/* $OpenBSD: rmpproto.c,v 1.14 2021/10/24 21:24:19 deraadt Exp $ */ /* $NetBSD: rmpproto.c,v 1.5.2.1 1995/11/14 08:45:44 thorpej Exp $ */ /* * Copyright (c) 1988, 1992 The University of Utah and the Center * for Software Science (CSS). * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * the Center for Software Science of the University of Utah Computer * Science Department. CSS requests users of this software to return * to css-dist@cs.utah.edu any improvements that they make and grant * CSS redistribution rights. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)rmpproto.c 8.1 (Berkeley) 6/4/93 * * From: Utah Hdr: rmpproto.c 3.1 92/07/06 * Author: Jeff Forys, University of Utah CSS */ #include #include #include #include #include #include #include #include "defs.h" /* ** ProcessPacket -- determine packet type and do what's required. ** ** An RMP BOOT packet has been received. Look at the type field ** and process Boot Requests, Read Requests, and Boot Complete ** packets. Any other type will be dropped with a warning msg. ** ** Parameters: ** rconn - the new connection ** client - list of files available to this host ** ** Returns: ** Nothing. ** ** Side Effects: ** - If this is a valid boot request, it will be added to ** the linked list of outstanding requests (RmpConns). ** - If this is a valid boot complete, its associated ** entry in RmpConns will be deleted. ** - Also, unless we run out of memory, a reply will be ** sent to the host that sent the packet. */ void ProcessPacket(RMPCONN *rconn, CLIENT *client) { struct rmp_packet *rmp = &rconn->rmp; RMPCONN *rconnout; switch (rmp->r_type) { /* do what we came here to do */ case RMP_BOOT_REQ: /* boot request */ if ((rconnout = NewConn(rconn)) == NULL) return; /* * If the Session ID is 0xffff, this is a "probe" * packet and we do not want to add the connection * to the linked list of active connections. There * are two types of probe packets, if the Sequence * Number is 0 they want to know our host name, o/w * they want the name of the file associated with * the number spec'd by the Sequence Number. * * If this is an actual boot request, open the file * and send a reply. If SendBootRepl() does not * return 0, add the connection to the linked list * of active connections, otherwise delete it since * an error was encountered. */ if (ntohs(rmp->r_brq.rmp_session) == RMP_PROBESID) { if (WORDZE(rmp->r_brq.rmp_seqno)) (void) SendServerID(rconnout); else (void) SendFileNo(rmp, rconnout, client ? client->files : BootFiles); FreeConn(rconnout); } else { if (SendBootRepl(rmp, rconnout, client? client->files: BootFiles)) AddConn(rconnout); else FreeConn(rconnout); } break; case RMP_BOOT_REPL: /* boot reply (not valid) */ syslog(LOG_WARNING, "%s: sent a boot reply", EnetStr(rconn)); break; case RMP_READ_REQ: /* read request */ /* * Send a portion of the boot file. */ (void) SendReadRepl(rconn); break; case RMP_READ_REPL: /* read reply (not valid) */ syslog(LOG_WARNING, "%s: sent a read reply", EnetStr(rconn)); break; case RMP_BOOT_DONE: /* boot complete */ /* * Remove the entry from the linked list of active * connections. */ (void) BootDone(rconn); break; default: /* unknown RMP packet type */ syslog(LOG_WARNING, "%s: unknown packet type (%u)", EnetStr(rconn), rmp->r_type); } } /* ** SendServerID -- send our host name to who ever requested it. ** ** Parameters: ** rconn - the reply packet to be formatted. ** ** Returns: ** 1 on success, 0 on failure. ** ** Side Effects: ** none. */ int SendServerID(RMPCONN *rconn) { struct rmp_packet *rpl; char *src, *dst; u_int8_t *size; rpl = &rconn->rmp; /* cache ptr to RMP packet */ /* * Set up assorted fields in reply packet. */ rpl->r_brpl.rmp_type = RMP_BOOT_REPL; rpl->r_brpl.rmp_retcode = RMP_E_OKAY; ZEROWORD(rpl->r_brpl.rmp_seqno); rpl->r_brpl.rmp_session = 0; rpl->r_brpl.rmp_version = htons(RMP_VERSION); size = &rpl->r_brpl.rmp_flnmsize; /* ptr to length of host name */ /* * Copy our host name into the reply packet incrementing the * length as we go. Stop at RMP_HOSTLEN or the first dot. */ src = MyHost; dst = (char *) &rpl->r_brpl.rmp_flnm; for (*size = 0; *size < RMP_HOSTLEN; (*size)++) { if (*src == '.' || *src == '\0') break; *dst++ = *src++; } rconn->rmplen = RMPBOOTSIZE(*size); /* set packet length */ return(SendPacket(rconn)); /* send packet */ } /* ** SendFileNo -- send the name of a bootable file to the requester. ** ** Parameters: ** req - RMP BOOT packet containing the request. ** rconn - the reply packet to be formatted. ** filelist - list of files available to the requester. ** ** Returns: ** 1 on success, 0 on failure. ** ** Side Effects: ** none. */ int SendFileNo(struct rmp_packet *req, RMPCONN *rconn, char *filelist[]) { struct rmp_packet *rpl; char *src, *dst; u_int8_t *size; int i; GETWORD(req->r_brpl.rmp_seqno, i); /* SeqNo is really FileNo */ rpl = &rconn->rmp; /* cache ptr to RMP packet */ /* * Set up assorted fields in reply packet. */ rpl->r_brpl.rmp_type = RMP_BOOT_REPL; PUTWORD(i, rpl->r_brpl.rmp_seqno); i--; rpl->r_brpl.rmp_session = 0; rpl->r_brpl.rmp_version = htons(RMP_VERSION); size = &rpl->r_brpl.rmp_flnmsize; /* ptr to length of filename */ *size = 0; /* init length to zero */ /* * Copy the file name into the reply packet incrementing the * length as we go. Stop at end of string or when RMPBOOTDATA * characters have been copied. Also, set return code to * indicate success or "no more files". */ if (i < C_MAXFILE && filelist[i] != NULL) { src = filelist[i]; dst = (char *)&rpl->r_brpl.rmp_flnm; for (; *src && *size < RMPBOOTDATA; (*size)++) { if (*src == '\0') break; *dst++ = *src++; } rpl->r_brpl.rmp_retcode = RMP_E_OKAY; } else rpl->r_brpl.rmp_retcode = RMP_E_NODFLT; rconn->rmplen = RMPBOOTSIZE(*size); /* set packet length */ return(SendPacket(rconn)); /* send packet */ } /* ** SendBootRepl -- open boot file and respond to boot request. ** ** Parameters: ** req - RMP BOOT packet containing the request. ** rconn - the reply packet to be formatted. ** filelist - list of files available to the requester. ** ** Returns: ** 1 on success, 0 on failure. ** ** Side Effects: ** none. */ int SendBootRepl(struct rmp_packet *req, RMPCONN *rconn, char *filelist[]) { int retval; char *filename, filepath[RMPBOOTDATA+1]; RMPCONN *oldconn; struct rmp_packet *rpl; char *src, *dst1, *dst2; u_int8_t i; /* * If another connection already exists, delete it since we * are obviously starting again. */ if ((oldconn = FindConn(rconn)) != NULL) { syslog(LOG_WARNING, "%s: dropping existing connection", EnetStr(oldconn)); RemoveConn(oldconn); } rpl = &rconn->rmp; /* cache ptr to RMP