK. Returns previous SR.IMASK. */ NENTRY(_cpu_intr_resume) stc sr, r0 /* r0 = SR */ mov #0x78, r2 shll r2 /* r2 = 0x000000f0 */ not r2, r1 /* r1 = 0xffffff0f */ and r0, r1 /* r1 = (SR & ~0xf0) */ or r1, r4 /* r4 = (SR & ~0xf0) | level */ ldc r4, sr /* SR = r0 (don't move to delay slot) */ rts and r2, r0 /* return (SR & 0xf0) */ SET_ENTRY_SIZE(_cpu_intr_resume) /* * LINTSTUB: Func: int _cpu_exception_suspend(void) * Block exception (SR.BL). if external interrupt raise, pending interrupt. * if exception occur, jump to 0xa0000000 (hard reset). */ NENTRY(_cpu_exception_suspend) stc sr, r0 /* r0 = SR */ mov #0x10, r1 swap.b r1, r1 mov r0, r2 /* r2 = r0 */ swap.w r1, r1 /* r1 = 0x10000000 */ or r1, r2 /* r2 |= 0x10000000 */ ldc r2, sr /* SR = r2 */ rts and r1, r0 /* r0 &= 0x10000000 */ SET_ENTRY_SIZE(_cpu_exception_suspend) /* * LINTSTUB: Func: void _cpu_exception_resume(int s) * restore 's' exception mask. (SR.BL) */ NENTRY(_cpu_exception_resume) stc sr, r0 /* r0 = SR */ mov #0x10, r1 swap.b r1, r1 swap.w r1, r1 not r1, r1 /* r1 = ~0x10000000 */ and r1, r0 /* r0 &= ~0x10000000 */ or r4, r0 /* r0 |= old SR.BL */ ldc r0, sr /* SR = r0 (don't move to delay slot) */ rts nop SET_ENTRY_SIZE(_cpu_exception_resume) /* * LINTSTUB: Func: void _cpu_spin(uint32_t count) * Loop for 'count' * 10 cycles. * [...] * add IF ID EX MA WB * nop IF ID EX MA WB * cmp/pl IF ID EX MA WB - - * nop IF ID EX MA - - WB * bt IF ID EX . . MA WB * nop IF ID - - EX MA WB * nop IF - - ID EX MA WB * nop - - - IF ID EX MA WB * add IF ID EX MA WB * nop IF ID EX MA WB * cmp/pl IF ID EX MA WB - - * nop IF ID EX MA - - WB * bt IF ID EX . . MA * [...] */ .align 5 /* align cache line size (32B) */ NENTRY(_cpu_spin) 1: nop /* 1 */ nop /* 2 */ nop /* 3 */ add #-1, r4 /* 4 */ nop /* 5 */ cmp/pl r4 /* 6 */ nop /* 7 */ bt 1b /* 8, 9, 10 */ rts nop SET_ENTRY_SIZE(_cpu_spin) /* * proc_trapmpoline: * Call the service function with one argument specified by the r12 and r11 * respectively. set by cpu_fork(). */ NENTRY(proc_trampoline) mov.l .L_proc_trampoline_mi, r1 jsr @r1 /* proc_trampoline_mi() */ nop jsr @r12 mov r11, r4 __EXCEPTION_RETURN /* NOTREACHED */ .L_proc_trampoline_mi: .long proc_trampoline_mi SET_ENTRY_SIZE(proc_trampoline) /* * LINTSTUB: Var: char sigcode[1] * Signal trampoline. * * The kernel arranges for the signal handler to be invoked directly. * This trampoline is used only to perform the return. * * On entry, the stack looks like this: * * sp-> sigcontext structure */ NENTRY(sigcode) mov r15, r4 /* get pointer to sigcontext */ mov.l .L_SYS_sigreturn, r0 .globl sigcodecall sigcodecall: trapa #0x80 /* and call