/* * Copyright © 2016 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS * IN THE SOFTWARE. * * Authors: * Pierre-Louis Bossart * Jerome Anand * based on VED patches * */ /** * DOC: LPE Audio integration for HDMI or DP playback * * Motivation: * Atom platforms (e.g. valleyview and cherryTrail) integrates a DMA-based * interface as an alternative to the traditional HDaudio path. While this * mode is unrelated to the LPE aka SST audio engine, the documentation refers * to this mode as LPE so we keep this notation for the sake of consistency. * * The interface is handled by a separate standalone driver maintained in the * ALSA subsystem for simplicity. To minimize the interaction between the two * subsystems, a bridge is setup between the hdmi-lpe-audio and i915: * 1. Create a platform device to share MMIO/IRQ resources * 2. Make the platform device child of i915 device for runtime PM. * 3. Create IRQ chip to forward the LPE audio irqs. * the hdmi-lpe-audio driver probes the lpe audio device and creates a new * sound card * * Threats: * Due to the restriction in Linux platform device model, user need manually * uninstall the hdmi-lpe-audio driver before uninstalling i915 module, * otherwise we might run into use-after-free issues after i915 removes the * platform device: even though hdmi-lpe-audio driver is released, the modules * is still in "installed" status. * * Implementation: * The MMIO/REG platform resources are created according to the registers * specification. * When forwarding LPE audio irqs, the flow control handler selection depends * on the platform, for example on valleyview handle_simple_irq is enough. * */ #include #include #include #include #include #include #include #include #include "i915_drv.h" #include "i915_irq.h" #include "i915_reg.h" #include "intel_de.h" #include "intel_lpe_audio.h" #include "intel_pci_config.h" #define HAS_LPE_AUDIO(dev_priv) ((dev_priv)->display.audio.lpe.platdev != NULL) static struct platform_device * lpe_audio_platdev_create(struct drm_i915_private *dev_priv) { STUB(); return NULL; #ifdef notyet struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); struct platform_device_info pinfo = {}; struct resource *rsc; struct platform_device *platdev; struct intel_hdmi_lpe_audio_pdata *pdata; pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); if (!pdata) return ERR_PTR(-ENOMEM); rsc = kcalloc(2, sizeof(*rsc), GFP_KERNEL); if (!rsc) { kfree(pdata); return ERR_PTR(-ENOMEM); } rsc[0].start = rsc[0].end = dev_priv->display.audio.lpe.irq; rsc[0].flags = IORESOURCE_IRQ; rsc[0].name = "hdmi-lpe-audio-irq"; rsc[1].start = pci_resource_start(pdev, GEN4_GTTMMADR_BAR) + I915_HDMI_LPE_AUDIO_BASE; rsc[1].end = pci_resource_start(pdev, GEN4_GTTMMADR_BAR) + I915_HDMI_LPE_AUDIO_BASE + I915_HDMI_LPE_AUDIO_SIZE - 1; rsc[1].flags = IORESOURCE_MEM; rsc[1].name = "hdmi-lpe-audio-mmio"; pinfo.parent = dev_priv->drm.dev; pinfo.name = "hdmi-lpe-audio"; pinfo.id = -1; pinfo.res = rsc; pinfo.num_res = 2; pinfo.data = pdata; pinfo.size_data = sizeof(*pdata); pinfo.dma_mask = DMA_BIT_MASK(32); pdata->num_pipes = INTEL_NUM_PIPES(dev_priv); pdata->num_ports = IS_CHERRYVIEW(dev_priv) ? 3 : 2; /* B,C,D or B,C */ pdata->port[0].pipe = -1; pdata->port[1].pipe = -1; pdata->port[2].pipe = -1; mtx_init(&pdata->lpe_audio_slock, IPL_TTY); platdev = platform_device_register_full(&pinfo); kfree(rsc); kfree(pdata); if (IS_ERR(platdev)) { drm_err(&dev_priv->drm, "Failed to allocate LPE audio platform device\n"); return platdev; } pm_runtime_no_callbacks(&platdev->dev); return platdev; #endif } static void lpe_audio_platdev_destroy(struct drm_i915_private *dev_priv) { /* XXX Note that platform_device_register_full() allocates a dma_mask * and never frees it. We can't free it here as we cannot guarantee * this is the last reference (i.e. that the dma_mask will not be * used after our unregister). So ee choose to leak the sizeof(u64) * allocation here - it should be fixed in the platform_device rather * than us fiddle with its internals. */ #ifdef __linux__ platform_device_unregister(dev_priv->display.audio.lpe.platdev); #endif } #ifdef __linux__ static void lpe_audio_irq_unmask(struct irq_data *d) { } static void lpe_audio_irq_mask(struct irq_data *d) { } static struct irq_chip lpe_audio_irqchip = { .name = "hdmi_lpe_audio_irqchip", .irq_mask = lpe_audio_irq_mask, .irq_unmask = lpe_audio_irq_unmask, }; #endif static int lpe_audio_irq_init(struct drm_i915_private *dev_priv) { STUB(); return -ENOSYS; #ifdef notyet int irq = dev_priv->display.audio.lpe.irq; drm_WARN_ON(&dev_priv->drm, !intel_irqs_enabled(dev_priv)); irq_set_chip_and_handler_name(irq, &lpe_audio_irqchip, handle_simple_irq, "hdmi_lpe_audio_irq_handler"); return irq_set_chip_data(irq, dev_priv); #endif } static bool lpe_audio_detect(struct drm_i915_private *dev_priv) { return false; #ifdef notyet int lpe_present = false; if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { static const struct pci_device_id atom_hdaudio_ids[] = { /* Baytrail */ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0f04)}, /* Braswell */ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2284)}, {} }; if (!pci_dev_present(atom_hdaudio_ids)) { drm_info(&dev_priv->drm, "HDaudio controller not detected, using LPE audio instead\n"); lpe_present = true; } } return lpe_present; #endif } static int lpe_audio_setup(struct drm_i915_private *dev_priv) { STUB(); return -ENOSYS; #ifdef notyet int ret; dev_priv->display.audio.lpe.irq = irq_alloc_desc(0); if (dev_priv->display.audio.lpe.irq < 0) { drm_err(&dev_priv->drm, "Failed to allocate IRQ desc: %d\n", dev_priv->display.audio.lpe.irq); ret = dev_priv->display.audio.lpe.irq; goto err; } drm_dbg(&dev_priv->drm, "irq = %d\n", dev_priv->display.audio.lpe.irq); ret = lpe_audio_irq_init(dev_priv); if (ret) { drm_err(&dev_priv->drm, "Failed to initialize irqchip for lpe audio: %d\n", ret); goto err_free_irq; } dev_priv->display.audio.lpe.platdev = lpe_audio_platdev_create(dev_priv); if (IS_ERR(dev_priv->display.audio.lpe.platdev)) { ret = PTR_ERR(dev_priv->display.audio.lpe.platdev); drm_err(&dev_priv->drm, "Failed to create lpe audio platform device: %d\n", ret); goto err_free_irq; } /* enable chicken bit; at least this is required for Dell Wyse 3040 * with DP outputs (but only sometimes by some reason!) */ intel_de_write(dev_priv, VLV_AUD_CHICKEN_BIT_REG, VLV_CHICKEN_BIT_DBG_ENABLE); return 0; err_free_irq: irq_free_desc(dev_priv->display.audio.lpe.irq); err: dev_priv->display.audio.lpe.irq = -1; dev_priv->display.audio.lpe.platdev = NULL; return ret; #endif } /** * intel_lpe_audio_irq_handler() - forwards the LPE audio irq * @dev_priv: the i915 drm device private data * * the LPE Audio irq is forwarded to the irq handler registered by LPE audio * driver. */ void intel_lpe_audio_irq_handler(struct drm_i915_private *dev_priv) { STUB(); #ifdef notyet int ret; if (!HAS_LPE_AUDIO(dev_priv)) return; ret = generic_handle_irq(dev_priv->display.audio.lpe.irq); if (ret) drm_err_ratelimited(&dev_priv->drm, "error handling LPE audio irq: %d\n", ret); #endif } /** * intel_lpe_audio_init() - detect and setup the bridge between HDMI LPE Audio * driver and i915 * @dev_priv: the i915 drm device private data * * Return: 0 if successful. non-zero if detection or * llocation/initialization fails */ int intel_lpe_audio_init(struct drm_i915_private *dev_priv) { int ret = -ENODEV; if (lpe_audio_detect(dev_priv)) { ret = lpe_audio_setup(dev_priv); if (ret < 0) drm_err(&dev_priv->drm, "failed to setup LPE Audio bridge\n"); } return ret; } /** * intel_lpe_audio_teardown() - destroy the bridge between HDMI LPE * audio driver and i915 * @dev_priv: the i915 drm device private data * * release all the resources for LPE audio <-> i915 bridge. */ void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv) { STUB(); #ifdef notyet if (!HAS_LPE_AUDIO(dev_priv)) return; lpe_audio_platdev_destroy(dev_priv); irq_free_desc(dev_priv->display.audio.lpe.irq); dev_priv->display.audio.lpe.irq = -1; dev_priv->display.audio.lpe.platdev = NULL; #endif } /** * intel_lpe_audio_notify() - notify lpe audio event * audio driver and i915 * @dev_priv: the i915 drm device private data * @cpu_transcoder: CPU transcoder * @port: port * @eld : ELD data * @ls_clock: Link symbol clock in kHz * @dp_output: Driving a DP output? * * Notify lpe audio driver of eld change. */ void intel_lpe_audio_notify(struct drm_i915_private *dev_priv, enum transcoder cpu_transcoder, enum port port, const void *eld, int ls_clock, bool dp_output) { #ifdef notyet unsigned long irqflags; struct intel_hdmi_lpe_audio_pdata *pdata; struct intel_hdmi_lpe_audio_port_pdata *ppdata; u32 audio_enable; if (!HAS_LPE_AUDIO(dev_priv)) return; pdata = dev_get_platdata(&dev_priv->display.audio.lpe.platdev->dev); ppdata = &pdata->port[port - PORT_B]; spin_lock_irqsave(&pdata->lpe_audio_slock, irqflags); audio_enable = intel_de_read(dev_priv, VLV_AUD_PORT_EN_DBG(port)); if (eld != NULL) { memcpy(ppdata->eld, eld, HDMI_MAX_ELD_BYTES); ppdata->pipe = cpu_transcoder; ppdata->ls_clock = ls_clock; ppdata->dp_output = dp_output; /* Unmute the amp for both DP and HDMI */ intel_de_write(dev_priv, VLV_AUD_PORT_EN_DBG(port), audio_enable & ~VLV_AMP_MUTE); } else { memset(ppdata->eld, 0, HDMI_MAX_ELD_BYTES); ppdata->pipe = -1; ppdata->ls_clock = 0; ppdata->dp_output = false; /* Mute the amp for both DP and HDMI */ intel_de_write(dev_priv, VLV_AUD_PORT_EN_DBG(port), audio_enable | VLV_AMP_MUTE); } if (pdata->notify_audio_lpe) pdata->notify_audio_lpe(dev_priv->display.audio.lpe.platdev, port - PORT_B); spin_unlock_irqrestore(&pdata->lpe_audio_slock, irqflags); #endif }