packet */ /* * Set up assorted fields in reply packet. */ rpl->r_brpl.rmp_type = RMP_BOOT_REPL; COPYWORD(req->r_brq.rmp_seqno, rpl->r_brpl.rmp_seqno); rpl->r_brpl.rmp_session = htons(GenSessID()); rpl->r_brpl.rmp_version = htons(RMP_VERSION); rpl->r_brpl.rmp_flnmsize = req->r_brq.rmp_flnmsize; /* * Copy file name to `filepath' string, and into reply packet. */ dst1 = filepath; dst2 = &rpl->r_brpl.rmp_flnm; if (req->r_brq.rmp_flnmsize) src = &req->r_brq.rmp_flnm; else { /* no file supplied, substitute the first one */ src = filelist[0]; req->r_brq.rmp_flnmsize = strlen(src); } for (i = 0; i < req->r_brq.rmp_flnmsize; i++) *dst1++ = *dst2++ = *src++; *dst1 = '\0'; /* * If we are booting HP-UX machines, their secondary loader will * ask for files like "/hp-ux". As a security measure, we do not * allow boot files to lay outside the boot directory (unless they * are purposely link'd out. So, make `filename' become the path- * stripped file name and spoof the client into thinking that it * really got what it wanted. */ if ((filename = strrchr(filepath,'/')) != NULL) filename++; else filename = filepath; /* * Check that this is a valid boot file name. */ for (i = 0; i < C_MAXFILE && filelist[i] != NULL; i++) if (STREQN(filename, filelist[i])) goto match; /* * Invalid boot file name, set error and send reply packet. */ rpl->r_brpl.rmp_retcode = RMP_E_NOFILE; retval = 0; goto sendpkt; match: /* * This is a valid boot file. Open the file and save the file * descriptor associated with this connection and set success * indication. If the file couldnt be opened, set error: * "no such file or dir" - RMP_E_NOFILE * "file table overflow" - RMP_E_BUSY * "too many open files" - RMP_E_BUSY * anything else - RMP_E_OPENFILE */ if ((rconn->bootfd = open(filename, O_RDONLY)) == -1) { rpl->r_brpl.rmp_retcode = (errno == ENOENT)? RMP_E_NOFILE: (errno == EMFILE || errno == ENFILE)? RMP_E_BUSY: RMP_E_OPENFILE; retval = 0; } else { rpl->r_brpl.rmp_retcode = RMP_E_OKAY; retval = 1; } sendpkt: syslog(LOG_INFO, "%s: request to boot %s (%s)", EnetStr(rconn), filename, retval? "granted": "denied"); rconn->rmplen = RMPBOOTSIZE(rpl->r_brpl.rmp_flnmsize); return (retval & SendPacket(rconn)); } /* ** SendReadRepl -- send a portion of the boot file to the requester. ** ** Parameters: ** rconn - the reply packet to be formatted. ** ** Returns: ** 1 on success, 0 on failure. ** ** Side Effects: ** none. */ int SendReadRepl(RMPCONN *rconn) { int retval = 0; RMPCONN *oldconn; struct rmp_packet *rpl, *req; int size = 0; int madeconn = 0; /* * Find the old connection. If one doesnt exist, create one only * to return the error code. */ if ((oldconn = FindConn(rconn)) == NULL) { if ((oldconn = NewConn(rconn)) == NULL) return(0); syslog(LOG_ERR, "SendReadRepl: no active connection (%s)", EnetStr(rconn)); madeconn++; } req = &rconn->rmp; /* cache ptr to request packet */ rpl = &oldconn->rmp; /* cache ptr to reply packet */ if (madeconn) { /* no active connection above; abort */ rpl->r_rrpl.rmp_retcode = RMP_E_ABORT; retval = 1; goto sendpkt; } /* * Make sure Session ID's match. */ if (ntohs(req->r_rrq.rmp_session) != ((rpl->r_type == RMP_BOOT_REPL)? ntohs(rpl->r_brpl.rmp_session): ntohs(rpl->r_rrpl.rmp_session))) { syslog(LOG_ERR, "SendReadRepl: bad session id (%s)", EnetStr(rconn)); rpl->r_rrpl.rmp_retcode = RMP_E_BADSID; retval = 1; goto sendpkt; } /* * If the requester asks for more data than we can fit, * silently clamp the request size down to RMPREADDATA. * * N.B. I do not know if this is "legal", however it seems * to work. This is necessary for bpfwrite() on machines * with MCLBYTES less than 1514. */ if (ntohs(req->r_rrq.rmp_size) > RMPREADDATA) req->r_rrq.rmp_size = htons(RMPREADDATA); /* * Position read head on file according to info in request packet. */ GETWORD(req->r_rrq.rmp_offset, size); if (lseek(oldconn->bootfd, (off_t)size, SEEK_SET) == -1) { syslog(LOG_ERR, "SendReadRepl: lseek: %m (%s)", EnetStr(rconn)); rpl->r_rrpl.rmp_retcode = RMP_E_ABORT; retval = 1; goto sendpkt; } /* * Read data directly into reply packet. */ if ((size = read(oldconn->bootfd, &rpl->r_rrpl.rmp_data, (int) ntohs(req->r_rrq.rmp_size))) <= 0) { if (size == -1) { syslog(LOG_ERR, "SendReadRepl: read: %m (%s)", EnetStr(rconn)); rpl->r_rrpl.rmp_retcode = RMP_E_ABORT; } else { rpl->r_rrpl.rmp_retcode = RMP_E_EOF; } retval = 1; goto sendpkt; } /* * Set success indication. */ rpl->r_rrpl.rmp_retcode = RMP_E_OKAY; sendpkt: /* * Set up assorted fields in reply packet. */ rpl->r_rrpl.rmp_type = RMP_READ_REPL; COPYWORD(req->r_rrq.rmp_offset, rpl->r_rrpl.rmp_offset); rpl->r_rrpl.rmp_session = req->r_rrq.rmp_session; oldconn->rmplen = RMPREADSIZE(size); /* set size of packet */ retval &= SendPacket(oldconn); /* send packet */ if (madeconn) /* clean up after ourself */ FreeConn(oldconn); return (retval); } /* ** BootDone -- free up memory allocated for a connection. ** ** Parameters: ** rconn - incoming boot complete packet. ** ** Returns: ** 1 on success, 0 on failure. ** ** Side Effects: ** none. */ int BootDone(RMPCONN *rconn) { RMPCONN *oldconn; struct rmp_packet *rpl; /* * If we cant find the connection, ignore the request. */ if ((oldconn = FindConn(rconn)) == NULL) { syslog(LOG_ERR, "BootDone: no existing connection (%s)", EnetStr(rconn)); return(0); } rpl = &oldconn->rmp; /* cache ptr to RMP packet */ /* * Make sure Session ID's match. */ if (ntohs(rconn->rmp.r_rrq.rmp_session) != ((rpl->r_type == RMP_BOOT_REPL)? ntohs(rpl->r_brpl.rmp_session): ntohs(rpl->r_rrpl.rmp_session))) { syslog(LOG_ERR, "BootDone: bad session id (%s)", EnetStr(rconn)); return(0); } RemoveConn(oldconn); /* remove connection */ syslog(LOG_INFO, "%s: boot complete", EnetStr(rconn)); return(1); } /* ** SendPacket -- send an RMP packet to a remote host. ** ** Parameters: ** rconn - packet to be sent. ** ** Returns: ** 1 on success, 0 on failure. ** ** Side Effects: ** none. */ int SendPacket(RMPCONN *rconn) { /* * Set Ethernet Destination address to Source (BPF and the enet * driver will take care of getting our source address set). */ bcopy((char *)&rconn->rmp.hp_hdr.saddr[0], (char *)&rconn->rmp.hp_hdr.daddr[0], RMP_ADDRLEN); rconn->rmp.hp_hdr.len = htons(rconn->rmplen - sizeof(struct hp_hdr)); /* * Reverse 802.2/HP Extended Source & Destination Access Pts. */ rconn->rmp.hp_llc.dxsap = htons(HPEXT_SXSAP); rconn->rmp.hp_llc.sxsap = htons(HPEXT_DXSAP); /* * Last time this connection was active. */ (void) gettimeofday(&rconn->tstamp, NULL); if (DbgFp != NULL) /* display packet */ DispPkt(rconn,DIR_SENT); /* * Send RMP packet to remote host. */ return(BpfWrite(rconn)); }