sigreturn() */ .globl sigcoderet sigcoderet: sleep /* privileged -> illegal? */ /* NOTREACHED */ .align 2 .L_SYS_sigreturn: .long SYS_sigreturn /* LINTSTUB: Var: char esigcode[1] */ .globl esigcode esigcode: SET_ENTRY_SIZE(sigcode) .globl sigfill sigfill: sleep /* privileged -> illegal? */ esigfill: .data .globl sigfillsiz sigfillsiz: .word esigfill - sigfill .text /* * LINTSTUB: Func: void savectx(struct pcb *pcb) * save struct switchframe. */ ENTRY(savectx) SAVEPCB(r4) add #PCB_FP, r4 SAVEFP(r4, r0, r1) rts nop SET_ENTRY_SIZE(savectx) /* * void fpu_save(struct fpreg *fp) * * Saves fpu context. */ ENTRY(fpu_save) SAVEFP(r4, r0, r1) rts nop SET_ENTRY_SIZE(fpu_save) /* * void fpu_restore(struct fpreg *fp) * * Restores fpu context. */ ENTRY(fpu_restore) LOADFP(r4, r0) rts nop SET_ENTRY_SIZE(fpu_restore) /* * LINTSTUB: Func: int copyout(const void *ksrc, void *udst, size_t len) * Copy len bytes into the user address space. */ ENTRY(copyout) mov.l r14, @-r15 sts.l pr, @-r15 mov r15, r14 mov #EFAULT, r0 /* assume there was a problem */ mov r4, r3 mov r5, r2 mov r5, r4 add r6, r2 cmp/hs r5, r2 /* bomb if uaddr+len wraps */ bf 2f mov.l .L_copyout_VM_MAXUSER_ADDRESS, r1 cmp/hi r1, r2 /* bomb if uaddr isn't in user space */ bt 2f mov.l .L_copyout_curpcb, r1 /* set fault handler */ mov.l @r1, r2 mov.l .L_copyout_onfault, r1 mov.l r1, @(PCB_ONFAULT,r2) mov.l .L_copyout_memcpy, r1 jsr @r1 /* memcpy(uaddr, kaddr, len) */ mov r3, r5 mov #0, r0 1: mov.l .L_copyout_curpcb, r1 /* clear fault handler */ mov.l @r1, r2 mov #0, r1 mov.l r1, @(PCB_ONFAULT,r2) 2: mov r14, r15 lds.l @r15+, pr rts mov.l @r15+, r14 3: bra 1b mov #EFAULT, r0 .align 2 .L_copyout_onfault: .long 3b .L_copyout_VM_MAXUSER_ADDRESS: .long VM_MAXUSER_ADDRESS .L_copyout_curpcb: .long curpcb .L_copyout_memcpy: .long memcpy SET_ENTRY_SIZE(copyout) /* * LINTSTUB: Func: int _copyin(const void *usrc, void *kdst, size_t len) * Copy len bytes from the user address space. */ ENTRY(_copyin) mov.l r14, @-r15 sts.l pr, @-r15 mov r15, r14 mov #EFAULT, r0 /* assume there was a problem */ mov r4, r3 mov r5, r4 mov r3, r2 add r6, r2 cmp/hs r3, r2 /* bomb if uaddr+len wraps */ bf 2f mov.l .L_copyin_VM_MAXUSER_ADDRESS, r1 cmp/hi r1, r2 /* bomb if uaddr isn't in user space */ bt 2f mov.l .L_copyin_curpcb, r1 /* set fault handler */ mov.l @r1, r2 mov.l .L_copyin_onfault, r1 mov.l r1, @(PCB_ONFAULT,r2) mov.l .L_copyin_memcpy, r1 jsr @r1 /* memcpy(kaddr, uaddr, len) */ mov r3, r5 mov #0, r0 1: mov.l .L_copyin_curpcb, r1 /* clear fault handler */ mov.l @r1, r2 mov #0, r1 mov.l r1, @(PCB_ONFAULT,r2) 2: mov r14, r15 lds.l @r15+, pr rts mov.l @r15+, r14 3: bra 1b mov #EFAULT, r0 .align 2 .L_copyin_onfault: .long 3b .L_copyin_VM_MAXUSER_ADDRESS: .long VM_MAXUSER_ADDRESS .L_copyin_curpcb: .long curpcb .L_copyin_memcpy: .long memcpy SET_ENTRY_SIZE(_copyin) /* * int copyin32(const void *usrc, void *kdst) */ ENTRY(copyin32) mov.l r14, @-r15 sts.l pr, @-r15 mov r15, r14 mov #3, r3 mov #EFAULT, r0 /* assume there was a problem */ and r4, r3 tst r3, r3 bf 2f /* punt if not aligned */ mov.l .L_copyin32_VM_MAXUSER_ADDRESS, r1 cmp/hi r1, r4 /* bomb if uaddr isn't in user space */ bt 2f mov.l .L_copyin32_curpcb, r1 /* set fault handler */ mov.l @r1, r2 mov.l .L_copyin32_onfault, r3 mov.l r3, @(PCB_ONFAULT,r2) mov.l @r4, r1 mov #0, r0 mov.l r1, @r5 mov.l r0, @(PCB_ONFAULT,r2) 2: mov r14, r15 lds.l @r15+, pr rts mov.l @r15+, r14 3: mov.l .L_copyin32_curpcb, r1 /* clear fault handler */ mov.l @r1, r2 mov #0, r1 mov.l r1, @(PCB_ONFAULT,r2) bra 2b mov #EFAULT, r0 .align 2 .L_copyin32_onfault: .long 3b .L_copyin32_VM_MAXUSER_ADDRESS: .long VM_MAXUSER_ADDRESS - 4 /* sizeof(uint32_t) */ .L_copyin32_curpcb: .long curpcb SET_ENTRY_SIZE(copyin32) /* * LINTSTUB: Func: int copyoutstr(const void *ksrc, void *udst, size_t maxlen, size_t *lencopied) * Copy a NUL-terminated string, at most maxlen characters long, * into the user address space. Return the number of characters * copied (including the NUL) in *lencopied. If the string is * too long, return ENAMETOOLONG; else return 0 or EFAULT. */ ENTRY(copyoutstr) mov.l r8, @-r15 mov #EFAULT, r3 /* assume there was a problem */ mov r4, r8 mov.l .L_copyoutstr_curpcb, r1 /* set fault handler */ mov.l @r1, r2 mov.l .L_copyoutstr_onfault, r1 mov.l r1, @(PCB_ONFAULT,r2) mov.l .L_copyoutstr_VM_MAXUSER_ADDRESS, r1 cmp/hi r1, r5 /* bomb if udst isn't in user space */ bt 4f mov r1, r0 sub r5, r0 cmp/hi r6, r0 /* don't beyond user space */ bf 2f bra 2f mov r6, r0 .align 2 1: mov.b @r4+, r1 /* copy str */ mov.b r1, @r5 extu.b r1, r1 add #1, r5 tst r1, r1 bf 2f bra 3f mov #0, r3 .align 2 2: add #-1, r0 cmp/eq #-1, r0 bf 1b mov.l .L_copyoutstr_VM_MAXUSER_ADDRESS, r1 cmp/hs r1, r5 bt 3f mov #ENAMETOOLONG, r3 3: tst r7, r7 /* set lencopied if needed */ bt 4f mov r4, r1 sub r8, r1 mov.l r1, @r7 4: mov.l .L_copyoutstr_curpcb, r1 /* clear fault handler */ mov.l @r1, r2 mov #0, r1 mov.l r1, @(PCB_ONFAULT,r2) mov r3, r0 rts mov.l @r15+, r8 5: bra 4b mov #EFAULT, r3 .align 2 .L_copyoutstr_onfault: .long 5b .L_copyoutstr_VM_MAXUSER_ADDRESS: .long VM_MAXUSER_ADDRESS .L_copyoutstr_curpcb: .long curpcb SET_ENTRY_SIZE(copyoutstr) /* * LINTSTUB: Func: int _copyinstr(const void *src, void *dst, size_t maxlen, size_t *lencopied) * Copy a NUL-terminated string, at most maxlen characters long, * from the user address space. Return the number of characters * copied (including the NUL) in *lencopied. If the string is * too long, return ENAMETOOLONG; else return 0 or EFAULT. */ ENTRY(_copyinstr) mov.l r8, @-r15 mov #EFAULT, r3 /* assume there was a problem */ mov r4, r8 mov.l .L_copyinstr_curpcb, r1 /* set fault handler */ mov.l @r1, r2 mov.l .L_copyinstr_onfault, r1 mov.l r1, @(PCB_ONFAULT,r2) mov.l .L_copyinstr_VM_MAXUSER_ADDRESS, r1 cmp/hi r1, r4 /* bomb if src isn't in user space */ bt 4f mov r1, r0 sub r4, r0 cmp/hi r6, r0 /* don't beyond user space */ bf 2f bra 2f mov r6, r0 .align 2 1: mov.b @r4+, r1 /* copy str */ mov.b r1, @r5 extu.b r1, r1 add #1, r5 tst r1, r1 bf 2f bra 3f mov #0, r3 .align 2 2: add #-1, r0 cmp/eq #-1, r0 bf 1b mov.l .L_copyinstr_VM_MAXUSER_ADDRESS, r1 cmp/hs r1, r4 bt 3f mov #ENAMETOOLONG, r3 3: tst r7, r7 /* set lencopied if needed */ bt 4f mov r4, r1 sub r8, r1 mov.l r1, @r7 4: mov.l .L_copyinstr_curpcb, r1 /* clear fault handler */ mov.l @r1, r2 mov #0, r1 mov.l r1, @(PCB_ONFAULT,r2) mov r3, r0 rts mov.l @r15+, r8 5: bra 4b mov #EFAULT, r3 .align 2 .L_copyinstr_onfault: .long 5b .L_copyinstr_VM_MAXUSER_ADDRESS: .long VM_MAXUSER_ADDRESS .L_copyinstr_curpcb: .long curpcb SET_ENTRY_SIZE(_copyinstr) /* * LINTSTUB: Func: int kcopy(const void *src, void *dst, size_t len) */ ENTRY(kcopy) mov.l r8, @-r15 mov.l r14, @-r15 sts.l pr, @-r15 mov r15, r14 mov r4, r3 mov.l .L_kcopy_curpcb, r1 mov.l @r1, r2 mov.l @(PCB_ONFAULT,r2) ,r8 /* save old fault handler */ mov.l .L_kcopy_onfault, r1 mov.l r1, @(PCB_ONFAULT,r2) /* set fault handler */ mov.l .L_kcopy_memcpy, r1 mov r5, r4 jsr @r1 /* memcpy(dst, src, len) */ mov r3, r5 mov #0, r0 1: mov.l .L_kcopy_curpcb, r1 /* restore fault handler */ mov.l @r1, r2 mov.l r8, @(PCB_ONFAULT,r2) mov r14, r15 lds.l @r15+, pr mov.l @r15+, r14 rts mov.l @r15+, r8 2: bra 1b mov #EFAULT, r0 .align 2 .L_kcopy_onfault: .long 2b .L_kcopy_curpcb: .long curpcb .L_kcopy_memcpy: .long memcpy SET_ENTRY_SIZE(kcopy) #if defined(DDB) /* * LINTSTUB: Func: int setjmp(label_t *jmpbuf) */ ENTRY(setjmp) add #4*9, r4 mov.l r8, @-r4 mov.l r9, @-r4 mov.l r10, @-r4 mov.l r11, @-r4 mov.l r12, @-r4 mov.l r13, @-r4 mov.l r14, @-r4 mov.l r15, @-r4 sts.l pr, @-r4 rts xor r0, r0 SET_ENTRY_SIZE(setjmp) /* * LINTSTUB: Func: void longjmp(label_t *jmpbuf) */ ENTRY(longjmp) lds.l @r4+, pr mov.l @r4+, r15 mov.l @r4+, r14 mov.l @r4+, r13 mov.l @r4+, r12 mov.l @r4+, r11 mov.l @r4+, r10 mov.l @r4+, r9 mov.l @r4+, r8 rts mov #1, r0 /* return 1 from setjmp */ SET_ENTRY_SIZE(longjmp) #endif /* DDB */